二元乙丙橡胶的环氧官能化及其增韧尼龙6的研究

在双螺杆挤出机中制备了环氧官能化的二元乙丙橡胶(gEPR) ,采用红外光谱工作曲线法测量了EPR的接枝率.将环氧官能化的EPR与尼龙6 (Nylon- 6 )熔融共混,并对共混体系的相形态、断裂形貌、增韧机理、力学性能进行了研究.结果表明,gEPR的环氧官能团与Nylon- 6的端羧基和(或)端氨基发生了化学反应生成Nylon -6 co EPR共聚物,该共聚物作为界面改性剂降低了Nylon -6与EPR之间的界面张力,使EPR在Nylon -6基体中均匀、稳定地分散,而且随着EPR接枝率的增加,EPR的粒径尺寸逐渐减小.断面形貌观察发现,与Nylon -6 EPR体系相比,Nyon -6 gEPR共混体系呈现明显的韧性断裂特征.通过对Nylon -6 gEPR共混体系缺口冲击形变区的研究得出EPR增韧Nylon -6的机理是橡胶粒子的空洞化和塑料基体的剪切屈服.力学性能测试表明gEPR的引入显著提高了Nylon -6的缺口冲击强度.     

Nanocomposites based on vapor-grown carbon nanofibers and an epoxy: Functionalization, preparation and characterization

Vapor-grown carbon nanofibers (VGCNF) were functionalized with amine-containing pendants via a Friedel-Crafts acylation reaction with 4-(3-aminophenoxy)benzoic acid. The resulting H₂N-VGCNF was treated with epichlorohydrin, followed by sodium hydroxide solution to afford N,N-diglycidyl-modified VGCNF that is designated as epoxy-VGCNF. Subsequently, epoxy-VGCNF was dispersed in an epoxy resin (Epon 862) with the aid of acetone and sonication. After acetone had been removed under vacuum from the mixture, curing agent “W” was added to epoxy-VGCNF/Epon 862 mixture, which was then poured into molds and cured at 250 °F (121 °C) for 2 h and 350 °F (177 °C) for 2 h to form a series of epoxy/fVGCNF samples; fVGCNF designated for “functionalized VGCNF” was used to denote our belief that all epoxy functions have reacted in the resulting nanocomposites. The VGCNF content was increased from 0.10 to 10.0 wt%. For comparison purposes, the pristine VGCNF or pVGCNF (0.1-5.0 wt%) was also used in the in situ polymerization of Epon 862 and curing agent “W” to afford another series of epoxy/pVGCNF samples. The epoxy-VGCNF showed a better dispersion in the epoxy resin than pVGCNF according to SEM results. Both the tensile moduli and strengths of epoxy/fVGCNF nanocomposites are higher than those of epoxy/pVGCNF. The additive effect of VGCNF on glass-transition (T_g) was discussed in terms of thermal analysis results. The thermal stability of the nanocomposites was investigated by thermogravimetric analysis (TGA).     

Fast fabrication of epoxy-functionalized magnetic polymer core-shell microspheres using glycidyl methacrylate as monomer via photo-initiated miniemulsion polymerization

Epoxy-functionalized magnetic polymer microspheres with high magnetic responsiveness were prepared through a one-step photo-initiated miniemulsion polymerization. This kind of core-shell particle can be synthesized successfully with hydrophilic monomer, glycidyl methacrylate, as a single monomer by a 10 min ultraviolet irradiation, and phase separation induced eccentric cores. The morphology of the particles was examined with a transmission electron microscope and a scanning electron microscope. The incorporation of magnetic particles was characterized with X-ray diffraction. The magnetic content of the microspheres was detected by both vibrating sample magnetometer and thermo-gravimetric analyzer.