Precision Graphene Nanoribbon Heterojunctions by Chain-Growth Polymerization

Graphene nanoribbons (GNRs) are considered promising candidates for next-generation nanoelectronics. In particular, GNR heterojunctions have received considerable attention due to their exotic topological electronic phases at the heterointerface. However, strategies for their precision synthesis remain at a nascent stage. Here, we report a novel chain-growth polymerization strategy that allows for constructing GNR heterojunction with N=9 armchair and chevron GNRs segments ( 9-AGNR/cGNR ). The synthesis involves a controlled Suzuki–Miyaura catalyst-transfer polymerization (SCTP) between 2-(6′-bromo-4,4′′-ditetradecyl-[1,1′:2′,1′′-terphenyl]-3′-yl) boronic ester ( M1 ) and 2-(7-bromo-9,12-diphenyl-10,11-bis(4-tetradecylphenyl)-triphenylene-2-yl) boronic ester ( M2 ), followed by the Scholl reaction of the obtained block copolymer ( poly-M1/M2 ) with controlled M_n (18 kDa) and narrow Đ (1.45). NMR and SEC analysis of poly-M1/M2 confirm the successful block copolymerization. The solution-mediated cyclodehydrogenation of poly-M1/M2 toward 9-AGNR/cGNR is unambiguously validated by FT-IR, Raman, and UV/Vis spectroscopies. Moreover, we also demonstrate the on-surface formation of pristine 9-AGNR/cGNR from the unsubstituted copolymer precursor, which is unambiguously characterized by scanning tunneling microscopy (STM).     

Multiblock Copolymers Based on Highly Crystalline Polyethylene and Soft Poly(ethylene-co-butadiene) Segments: Towards Polyolefin Thermoplastic Elastomers

Block copolymers based on polyethylene (PE) and ethylene butadiene rubber (EBR) were obtained by successive controlled coordinative chain transfer polymerization (CCTP) of a mixture of ethylene and butadiene (80/20) and pure ethylene. EBR-b-PE diblock copolymers were synthesized using the {Me₂Si(C₁₃H₈)₂Nd(BH₄)₂Li(THF)}₂ complex in combination with n-butyl,n-octyl magnesium (BOMAG) used as both the alkylating and chain transfer agent (CTA). Triblock and multiblock copolymers featuring highly semi-crystalline PE hard segments and soft EBR segments were further obtained by the development of a bimetallic CTA, the pentanediyl-1,5-di(magnesium bromide) (PDMB). These new block copolymers undergo crystallization-driven organization into lamellar structures and exhibit a variety of mechanical properties, including excellent extensibility and elastic recovery in the case of triblock and multiblock copolymers.     

A Conjugated Copolymer Bearing Imidazolium-based Ionic Liquid:Electrochemical Synthesis and Electrochromic Properties

An imidazolium-based ionic liquid(IL) modified triphenylamine derivative,namely 1-(4-((4-(diphenylamino)benzoyl) oxy)butyl)-3-methyl imidazole tetrafluoroborate(TPAC_6 IL-BF_4),was designed and synthesized,and further applied with 3,4-ethylene dioxythiophene(EDOT)to prepare conjugated copolymer P(EDOT:TPAC_6 IL-BF_4) via electrochemical polymerization.The cyclic voltammetry curves show that the copolymer P(EDOT:TPAC_6 IL-BF_4) possesses two pairs of redox peaks,which should be ascribed to the redox behaviors of EDOT and triphenylamine.The ultraviolet-visible(UV-Vis) absorption spectrum of P(EDOT:TPAC_6 IL-BF_4) exhibits one maximum absorption peak at 580 nm and a small shoulder characteristic peak at 385 nm under neutral state which are assigned to π-π~* conjugated structure of EDOT and triphenylamine.After being applied at the positive voltage,the copolymer color changes from dark blue to light blue,which is close to the color of poly(3,4-ethylenedioxythiophene)(PEDOT).Surprisingly,the copolymer P(EDOT:TPAC_6 IL-BF_4) shows shorter switching time of 0.37 s,0.30 s at 580 nm and 0.38 s,0.45 s at 1100 nm compared with PEDOT.It is more intriguing that the copolymer P(EDOT:TPAC_6 IL-BF_4) exhibits electrochromism even in free supporting electrolyte.The results confirm that the existence of imidazolium-based ionic liquid has an improvement on the ion diffusion properties and the switching time of conjugated polymer,which may provide a potential direction for the preparation of high-performance electrochromic materials.     

Development of highly ionic conductive cellulose acetate-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co-methyl methacrylate) graft copolymer membranes

A novel cellulose acetate-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co- methyl methacrylate) copolymer was prepared via free radical polymerization for the first time. The chemical structure of the graft copolymer was confirmed using FT-IR, ¹H NMR and EDX. The TGA and DSC investigated the thermal changes. Factors affecting the grafting process were studied and various grafting characteristic parameters such as grafting efficiency (%), grafting yield (%) and add-on value (%) were determined. Flexible membranes based on different graft copolymer compositions were fabricated by simple solution casting. Physicochemical properties including ion exchange capability (IEC), water uptake (WU) and proton conductivity (σ) were evaluated. These membranes demonstrated higher IEC, WU and conductivity than the pristine CA. The maximum proton conductivity of the CA-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co- methyl methacrylate) copolymer membrane (68%; Add-on %) was found to be 6.44 × 10⁻³ S/cm compared with 0.035 × 10⁻³ S/cm of the pristine CA. Thus, the appropriate graft copolymer composition will allow fine-tuning of the physical characteristics and led to several potential applications, such as polyelectrolyte fuel cells membranes or biodiesel production.     

