Mechanical polishing,surface roughness,near‐surface deformation,and electrochemical corrosion of Alloy 690TT

The effects of mechanical grinding/polishing, surface roughness, and near‐surface deformation on the electrochemical corrosion behavior of thermally treated (TT) Alloy 690 were studied in a sodium chloride solution. The X‐ray photoelectron spectroscopy and transmission electron microscopy analyses revealed that mechanical grinding/polishing can change the ratio of the elements at the surface of the as‐received Alloy 690TT specimen by removing its Cr‐rich outer layer and causing deformation at the near‐surface microstructure, something which has a direct impact on the rate of the oxygen reduction reaction (ORR), the pitting potential (E_pit), and the corrosion potential (E_corr) of Alloy 690TT. It was observed that the ratio of Cr in the surface is a significant factor that controls the rate of the ORR and the corrosion parameters such as E_corr. Higher amounts of Cr at the surface accelerate the ORR. The near‐surface deformation shifts the E_pit values towards less positive potentials. It was also found that due to the different near‐surface chemical composition of the as‐received Alloy 690TT specimen compared with the ground and the polished specimens, the surface roughness parameters do not have a regular correlation with the rate of the ORR and the values of the E_corr and the E_pit. Only the passive current density increases when the surface roughness is increased. Copyright © 2015 John Wiley & Sons, Ltd.     

ESEM-EDS: In vivo characterization of the Ni hyperaccumulator Noccaea caerulescens

Environmental scanning electron microscopy (ESEM) permits to analyze samples in their native-hydrated state, allowing a broad spectrum of biological applications. In this study, ESEM equipped with energy dispersive X-ray spectrometer (EDS) was used as a fast method to analyze tissue morphology and to investigate metal distribution in the Ni hyperaccumulator Noccaea caerulescens, an established model to study the adaptation of plants to metalliferous soils. The low vacuum and wet mode operative conditions required the proper choice of experimental parameters both for morphological and compositional characterization of plant tissues. The calibration strategy for semi-quantitative analysis involved the use of Ni fortified agar as standard and signal normalization respect to endogenous carbon, chosen as internal standard. The obtained results are in accordance with present literature, showing a preferential Ni distribution in the epidermal cells respect to near the stomata for leaves and in the cotyledon epidermidis respect to cotyledon parenchyma area for seeds. Thanks to the absence of any time consuming sample treatment steps, ESEM-EDS technique can be proposed as valid strategy for in vivo high-throughput analysis of plant tissues and for a rapid screening and identification of other hyperaccumulator plants in a selected contaminated area.     

FIBSIMS: A review of secondary ion mass spectrometry for analytical dual beam focussed ion beam instruments

Secondary ion mass spectrometry (SIMS) is a well-known technique for 3D chemical mapping at the nanoscale, with detection sensitivity in the range of ppm or even ppb. Energy dispersive X-ray spectroscopy (EDS) is the standard chemical analysis and imaging technique in modern scanning electron microscopes (SEM), and related dual-beam focussed ion beam (FIBSEM) instruments. Contrary to the use of an electron beam, in the past the ion beam in FIBSEMs has predominantly been used for local milling or deposition of material. Here, we review the emerging FIBSIMS technique which exploits the focused ion beam as an analytical probe, providing the capability to perform secondary ion mass spectrometry measurements on FIBSEM instruments: secondary ions, sputtered by the FIB, are collected and selected according to their mass by a mass spectrometer. In this way a complete 3D chemical analysis with high lateral resolution <?50 nm and a depth resolution <?10 nm is attainable.We first report on the historical developments of both SIMS and FIB techniques and review recent developments in both instruments. We then review the physics of interaction for incident particles using Monte Carlo simulations. Next, the components of modern FIBSIMS instruments, from the primary ion generation in the liquid metal source in the FIB column, the focussing optics, the sputtered ion extraction optics, to the different mass spectrometer types are all detailed. The advantages and disadvantages of parallel and serial mass selection in terms of data acquisition and interpretation are highlighted, while the effects of pressure in the FIBSEM, acceleration voltage, ion take-off angles and charge compensation techniques on the analysis results are then discussed. The capabilities of FIBSIMS in terms of sensitivity, lateral and depth resolution and mass resolution are reviewed. Different data acquisition strategies related to dwell time, binning and beam control strategies as well as roughness and edge effects are discussed. Data analysis routines for mass identification based on isotope ratios and molecular fragments are outlined. Application examples are then presented for the fields of thin films, polycrystalline metals, batteries, cultural heritage materials, isotope labelling, and geological materials. Finally, FIBSIMS is compared to EDS, and the potential of the technique for correlative microscopy with other FIBSEM based imaging techniques is discussed.     

Analysis of polished polycrystalline diamond using dual beam focused ion beam microscopy

This paper presents a study on polycrystalline diamond (PCD) polished by dynamic friction polishing (DFP) with the aid of advanced dual beam FIB (focused ion beam) microscopy. After disclosing a variety of wear tracks by DFP using electron imaging in combination with the ion channelling effect, a dual beam FIB was successfully employed at wear track sites to specifically create both the large cross-sectional specimen for microanalysis and thin foil for nanoanalysis. The study concluded that the polished PCD subsurface was free from microscale cracking. However, the attached debris layer on the top surface contained metal oxides and non-diamond carbon phase with inhomogeneous distributions of C, Fe, Cr, Ni, Si and O across the layer. An attached layer directly above a diamond grain was composed of essentially amorphous carbon, suggesting that a direct phase transformation from diamond crystalline to amorphous occurred during DFP.     

