基于CA和LS-SVM的TE过程多模型建模

针对TE化工过程高度非线性、复杂性的特点,本文提出了一种基于相关分析和最小二乘支持向量机对TE过程进行多模型建模方法,以提高模型性能。首先对TE过程采用相关分析法划分为3个子系统,对每个子系统分别采用基于C-均值聚类的最小二乘支持向量机建模和基于k均值聚类的最小二乘支持向量机多模型建模。实验表明,基于K-均值聚类的多模型建模能简化计算、提高模型精度、并且能更好的预测模型输出。     

基于最小二乘支持向量机回归的背景偏振光谱二向反射分布建模分析

详细分析了土壤背景偏振光谱二向反射分布函数与探测角及探测方位角之间关系.提出了基于最小二乘支持向量机回归的偏振光谱二向反射分布函数建模,将有限实验观测条件下测量得到的少数偏振光谱二向反射分布函数扩展到2π空间范围内任意入射及观测条件.通过模型结果和实验结果分析比较,表明该模型能很好地满足准确度要求.     

基于集成最小二乘支持向量机方法的近红外光谱分析

针对近红外（Near Infrared,NIR）光谱测量中的小样本问题。本文提出了一种集成最小二乘支持向量机（Ensemble Least Squares Support Vector Machine,ELS-SVM）新算法。首先使用随机子空间算法（Random Subspace Method,RSM）原始高维变量空间划分为若干个低维度的子空间,然后分别在各个子空间建立最小二乘支持向量机（LS-SVM）模型,最后构造一个集成结果来进行预测。针对一批柴油样本的实验结果表明,本法对柴油十六烷值的预测精度优于传统的LS-SVM方法。     

近红外光谱法在红曲菌固态发酵过程参数检测中的应用

研究了近红外光谱技术快速检测红曲菌固态发酵过程参数水分含量和pH值的可行性。针对传统基于间隔策略波长选择方法忽略非线性因素的缺点,采用一种基于最小二乘支持向量机(Least squares support vector machines,LS-SVM)非线性模型的波长筛选算法：联合区间最小二乘支持向量机(Synergy interval least squares support vector machines,siLS-SVM),并将新算法与相关系数法、iPLS算法、siPLS算法对比。实验结果显示,联合siLS-SVM算法和LS-SVM模型取得了最好的预测效果,水分含量、pH值的预测集相关系数(Rp)分别为0.962 1、0.976 1,预测均方根误差(RMSEP)分别为0.012 9、0.145 2,表明模型具有较好的拟合度和预测性能。应用近红外光谱法进行红曲菌固态发酵过程的水分含量和pH值的快速检测可行,该方法为进一步实现其过程参数的在线检测及发酵条件优化提供了技术基础。     

高光谱成像技术的柚类品种鉴别研究

柚类种质和品种资源繁多,现有的柚类品种鉴别方法检测时间长,费用高。旨在利用高光谱成像技术探索主要柚类品种快速识别的可行性。试验选用4个具有代表性的柚类品种,利用高光谱成像技术,采集240个叶片样本(60个/品种)上表面和下表面的高光谱图像。高光谱图像标定后,提取样本感兴趣区域平均光谱信息作为样本的光谱进行分析。利用Kennard-Stone法将样本划分为校正集(192个)和验证集(48个)。采用多元散射校正(MSC)和标准正态变量变换(SNV)对原始光谱曲线进行预处理后,分别采用主成分分析 (PCA)和连续投影算法 (SPA )提取最佳主成分和有效波长,并将其作为最小二乘支持向量机(LS-SVM)的输入变量,建立基于叶片上表面和下表面光谱信息的PCA-LS-SVM和SPA-LS-SVM 模型。结果显示,基于叶片上表面光谱信息建立的PCA-LS-SVM和SPA-LS-SVM 模型对建模集样本的识别正确率分别为99.46%和98.44%,对预测集样本的识别正确率均为95.83%。基于叶片下表面光谱信息建立的PCA-LS-SVM和SPA-LS-SVM模型对建模集样本和预测集样本的识别正确率皆为100%。表明,利用高光谱成像技术结合PCA-LS-SVM和SPA-LS-SVM可实现柚类品种的快速鉴别,叶片下表面光谱信息鉴别效果优于叶片上表面。该研究为柚类的品种快速鉴别提供了一种新方法。     

