超轻多孔金属的进展与物理学

简述了超轻多孔金属的结构、性能,研究从材料范畴发展为物理学范畴.发展的新趋势为,将国家高技术目标需求与科学前沿相结合,将认识与实践相结合.     

金属β-二酮化合物用于MOCVD法生长铁电氧化物薄膜

对用于MOCVD法生长铁电氧化物薄膜的金属β－二酮化合物的制备、结构及性质进行了评述，对它们在生长铁电薄膜中的应用现状进行了介绍，并对它们的应用前景作了展望。     

蓝宝石R面上ZnO薄膜的NH3掺杂研究

以NH₃为掺杂源,利用金属有机化学气相沉积(MOCVD)系统在蓝宝石R面上生长出掺氮ZnO薄膜。通过XRD,SEM测量优化了其生长参数,在610℃和在80sccm的NH₃流量下生长出了〈1120〉单一取向的ZnO薄膜。经Hall电阻率测量,得知该薄膜呈现弱p型或高电阻率,并对其光电子能谱进行了研究。     

记录媒体用薄膜材料及相关靶材的技术和发展

 信息化时代随着计算机技术的普及来到我们面前,其突出表现是信息总量和信息交换的剧增,因此,发展海量存储技术日趋重要。随着信息及计算机技术的不断发展,对其作为主要工具的记录媒体的需求越来越大,要求越来越高。记录媒体中大多数磁盘、磁光盘、光盘是以相关靶材磁控溅射而成的,因此,为满足信息记录媒体的高密度化、小型化和低价格化,需要对其相关靶材的成分、制造工艺、性能和溅射工艺做进一步研究。目前,随着新材料的开发和记录媒体的发展,磁光盘、光盘用靶材市场在不断增长。尤其近几年CD、VCD、DVD市场的迅速扩大,其相关靶材的前景也日益被看好。     

Viscosity Characteristic in Metallic Melts with Medium／Short-Range Order Structures

Viscosities and liquid structure of alloys Cu75Al25, Cu87Sn13 and Al-12.5%Si and pure metals Cu and Sn are investigated by using torsional oscillation viscometry and high temperature x-ray diffractometry. The viscosities of pure metals and eutectic alloy melts along with the short-range order structure are found to follow the Arrhenius law in a wide range of temperature above the liquidus. The breakpoints in Arrhenius plots emerge when the structures of alloy melts are transformed from the medium-range order structure to the short-range order structure. It has been found that the change of the viscosity of the metallic alloys is a characteristic of microstructure transformation in the related melts.     

漫谈金属探测器

提起金属探测器（Metal Detector），人们就会联想到探雷器，工兵用它来探测掩埋的地雷．金属探测器是一种专门用来探测金属的仪器，除了用于探测有金属外壳或金属部件的地雷之外，还可以用来探测隐蔽在墙壁内的电线、埋在地下的水管和电缆，甚至能够地下探宝，发现埋藏在地下的金属物体．目前还广泛应用于各种大型会议中心、会展场馆、体育场馆、公检法、监狱系统及娱乐场所的安全检查和工厂企业的防偷窃检查，甚至用于对高考禁带物品的检查．本文就来谈谈金属探测器的发展历史和工作原弹．     

养殖池塘沉积物的重金属分布及污染特征

浙江省淅西北地区淡水养殖池塘沉积物重金属调查研究表明，养殖池塘沉积物中7种重金属元素分布不均衡，差异也较大，除Hg和Cr元素外，其余重金属元素已大大超过土壤本底值．虽然其实测含量都未超出国家规定的标准值范围，但沉积物中重金属元素对养殖水环境、养殖品种存在的潜在污染与危害值得关注．污染指数评价显示，养殖池塘沉积物中主要污染物质为Cu和Cr，而Hg、Pb污染程度相对较轻．     

短脉冲激光辐照下金属镜面波纹损伤机理研究

用脉冲Nd：YAG激光(波长1．06μm、半高宽10ns)辐照了多种金属膜层镜面，用光学与原子力显微镜观察到某些样品损伤区或周围有规律的波纹图案，波纹周期从几微米到几十微米。通过分析实验结果，这里提出了波纹产生的光学模型，认为光路系统中某些元件的衍射或者强光与元件表面相互作用过程中产生的干涉可能会导致元件表面波纹状损伤图案。通过理论计算，初步解释了实验中波纹的周期和其他现象。     

Transmission Properties of THz Radiation Pulses through Very Deep Zero-Order Metallic Gratings

Very deep zero-order metallic grating structures are processed to study the transmission properties of THz radiation pulses. The experiments have been performed with two samples. The delay of the THz pulses and the corresponding resonantly enhanced transmission spectra through the samples are observed. To explain the extraordinary transmission we have treated the samples as Fabry-Perot resonators through resonant excitation of the coupled surface plasmon polaritons filled in the cavities between the metal slats. The experimental results are in reasonable agreement with the numerical simulation. Our results show that THz-time-domain spectroscopy may be an effective technique for studying the optical properties of various THz microstructured devices.     

Deformation Morphology underneath the Vickers Indent in Bulk Metallic Glasses

Plastic deformation behaviour of Zr52.5Al10Ni10Cu15Be12.5 and Mg65Cu25Gd10 bulk metallic glasses (BMGs) is studied by using the depth-sensing nanoindentation and microindentation. The subsurface plastic deformation zone of the BMGs is investigated using the bonded interface technique. Both the BMGs exhibit the serrated flow depending on the loading rate in the loading process of indentation. Slow indentation rates promote more conspicuous serrations, and rapid indentations suppress the serrated flow. Mg-based BMG shows a much higher critical loading rate for the disappearance of the serration than that in Zr-based BMG. The significant difference in the shear band pattern in the subsurface plastic deformation zone is responsible for the different deformation behaviour between the two BMGs. Increase of the loading rate can lead to the increase of the density of shear bands. However, there is no distinct change in the character of shear bands at the loading rate of as high as1000 nm/s.