The secondary X-ray fluorescence and absorption near the interface of multi-material: Case of EDS microanalysis

A simple model is proposed to take into account secondary X-ray fluorescence and absorption effects near the interface. This model is based on the investigation of the shape change of the first derivative equation that can fit the sigmoidal EDS profile obtained when a high vacuum electron beam passes through the interface of two adjacent materials. The contribution of the photoelectric absorption of primary X-rays (characteristic and Bremsstrahlung) and the secondary fluorescence on the degradation of the X-ray spatial resolution can be easily quantified. The close agreement between the simulated (Monte Carlo simulation using the Casino software) and the experimental data serves to assess the reliability of this developed model.     

给定割点数的简单连通图的最小EDS极图

图的EDS(偏心距离和)是图的一个类似于Wiener指数的另一个重要指数,近年来受到广泛的关注.2012年H.B.Hua等在Discrete Appl.Math.中的一篇关于图的EDS极图的论文中提出一个问题:哪些图是具有k个割点及最大或最小EDS的极图?通过研究图的EDS确定了给定割点数为k的简单连通图的最小EDS极图.     

Influence of the Oxide Content in the Catalytic Power of Raney Nickel in Hydrogen Generation

The influence of oxides in the hydrogen evolution on Raney nickel electrocatalysts was characterized by electrochemical impedance measurements. In addition, these materials show competitive overpotentials for hydrogen evolution with a modified Watts bath as a binder for the Raney nickel. The optimum result was ?190?mV of overpotential at 100?mA?cm^?2. Oxygen in the Raney Ni catalyst affects its electroactivity toward hydrogen evolution. The source of oxygen is related to the presence of chloride ions in the modified Watts bath. A Watts bath binds Raney Ni particles to the surface of the catalysts and chloride regulates the oxygen content in the nickel binder during electrodeposition. High oxygen content increases the hydrogen evolution overpotential of the electrode. The electroactivity of the synthesized porous coatings was evaluated by polarization curves and impedance plots. In addition, surface characterization by X-ray diffraction, field emission–scanning electron microscopy equipped with energy-dispersive analysis, and X-ray photoelectron spectroscopy is reported.     

单元和多元取代纳米氢氧化镍晶相及其结构稳定性研究

以硝酸镍为镍源,硫酸钴、硫酸铜、硫酸铝为掺杂原料,采用超声波辅助沉淀法分别制备了单元和多元取代纳米氢氧化镍。用X射线衍射（XRD）、傅里叶变换红外光谱（FTIR）、激光粒度仪（PSD）及电子显微镜（TEM、SEM）对样品晶相结构、形貌、粒度分布等进行了表征,研究了单元或多元取代对产物晶相及其结构稳定性的影响。结果表明,样品均为纳米级Ni（OH）₂,随着掺杂元素种类的增多,其一次粒子变得细小,团聚加重,二次粒子粒径增大。样品中α-Ni（OH）₂比例随取代元素增多而增大。相对于Co单元和Co/Cu双元取代,Co/Cu/Al三元取代的样品其晶相结构更稳定,在碱液中浸泡3周后仍为纯α-Ni（OH）₂。在相同掺杂比例下,Cu取代比Co取代更有利于α-Ni（OH）₂的生成,但Co取代的样品结构稳定性优于Cu取代的样品。     

Levels of mineral nutrients in fresh- and frozen bulk hydrated biological specimens: A comparison of EDS data collected in the environmental SEM and a conventional cryo-SEM

Energy-dispersive X-ray microanalysis (EDS) was compared in fresh- and frozen bulk hydrated tissues using the Environmental SEM (ESEM) and conventional cryo-SEM, respectively. Analyses of globoid inclusions of Eucalyptus calophylla seed from two soil types demontsrated that higher levels of cations (K, Ca, Mg, Al, Fe, Mn, Cu, Zn) occurred in seeds from soils containing higher levels of Al, while EDS-detectable levels of S and P were dependent upon the techniques utilised. Cumulative changes in ESEM-EDS-detectable levels of S and P were characterised by collecting cumulative spectra from nutrient standards and compared with those for K. Progressive increases in K occurred and were consistent with an enriching effect. Levels of S and P increased during early analysis (40–60 sec live time) and decreased thereafter. The semi-conductive nature of biological samples, the loss of anions and gain of cations from the net negatively-charged electron interaction volume contributed to an electrochemical bias. These local modifications in fluid chemistry were reversible. Dehydration effects also occurred in stable, “wet‘ samples. These differences indicated that EDS in ESEM may be limited to cations rather than anions, and that changes in fluid electrochemistry and dehydration may affect the level and distribution of elements.     

EDS X-Ray Investigation of Interdiffusion in Au–Ni Micro- and Nanolayers

The interdiffusion process in thin and thick (500nm–60µm) Au–Ni layers deposited on different substrates is studied using the EDS technique. In-depth X-ray analysis based on the Pouchou and Pichoir method is applied for obtaining the concentration profiles in nanometre scale multi-layers. A theoretical analysis using the Darken method is employed for modelling interdiffusion in the Au–Ni system. Computer simulations, where intrinsic diffusivities of the Au and Ni are functions of composition, are presented and compared with experimental results.