Addition-type polynorbornene with Si(CH3)3 side groups: Detailed study of gas permeation and thermodynamic properties

Polymerization of norbornene bearing Si(CH₃)₃ groups in the five position with the opening of double bonds was performed. By accurate selection of the ratios catalyst/co-catalyst and monomer/catalyst the samples with increased molecular mass (about 400,000) were obtained. Transport parameters of this, addition type poly(trimethylsilyl norbornene) (PTMSN) were measured using the gas chromatographic and mass spectrometric methods for different gases (H₂, He, O₂, N₂, CO₂, CH₄, C₂H₆, C₃H₈ and n-C₄H₁₀). Temperature dependence of the permeability coefficients (P) indicated that low activation energies of permeation (E_P) and diffusion (E_D) are characteristic for PTMSN. In some cases (CO₂, C₂H₆) negative E_P values were observed. Thermodynamics of vapor sorption in this polymer was studied using the inverse gas chromatography method. It was shown that PTMSN is characterized by very large solubility coefficients S similar to those of poly(trimethylsilyl propyne) (PTMSP). The comparison of the P, D, and S values of these highly permeable polymers showed that the greater permeability of PTMSP is determined by the larger D values. Application of different approaches for the determination of the size of microcavities in PTMSN indicated that this polymer is characterized by large size of microcavity (800–1200 ?³).     

The Effects of Beating,Web Forming and Sizing on the Surface Energy of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> Kraft Fibres Evaluated by Inverse Gas Chromatography

In this work attention has been focused on the effects of papermaking beating, web forming and sizing operations on the physical/chemical surface properties of bleached Eucalyptus globulus kraft fibres. Inverse gas chromatography (IGC) was used to determine the dispersive component of surface tension (γ_s^d) as well as the acidic/basic character (according to the Lewis concept) of the solid surfaces (pulp fibres and pulp handsheets). The results have shown that the main effect of beating is to increase the fibre's Lewis acidic character. Web forming caused a strong decrease in γ_s^d and significant increments in the adhesion works of both acidic and basic probes, lowering the ratio between the two. Nevertheless, the surface of handsheets still exhibited a dominant acidic character. The sizing operation did not change the dispersive component of the surface tension significantly but decreased the difference between the adhesion works of the acidic and basic probes, rendering the handsheet surface less Lewis acidic and more Lewis basic. Thus, although internal sizing is expected to strongly influence liquid spreading at the paper surface and liquid penetration of the fibre's network, it is concluded that beating and web forming lead to important changes in the surface energetic properties of the Eucalyptus globulus kraft fibres.     

反相气相色谱法表征聚丁二烯橡胶的表面性质

采用反相气相色谱技术测定了聚丁二烯橡胶的表面性质。以正己烷、正庚烷、正辛烷、正壬烷作为非极性探针测定其表面色散自由能,以二氯甲烷、三氯甲烷、丙酮、乙酸乙酯、乙醚和四氢呋喃作为极性探针测定其路易斯酸碱常数。经计算得出聚丁二烯橡胶在303、313、323、333和343 K的表面色散自由能分别为47.07、46.46、45.85、45.60和45.09 mJ/m2。结果表明,聚丁二烯橡胶表面色散自由能随着温度的升高呈线性降低,路易斯酸常数Ka为0.34,碱常数Kb为1.77,总酸碱作用能力2.11,该聚合物为弱碱性Lewis两性聚合物材料。此外还计算出聚丁二烯橡胶的酸碱作用吸附自由能（~ΔGsa）和吸附焓（~ΔHsa）。     

反气相色谱法测定环氧树脂的表面张力和溶解度参数

采用反气相色谱(IGC)测定了环氧E51树脂在30、40、50和60 ℃下的表面张力和溶解度参数。采用Schultz法,以正癸烷、正壬烷、正辛烷和正庚烷为非极性溶剂探针,计算了不同温度下环氧E51树脂的色散表面张力。根据Good-van Oss方程,以甲苯为碱性探针,二氯甲烷为酸性探针,计算得到环氧E51树脂的极性表面张力。结果表明,环氧E51树脂的色散表面张力和极性表面张力均随着温度的升高而线性降低。根据不同溶剂探针与树脂间的Flory-Huggins相互作用参数,采用DiPaola-Baranyi和Guillet方法计算得到环氧E51树脂在不同温度下的溶解度参数,其在30、40、50和60 ℃下分别为11.78、11.57、11.48和11.14 MPa1/2。根据表面张力、内聚能和溶解度参数的相互关系,计算得到不同温度下溶解度参数的色散和极性分量。结果发现,环氧E51树脂的溶解度参数的色散分量大于极性分量,且均随着温度的升高而降低。     

