非线性玻尔兹曼方程的傅里叶谱方法

玻尔兹曼方程作为空气动理学中最基本的方程之一,是连接微观牛顿力学和宏观连续介质力学的重要桥梁.该方程描述了一个由大量粒子组成的复杂系统的非平衡态时间演化:除了基本的输运项,其最重要的特性是粒子间的相互碰撞由一个高维,非局部且非线性的积分算子来描述,从而给玻尔兹曼方程的数值求解带来非常大的挑战.在过去的二十年间,基于傅里叶级数的谱方法成为了数值求解玻尔兹曼方程的一种很受欢迎且有效的确定性算法.这主要归功于谱方法的高精度及它可以被快速傅里叶变换加速的特质.本文将回顾玻尔兹曼方程的傅里叶谱方法,具体包括方法的导出,稳定性和收敛性分析,快速算法,以及在一大类基于碰撞的空气动理学方程中的推广.     

四苯乙烯及其衍生物超声辅助合成与光电性能研究

四苯乙烯及其衍生物被广泛报道具有典型的聚集诱导发光(AIE)性能，在有机发光二极管、荧光离子探针、生物化学成像等诸多领域有着广阔的应用前景。以此为背景，可以将相关前沿议题转化为本科综合实验教学方案。本文针对现有的实验教学方案设计进行了探究和改进，在原有使用McMurry偶联反应制备四苯乙烯的实验方案基础上，利用生色团上不同取代基的推拉电子效应设计平行对照试验，合成溴代、甲氧基取代的四苯乙烯衍生物，实现了荧光发射光谱最大峰波长的显著移动，使得在紫外灯下即可观察到荧光从蓝色到黄绿色的变化。利用超声辅助合成的方法，成功将反应时间从原有的6–8 h压缩至2 h，使之更适应本科教学实验所需的时间空间。除光学性能表征外，本实验还综合了循环伏安法表征产物的能带结构。本实验针对原有方案进行了诸多改进，引入平行实验锻炼科学思维、别出心裁地引入超声辅助合成法，极大地缩短了反应时间，展现出较强的前沿性、绿色性和高效性。     

多孔氮化硼掺杂聚吡咯-2,3,3-三甲基吲哚固相微萃取涂层的制备及多环芳烃的检测

多环芳烃(PAHs)是持久性有机污染物中的一种，大部分具有较强的致癌、致畸和致突变性，对生态环境和人类健康易造成严重威胁。由于环境样品基质复杂且其中PAHs含量低，因此在仪器分析之前需要对环境样品进行必要的前处理。萃取材料的特性是决定大部分前处理技术萃取效率的关键。基于此，本文以低成本且富含较多官能团的吡咯(py)、2,3,3-三甲基吲哚(2,3,3-TMe@In)为单体，多孔氮化硼为掺杂物，采用电化学循环伏安法制备出多孔氮化硼掺杂聚吡咯-2,3,3-三甲基吲哚(Ppy/P2,3,3-TMe@In/BN)复合涂层，通过扫描电子显微镜、热稳定性分析、傅里叶红外光谱等手段对Ppy/P2,3,3-TMe@In/BN进行表征，结果表明：该涂层呈现出多孔、多褶皱的枝状结构，该结构有利于增加涂层的比表面积，从而实现对PAHs的大量富集；在320℃解吸温度下，涂层材料的色谱基线基本稳定，表明该涂层具有良好的热稳定性。将其修饰在不锈钢丝表面制成固相微萃取涂层，结合气相色谱-氢火焰离子化检测器，对影响萃取和分离萘(NAP)、苊(ANY)、芴(FLU)3种PAHs的条件进行优化，建立了用于以上3种PAHs...     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

四方体MgO的制备及对有机染料的吸附

以六水氯化镁和六次甲基四胺为原料,采用水热法合成四方体MgO,考察其对有机染料甲基橙和亚甲基蓝的吸附行为.通过TGA-DTA、SEM、XRD、N2-sorption和FT-IR等手段表征样品.结果表明,原料浓度、温度和表面活性剂对四方体MgO结构的形成影响较小,而反应时间的延长有助于有序结构的组装.温度170℃、时间24h、MgCl2·6H2O与C6H12N4浓度比为1∶2和表面活性剂PVP是制备四方体MgO的最佳条件.在溶液浓度10mg · L-1的单一吸附实验过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为91.3;和22.3;,吸附过程均为单层吸附且符合Langmuir等温吸附模型和伪二级吸附动力学方程.在溶液浓度40 mg·L-1、甲基橙和亚甲基蓝浓度比3∶1的混合溶液吸附过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为80.1;和97.9;.     

含分布时滞的时滞微分系统多步龙格-库塔方法的时滞相关稳定性

本文研究了一类含分布时滞的时滞微分系统的多步龙格-库塔方法的稳定性.基于辐角原理，本文给出了多步龙格-库塔方法弱时滞相关稳定性的充分条件，并通过数值算例验证了理论结果的有效性.     

DSA、CTA联合MR影像评估AIS患者脑支循环及预后性关系

探讨数字减影血管成像(DSA)、计算机断层扫描血管成像(CTA)联合磁共振(MR)影像评估急性缺血性卒中(AIS)患者脑支循环及预后性关系。选取60例大脑中动脉M1段急性闭塞所致AIS患者为研究对象,根据DSA、CTA与MR影像对其脑侧支循环评估,比较患者基线资料、结局指标等,并分析预后性。结果发现:基于DSA、CTA与MR影像对AIS患者脑侧支循环评估结果一致性良好;3种影像模式下脑侧支循环良好组与不良组结局资料差异显著(P<0.05);多因素分析显示,FVH-ASPECTS评分、rLMC评分、ASITN/SIR分级量表均为AIS患者神经功能预后的独立影响因素。总之,DSA、CTA、MR影像对AIS患者脑侧支循环评估具有一致性,且FVH-ASPECTS评分、rLMC评分、ASITN/SIR分级量表均为AIS患者神经功能预后的独立影响因素。