红外单站多目标跟踪算法研究

利用IRST(红外搜索与跟踪)系统所获取的各目标的角度及其红外光谱辐射功率和信息，通过对红外光谱辅射功率和的相关处理，运用选优的JPDA（联合概率数据关联）算法与IMM（交互多模型）算法实现了IRST系统的单站多目标跟踪，并通过两个仿真场景对算法性能进行了检验.仿真结果表明：在跟踪开始阶段，两个场景中的每个目标都能获得高精度的跟踪;当目标编队飞行时，算法能对各目标进行有效的跟踪，而且跟踪精确度也是令人满意的;当目标交叉飞行时，跟踪的误差明显加大，随着时间的延续，对远距离目标会失去跟踪能力，但对近距离目标仍能进行有效的跟踪.     

�����װ�õĻԹ�ŵ�����

在四阳极直流放电装置上,测量并分析了辉光放电的电流-电压和发光特征随气压的变化关系。结果表明,采用稳流放电模式比稳压放电具有更宽的稳定放电气压和电流范围,能在从1～800Pa的较宽气压范围内实现氦气辉光放电,放电电流可达到500mA左右。随着电极表面亮斑的变化,对于同一气压,在低电流区,放电电压几乎成指数增长;随电流增大,电压的增长速度变缓;对于高的气压,碰撞频率的增大使得电压随电流升高的速率变小。分析表明,放电处于异常辉光区。从放电管的CCD图像可以看出,对于同一放电电流,随气压的升高,等离子体往阴极收缩。     

Propagation properties of vectorial elliptical Gaussian beams beyond the paraxial approximation

Starting from the vectorial Rayleigh diffraction integral formula and without using the far-field approximation, a solution of the wave equation beyond the paraxial approximation is found, which represents vectorial non-paraxial elliptical Gaussian beams in free space. The far-field expressions for non-paraxial Gaussian beams and elliptical Gaussian beams can be regarded as special cases treated in this paper. Some basic propagation properties of vectorial non-paraxial elliptical Gaussian beams, including the irradiance distribution, phase term, beam widths and divergence angles are studied. Numerical results are given and illustrated.     

Irradiance fluctuations of partially coherent super Lorentz Gaussian beams

By using the semi-analytic approach introduced earlier, we formulate and subsequently evaluate the irradiance fluctuations of partially coherent super Lorentz Gaussian beams for orders of 10 and 11. Within the range of examined source and propagation conditions, our calculations show that there will be less fluctuations at short propagation distances as the Lorentzian property is increased. But the reverse will be applicable, if the longer propagation distances are considered. The use of focusing will cause reductions, particularly for beams with increased Lorentzian property.     

IRST系统的单站机动目标跟踪算法研究

在传统的IRST（红外搜索与跟踪）系统的角测量基础上,增加了红外探测器对目标红外辐射的响应信息这一测量项,且将相邻两次测量的目标红外光谱辐射功率之比作为伪测量,以消除目标红外光谱辐射强度不确定所产生的影响,并由此构造了机动目标跟踪的IMM（交互多模型）算法. 通过跟踪一个高机动目标的仿真过程,对算法性能进行了检验.仿真结果表明:当测量误差较小时,误差的变化对跟踪精度的影响不大,整个跟踪过程中,单个坐标轴上的均方差不超过7 m,而且,大多数时刻上的均方误差不超过3 m;当测量误差较大时,近距离（航迹前段和中段）的跟踪精度也是很高的,单个坐标轴上的均方差不超过5 m,但是,远距离的跟踪精度下降很快,最大误差达到110 m;速度误差与位置误差也有类似的结果.     

一种用于UV-A、UV-B波段地基观测的光谱辐射计

研制了一台可以在250 nm~400 nm波段测量绝对光谱辐亮度和绝对光谱辐照度的扫描式光谱辐射计,辐亮度辐照度相对定标准确度2％,可用于UV-A、UV-B紫外波段地基观测.通过在云南丽江地区(26°52＇N,100°13＇E)开展的大气散射光谱辐亮度和地面太阳直射紫外光谱辐照度观测试验,进一步检验了仪器的性能.观测数据与利用MODTRAN模式模拟计算值存在约8％的偏差,分析了产生偏差的相关因素.     

Theoretical expressions of temporal power spectra of irradiance fluctuations for optical waves propagating through weak non-Kolmogorov turbulence

The temporal power spectra of irradiance fluctuations reflect the frequency distribution of temporal statistical property of irradiance fluctuation. In this paper, new analytical expressions of the temporal power spectral models of irradiance fluctuations are developed for optical waves propagating through weak non-Kolmogorov turbulence with horizontal path. They are derived with the general modified atmospheric spectral model, and they consider the finite turbulence inner and outer scales, and have a general spectral power law value in the range of 3 to 4 instead of the standard power law value of 11/3. Numerical calculations are conducted to analyze the influence of non-Kolmogorov weak turbulence on the temporal power spectra of irradiance fluctuations.     

Impacts of ultrasonication time and surfactants on stability and optical properties of CuO,Fe3O4, and CNTs/water nanofluids for spectrum selective applications

The prime objective of the present experimental work is to evaluate the impact of ultrasonication time and surfactants on the optical characteristics (transmittance and absorbance) and stability of CuO/water, CNTs/water, and Fe₃O₄/water nanofluids to be used in spectrum selective applications. Two-step method with various ultrasonication times (30 min, 60 min, and 90 min) was employed to prepare nanofluids (having volume fractions of 0.004 % and 0.0004 %). Furthermore, various surfactants (anionic, cationic, and polymer) were added to the base fluid. The study results revealed that surfactants have a significant effect on the stability of nanofluids over ultrasonication time. The nanofluids prepared using sodium dodecylbenzene sulfonate (SDBS) have the highest zeta potential values than other surfactants used in the experimentation. The increase in transmittance of nanofluid was more prominent for lower concentration (0.0004 %) after one week of preparation. The concentration of nanoparticles, ultrasonication time, temperature, and surfactants influenced the optical characteristics of nanofluids. The most stabled CNTs nanofluid with 0.004 % concentration and 90 min of ultrasonication obtained an average of 67.6 % and 74.6 % higher absorbance than stabled CuO and Fe₃O₄ nanofluids, respectively. The irradiance transmitted through nanofluid was strongly dependent on the concentration and type of nanoparticles.     

Hyperboloid cylinder-plane lens for shaping laser diode array beam

A high coupling efficiency, simple structure refractive lens was designed; a hyperboloid cylinder-plane lens was proposed to reduce the divergence angle of the laser diode array beam in the fast axis direction. Based on the ray-tracing method, the shape of the input refractive surface of the designed lens is determined by numerical analysis, and designed as aspherical profile in one direction. When the beam from source point reaches the input surface of the lens, it is refracted and becomes a parallel output beam in the fast axis direction. The expressions for describing the irradiance behind the lens are also derived.     

Integrating cylinder radiometry and photometry: Application to radiant flux and irradiance measurements

In this paper, we present the detail calculations of the indirect spectral irradiance E(λ) as a function of the spectral radiant flux Φ_t(λ) of a radiating source. This relation is used to predict the integrating cylinder irradiance for a given input radiant flux as a function of the geometrical parameters and reflectivity called “multiplier constant”. The radiation transfer within a cylindrical enclosure composed of three different surfaces, the inside circular surface and the two bases in the ends, has been examined. The configuration factor is introduced. Then all the configuration factors needed for our calculation have been given in analytical form.