Synthesis of novel copolymer：Poly(p-dioxanone-co-L-phenylalanine)

In order to expand the application of poly(p-dioxanone) or PPDO in biomedical area,a series of novel copolymers were synthesized successfully by one-step,melted copolymerization of p-dioxanone(PDO) and L-phenylalanine N-carboxyanhydride(L-Phe-NCA) monomers.With the in-feed molar ratio of L-PheNCA /PDO equal to 1/20,the conversions of the two kinds of monomers were calculated from ~1H NMR. The average molecular weight and polydispersity of the copolymer increase with the increasing reaction time and catalyst concentration.However,the conversions of the two kinds of monomers did not change with the reaction conditions.A three-step mechanism is presented and proved by high resolution ~1H NMR and IR spectrums.     

Measurement of the Rates of Diffusion of Halomethanes into Polymer Films Using ATR-FTIR Spectroscopy

Polymer-modified attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy and FEWS (fibre-optic evanescent wave) spectroscopy have been very successful to date for sensitive detection of organic pollutants in water utilising the mid-infrared (MIR) region of the electromagnetic spectrum (4000-400 cm^?1). This sensing approach involves the use of different polymer films for preconcentration with optimisation of the sensor related to the rate of diffusion of solvent molecules into these polymer films. Compounds such as chloroform, bromoform, bromodichloromethane and dibromochloromethane which are collectively referred to as trihalomethanes (THMs) were analysed in this work. A gaseous phase experimental design was used and from experimental data the rate of diffusion of each of the halomethanes was quantified based on a Fickian type diffusion model. Individual diffusion coefficient values were found to be in the range 3.38 E-10 ± 0.01 E-10 to 4.72 E-08 ± 0.42 E-08 cm² s^?1. Multicomponent effects were observed for mixtures of compounds diffusing into polyisobutylene and ethylene-propylene copolymer.     

Synthesis and Application of Epoxidized Natural Rubber

Abstract

North Vietnamese NR latexes were successfully epoxidized using peracetic acid at moderate temperature and pH range. The epoxide contents of pure epoxidized natural rubber (ENR) are from 5 to 70 mol%. The ENR products were characterized and determined by spectral and thermal analysis besides the chemical titration. Conditions of longlasting or excessive temperature, or high acidic pH led to side ring opened products, proved easily by IR, ¹H-NMR, and DSC analysis. The ENR were vulcanized using a semiefficient system. The epoxidation increased the adhesion between rubber and tire cord and metal. This effect becomes stronger beyond 25 mol% and tends to be limited at over 60 mol%. The ENRs were used to formulate special-purpose adhesives. The shear strength of the adhesive ranges from 32 to 45 kg/cm² for bonding rubber to nylon and rubber to metal, respectively.     

Improved Compatibility of Styrene-Maleic Anhydride Copolymer/Polyethylene Blends Through Reactive Mixing

Abstract

To improve the compatibility of styrene-maleic anhydride copolymer/low density polyethylene (SMA/LDPE) blends, LDPE grafted with 2-hydroxyethyl methacrylate-isophorone diisocyanate (LDPE-g-HI) was prepared and blended with SMA of which anhydride was converted to carboxylic acid (SMAAc). The infrared spectra of LDPE-g-HI established the presence of isocyanate group. In the blend morphology, some adhesions between the two phases and much finer dispersions were observed in the SMAAc/LDPE-g-HI blends, indicating that chemical reactions took place during the melt blending. The lower heat capacity change at the glass transition temperature demonstrated that chemical bonds were produced in the SMAAc/LDPE-g-HI blends. From the results of the rheological test, it was found that strong positive deviation from the mixing rule occurred in viscosity for the SMAAc/LDPE-g-HI blends, concerning with good adhesion and finer dispersions. In the measurement of tensile property, the improved mechanical properties for the SMAAc/LDPE-g-HI blends were shown.     

Uv Dye Lasers

The moat important property of visible dye lasere, that is continuous wave length tuning, stimulated the search for dyes capable to lase UV. And they were founed in 1668¹. Now the need In tunable UV laeers for applications in spectroacopy, photochemistry, isotope separation, remote air and sea probing, etc. ie only more clearly Been. The object of thie paper is to review shortly some recent advances In UV dye lasers.     

一种新型多元共聚含氟丙烯酸树脂的制备及性能研究

以含氟丙烯酸酯与几种不同结构丙烯酸酯单体为原料,采用常规的自由基引发溶液聚合反应,制备了一种新型疏水低表面能丙烯酸树脂。并以水接触角和铅笔硬度两项指标考察其应用性能。经固化成膜后,聚合物膜与水的接触角达到118.5°,铅笔硬度达到F等级以上。系统研究了涂膜与水接触角和铅笔硬度的主要影响因素,可通过调节单体投料比来调控接触角和铅笔硬度来适应不同实际应用领域的技术指标需求。这种具有力学强度的疏水涂层具有很大的应用价值。