Hansen Solubility Parameters in the Analysis of Solvent–Solvent Interactions by Inverse Gas Chromatography

The Flory–Huggins interaction parameters, for a solute with pure nonvolatile solvents and with binary mixtures of nonvolatile solvents were evaluated using Inverse Gas Chromatography (IGC) data at 403.15 K. The five solvents used have similar structure and nearly the same molar volume and their mixtures form regular solutions. The values were used to evaluate the Hansen solubility parameters (HSP) for the pure solvents and mixed solvent systems. The HSP are plotted as a function of composition of the polar solvent. The dispersion component, , and the polar component, , exhibited negative deviation whereas the hydrogen bonding component, , showed positive deviation in the four mixtures. However, the total solubility parameter was found to be almost linear with composition in the four binary systems. Further the total solubility parameter, , was used to calculate the molar excess heat of vaporization for the solvents (C78 + POH, C78 + PCN, C78 + TTF, and C78 + TMO) that was found to be negative for C78 (19,24-dioctadecyldotetracontane) + POH(18,23-dioctadecylhentetracontan-1-ol) and C78 + PCN(1-cyano-18,23-dioctadecylhentetracontane) systems and positive for C78 + TTF [19,24-bis(18,18,18-trifluorooctadecyl)-1,1,1,42,42,42-hexafluorodotetracontane), and C78 + TMO(17,22-bis-(16-methoxyhexadecyl)-1,38-dimethoxyoctatriacontane] and the other systems.     

反气相色谱法与Hansen溶解度参数法测定聚乙烯醇溶解度参数及相关热力学性质

采用反气相色谱（IGC）法,以聚乙烯醇（PVA）为固定相,脂肪族、芳香族、醇、酮及卤代烃5类18种化合物为探针分子,研究PVA的溶解性质并获得了PVA在383.15～423.15 K范围内的溶解度参数（δ₂）及相关热力学性质,并与Hansen溶解度参数法（HSP）测得的溶解度参数（δ_T）进行比较。结果表明,5类溶剂对PVA溶解能力的趋势为酮类 >醇类 >卤代烃、芳香类、脂肪族类>脂环族,卤代烃、芳香类和脂肪族类溶剂的溶解能力相似;在测试温度范围内PVA的δ₂随温度升高而增加;采用IGC法外推出室温（298.15 K）下PVA的δ₂为27.69 （J/cm³）^0.5,与HSP法测得室温下PVA的δ_T（27.77 （J/cm³）^0.5）一致。PVA溶解度参数及相关热力学参数的研究为其应用及相关研究提供了定量依据。     

反气相色谱法测定有机溶剂型木质素的溶解度参数

采用反气相色谱法(IGC),于333.15～373.15 K温度范围内测定了有机溶剂型木质素的溶解度参数(δ2)及相关指标。以正辛烷(n-C8)、正癸烷(n-C10)、正十二烷(n-C12)和正十四烷(n-C14)为探针溶剂,计算了探针溶剂的特性保留体积(V0g)、摩尔吸收焓(ΔHs1)、无限稀释摩尔混合焓(ΔH∞1)、摩尔蒸发焓(ΔHv)、无限稀释活度系数(Ω∞1)以及探针溶剂与有机溶剂型木质素的Flory-Huggins相互作用参数(χ∞12)。结果表明,上述4种探针溶剂在测定的温度范围内均为有机溶剂型木质素的不良溶液;在同一温度下,参数χ∞12随着探针溶剂碳数的增加而降低。测得的有机溶剂型木质素的δ2为19.03 (J\5cm-3)1/2。     

反气相色谱法测定离子液体1-己基-3-甲基咪唑三氟甲磺酸盐的热力学参数

采用反气相色谱法研究了343.15~373.15 K温度范围内离子液体1-己基-3-甲基咪唑三氟甲磺酸盐([HMIM]OTF)的热力学参数。根据18种探针溶剂的保留时间计算出探针溶剂与[HMIM]OTF之间的摩尔吸附焓、无限稀释的摩尔混合焓、摩尔蒸发焓、质量部分活度系数、Flory-Huggins相互作用参数及[HMIM]OTF的溶解度参数。结果表明,所选溶剂中正构烷烃、四氢呋喃、乙醚、环己烷和苯为[HMIM]OTF的不良溶剂;二氯甲烷、丙酮、氯仿、乙酸乙酯、四氯化碳、乙酸甲酯、甲苯和甲醇为[HMIM]OTF的良溶剂;运用外推法得到了室温(298.15 K)时[HMIM]OTF的溶解度参数为20.74 (J/cm³)^0.5。本研究为离子液体的应用及相关工作提供了参考。