PSO优化LS-SVM在模拟电路故障预测中的应用

针对模拟电路故障预测的特点,提出一种基于PSO优化LS-SVM惩罚因子和核参数的模拟电路故障预测方法。利用小波包分解重构构造能量特征向量,通过计算PPMCC和欧氏距离来表征电路中元件的健康程度,定义为健康度,由此推导出电路发生故障时该元件的故障阈值。应用PSO优化的LS-SVM模型来实现模拟电路的故障预测,预测各个时间点的健康度变化轨迹并估计模拟电路的剩余寿命。通过仿真实验得知,该方法简单便捷,能够有效实现模拟电路的故障预测,具有较好的实用性。     

Short-wave near-infrared spectroscopy analysis of major compounds in milk powder and wavelength assignment

In this study, short-wave near-infrared (NIR) spectroscopy at 800–1050 nm region was investigated for the analysis of main compounds in milk powder. Through quantitative analysis, the feasibility is further demonstrated for the simultaneous measurement of fat, proteins and carbohydrate in milk powder. Two models, partial least-squares and least-squares support vector machine, were compared and utilized for regression coefficients and loading weights. The affect of standard normal variate spectral pretreatment to model performance was evaluated. Based on the resulted coefficients and loading weights, interesting wavelength regions of nutrition in milk powder are screened and the assignment of all specific wavelengths is firstly proposed in the details associated with chemical base. Instead of the whole short-wave NIR spectral data, these assigned wavelengths which can be reliably exploited were used for the content determination. Compared with other spectroscopy technique, assigned short-wave NIR spectral wavelengths did a good work. Determination coefficients for prediction are 0.981, 0.984, and 0.982, respectively for three components. The proposed wavelength assignment in the short-wave NIR region could be used for the component contents determination of milk powder, and could be as a guidance to interpret the spectra of milk powder.     

Variable-weighted least-squares support vector machine for multivariate spectral analysis

Multivariate spectral analysis has been widely applied in chemistry and other fields. Spectral data consisting of measurements at hundreds and even thousands of analytical channels can now be obtained in a few seconds. It is widely accepted that before a multivariate regression model is built, a well-performed variable selection can be helpful to improve the predictive ability of the model. In this paper, the concept of traditional wavelength variable selection has been extended and the idea of variable weighting is incorporated into least-squares support vector machine (LS-SVM). A recently proposed global optimization method, particle swarm optimization (PSO) algorithm is used to search for the weights of variables and the hyper-parameters involved in LS-SVM optimizing the training of a calibration set and the prediction of an independent validation set. All the computation process of this method is automatic. Two real data sets are investigated and the results are compared those of PLS, uninformative variable elimination-PLS (UVE-PLS) and LS-SVM models to demonstrate the advantages of the proposed method.     

基于最小二乘支持向量机的番茄汁糖酸度分析研究

近红外光谱应用于农产品内部品质无损检测的方法引起人们的广泛关注,在分析过程中建立一个稳定可靠的模型用于处理非线性数据集是十分重要的,也是有一定难度的。目前常用的偏最小二乘(PLS)、主成分回归(PCR)以及逐步多元线性回归(SMLR)等方法还不能解决这类问题。文章提出了将基于统计学原理的最小二乘支持向量机(LS-SVM)回归方法用于番茄汁的近红外(NIR)光谱分析,预测番茄汁品质(糖度和有效酸度)。运用LS-SVM方法以67个番茄汁样本建模,采用高斯径向基函数(RBF)为核函数,对33个样本进行糖酸度预测,糖度的相关系数为0.990 25,均方根标准预测误差为0.0056° Brix;有效酸度的相关系数为0.967 5,均方根标准预测误差为0.024 5。结果表明,LS-SVM方法要优于PLS和PCR建模方法,是一种快速、准确的近红外光谱分析方法。