沙尘天气对AAS、ICP-AES测定的影响

以大型仪器原子吸收光谱仪、电感耦合等离子体发射光谱仪为例,说明当沙尘天气发生时,空气中的粉尘和微小颗粒进入到仪器内部会引起空气压缩机故障、射频发生器的传感器不工作、助燃气堵塞等一系列问题;并针对这些问题进行处理,给以后仪器的使用和保养提供相应的参考。     

Rapid Synergistic Extraction And Atomic Absorption Spectrometric Determination Of Iron In Environmental Samples Using Tributyl Phosphate And N-Phenyl-2-Furylacrylohydoroxamic Acid

Abstract

Iron (III) was rapidly extracted as its ternary complex with tributyl phosphate and N-phenly1-2-furylacrylohydroxamic acid (PFHA) from weakly acidic (pH 1.0-1.5) solutions into isobutyl methyl ketone and was determined atomic absorption spectrometrically. The method tolerated the presences of a large number of anions and cations commonly associated with iron, and was successfully tested with certified samples of coal fly ash, alloys, and plant tissues. It was also applied to the analysis of animal tissues, natural waters, and wastewaters; validating it by standard addition technique. PFHA was selected from nine new hydroxamic acids.     

A Review of Instrumental Approaches for Studying Historical Inks

In the last 10 years researchers have adapted a number of instrumental techniques for studying various aspects of historical inks that have been used in historical documents. In this paper, the applications of atomic spectroscopy such as GFAAS, ICP-MS, XRF, PIXE, and XANES are described for identifying and quantifying metals that are found in historical inks. Applications of vibrational spectroscopy, primarily Raman and near/mid-IR spectroscopy, are described for detecting organic and inorganic compounds in ink and paper.     

Iron Interference in the Measurement of Selenium in Whole Blood,Plasma and Serum by Graphite Furnace Atomic Absorption

Abstract

Selenium is considered to be a trace element and the determination of diagnostic levels are most conveniently measured in blood, plasma or serum in humans and animals. The approach that is taken varies according to laboratory preferences. One such method involves the use of Graphite furance Atomic Absorption Spectroscopy (GFAAS). The simplicity of diluting the sample followed by direct determination without further preparation is the most attractive characteristic of this method, coupled with good sensitivity. Proper precautions must be taken however, including that of choosing the proper instrumental parameters for the analysis. If deuterium background correctiopn is used then then analyses should be carried out at the 204.0 nm line of Selenium. By using a matrix modifier consisting of Cu/Mg, deuterium background correction and off the wall of the graphite tube atomization, the determination of the analyte was demonstrated to be possible at the mentioned wavelength, free from iron interference present in the samples.     

原子吸收光谱法测定重金属铬的含量

以火焰原子吸收光谱法测定重金属铬含量为宗旨,考察了雾化器流量、乙炔流量、氧化剂流量、燃烧头高度、基本改进剂等因素,结果发现,通过实验条件优化,校正系数从0.998265提高到0.999998,该方法能最大程度改善火焰原子吸收光谱法测定铬元素灵敏度低的问题,具有快速、准确、灵敏度高等优点,为与人类密切相关的食品、药品、化妆品、医疗器械等产品中重金属铬含量测定提供一定的参考。     

原子吸收光谱法测定磷酸酯化梨渣吸附的Cr（Ⅵ）离子

通过原子吸收光谱法研究了在不同pH值、吸附剂量、吸附质浓度和吸附时间条件下磷酸酯化改性梨渣吸附Cr（Ⅵ）离子的效果。溶液初始pH 4.5时,Cr（Ⅵ）离子的吸附达到最大值;酯化梨渣≥10g.L-1能除去Cr（Ⅵ）为100μg.L-1溶液中的86.5%的Cr（Ⅵ）离子。酯化梨渣对Cr（Ⅵ）离子的吸附符合Langmuir等温模型,其最大吸附能力为67.56μg.g-1。Cr（Ⅵ）离子达到吸附平衡的时间为90min,准一级反应动力学方程可描述酯化梨渣对Cr（Ⅵ）离子的吸附过程。     

Direct determination of Hg in polymers by solid sampling-graphite furnace atomic absorption spectrometry : A comparison of the performance of line source and continuum source instrumentation

This work explores the potential of solid sampling-graphite furnace atomic absorption spectrometry (SS-GFAAS) for the fast and direct determination of Hg in polymers. Eight certified reference materials with different composition (polyethylene-PE-, polystyrene-PS-, poly vinyl chloride-PVC- and acrylonitrile butadiene styrene-ABS-) were selected for the study, covering a wide Hg content range (from 20 to 1100 μg g^− 1).     

流动注射在线过滤稀释原子吸收法测定诺氟沙星

提出了流动注射在线过滤稀释原子吸收法测定诺氟沙星的新方法。药物浓度在0．1－0．8mg/mL范围符合比耳定律，回收率为97．9％－102．4％，相对标准偏差为1．7％。方法可用于诺氟沙星胶囊测定。     

Determination of selenomethionine by high performance liquid chromatography-direct hydride generation-atomic absorption spectrometry

A simple, reliable, trace determination of selenomethionine (Semet) based on a direct hydride generation atomic absorption spectrometric method was developed using sodium tetrahydroborate (0.3% in 0.2% NaOH) and hydrochloric acid (3 M). The method excluded any chemical pretreatment prior to hydride generation (HG). The optimized HG system was successfully coupled with the HPLC system. The detection limit (3σ of blank; n=5), reproducibility (R.S.D. of three successive analyses/day, performed on three different days), and repeatability (R.S.D. of three successive analyses) of the method were 1.08 ng ml⁻¹, 9.8% for 9.04 ng ml⁻¹ and 2.1–9.5% for 30.0–1.27 ng ml⁻¹ Semet as Se (standards prepared in Milli-Q water). Calibration graph was linear up to 30 ng ml⁻¹. This HPLC-HG-AAS method is very promising and successfully determined Semet (spiked) in human urine.     

Determination of potentially toxic heavy metals in traditionally used medicinal plants for HIV/AIDS opportunistic infections in Ngamiland District in Northern Botswana

The determination of four potentially toxic heavy metals, arsenic, chromium, lead and nickel in twelve plant species used for the treatment of perceived HIV and AIDS-associated opportunistic infections by traditional healers in Ngamiland District in Northern Botswana, a metal mining area, was carried out using atomic absorption spectrometry. The medicinal plants; Dichrostachys cinerea, Maerua angolensis, Mimusops zeyheri, Albizia anthelmintica, Plumbago zeylanica, Combretum imberbe, Indigofera flavicans, Clerodendrum ternatum, Solanum panduriforme, Capparis tomentosa, Terminalia sericea and Maytenus senegalensis contained heavy metals in varying quantities: arsenic 0.19–0.54 μg g⁻¹, chromium 0.15–1.27 μg g⁻¹, lead 0.12–0.23 μg g⁻¹ and nickel 0.09–0.21 μg g⁻¹ of dry weight. Chromium was found to be the most abundant followed by arsenic and lead. Nickel was undetectable in nine plant species. M. senegalensis contained the largest amounts of arsenic, chromium and lead. All metals determined were below the WHO permissive maximum levels. The possible maximum weekly intakes of the heavy metals following treatment regimes were insignificant compared to the provisional tolerable weekly intake levels recommended by WHO and the Joint FAO/WHO Expert Committee on Food Additives. This suggests that heavy metal exposure to patients originating from consumption of traditional medicinal plant preparations is within non health-compromising limits.