断陷盆地层滑带的发育特征及矿山开发条件下的再变形分析

层滑带在华北断陷盆地中具有普遍性,是影响地下矿山工程围岩稳定的重要因素之一。本文以鲁西矿区为例,阐述了断陷盆地层滑带的发育特征及其形成机制,进行了开挖、运营条件下层滑带再变形分析,并指出了层滑带发育区巷道设计及维护中应注意的某些问题。     

Current-temperature measurements of a SBD evaporated onto inductively coupled plasma cleaned germanium

Inductively coupled plasma (ICP) etching has been used primarily on compound semiconductors. There are however compelling reasons to study the effects of ICP etching on Ge. Pd Schottky barrier diodes (SBDs) were resistively evaporated onto Ge (1 1 1) that was ICP etched at a rate of 60 Å per minute for three or ten minute intervals. Although plasma cleaning is known to introduce defects that were observed with DLTS, the diodes exhibited excellent current-voltage characteristics when cooled down to 80 K. Current-temperature (IT) scans that were recorded from 20 K up to 300 K after cooling under reverse bias showed no effect of recombination/generation (RG). On the other hand, IT scans that were recorded after cooling under zero or forward bias clearly exhibited RG effects in the 100-240 K temperature range. This effect was found to be completely reversible. In addition, ICP etching leads to superior devices when compared to devices manufactured by RF sputter deposition.     

Source/drain engineering for MOSFETs with embedded-Si:C technology

Embedded silicon carbon alloy (e-Si:C) technology for source and drain (S/D) is expected to improve nMOSFET drive current. The distribution and activation characteristics of arsenic in Si:C film and the interfacial solid-phase reaction of the Ni/Si:C system were studied with the aim of achieving the maximum improvement of the characteristics of e-Si:C S/D. It was clarified that the active carrier concentration of Si:C decreased with increasing carbon concentration compared to the control Si. There is concern that the low doping activation in Si:C increases series resistance of e-Si:C S/D nMOSFETs and degrades the performance gain expected from the strain effect.     

Enhanced corrosion resistance of Zr coating on biomedical TiNi alloy prepared by plasma immersion ion implantation and deposition

Zirconium film was prepared on TiNi alloy by plasma immersion ion implantation and deposition (PIIID) technique to enhance its corrosion resistance and prolong its working lifetime. The atomic force microscopy (AFM) results show that the film was relatively smooth with the root mean square roughness being 9.166 nm. The X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) results indicate that the implant element of Zr was oxidation partialness. The potentiodynamic polarization measurements in the Hank's solution at 37 °C show that the corrosion resistance of the alloy was improved by the Zr coating film and the atomic absorption spectrometry (AAS) tests also indicate that Ni ion concentration released from the substrate in the Hank's solution after the polarization test was reduced greatly, in comparison to the unmodified TiNi alloy sample.     

Dissolution of synthetic and bovine bone-derived hydroxyapatites fabricated by hot-pressing

Dissolving behavior of hydroxyapatite (HA) ceramics prepared from bovine bone (BHA) was investigated and compared with synthetic HA. BHA power was obtained by calcining at 800 °C for 1 h to remove organics and then attritor-milling for 24 h. Synthetic HA and BHA powders were prepared by hot-pressing at 1000 °C for 0.5 h under the pressure of 30 MPa in Ar atmosphere. Sintered densities of the synthetic HA and the BHA were about 96% and 95%, respectively. The BHA consisted of mainly HA and small amount of magnesium oxide. Immersion test revealed that there was no clear evidence of dissolution for the BHA, whereas extensive dissolution on the surface of the synthetic HA occurred in buffered water. Accordingly, dense hydroxyapatite from bovine bone was more stable than synthetic HA in liquid environment.     

Cellular reactions of osteoblast-like cells to a novel nanocomposite membrane for guided bone regeneration

This study investigated the bioactivity and biocompatibility of hydroxyapatite nanoparticles (n-HA)/Polyamide-66 (PA66) nanocomposite membrane and expanded-polytetrafluoroethylene (e-PTFE) membrane (as control) to MG63 osteoblast-like cells. The attachment and proliferation of the cells on the porous surface of nHA/PA66 membrane and the surface of e-PTFE membrane were evaluated by scanning electron microscope (SEM) observation and the MTT assay. The bioactivity of the cells on the surface of the two membranes was evaluated by testing cell viability and alkaline phosphatase (ALP) activities. The results suggested that the bioresponse of MG63 osteoblast-like cells on the porous surface of nHA/PA66 membrane was better than the bioresponse on the opposite surface of e-PTFE membrane. Because of a better cell attachment manner, there is a potential utilization of the guided bone regeneration (GBR) membrane to substitute nHA/PA66 membrane for e-PTFE membrane.     

Improving the bioactivity of NiTi shape memory alloy by heat and alkali treatment

TiO₂ films were formed on an NiTi alloy surface by heat treatment in air at 600 °C. Heat treated NiTi shape memory alloys were subsequently alkali treated with 1 M, 3 M and 5 M NaOH solutions respectively, to improve their bioactivity. Then treated NiTi samples were soaked in 1.5SBF to evaluate their in vitro performance. The results showed that the 3 M NaOH treatment is the most appropriate method. A large amount of apatite formed within 1 day's soaking in 1.5SBF, after 7 day's soaking TiO₂/HA composite layer formed on the NiTi surface. SEM, XRD, FT-IR and TEM results showed that the morphology and microstructure are similar to the human bone apatite.     

Secondary electron spectra of gold under bombardment by very low-energy positrons

Measurements of the secondary electron energy spectra resulting from very low-energy positron bombardment of a polycrystalline Au surface are presented. The low-energy part of the secondary spectra contain significant contributions from two processes: (1) annihilation-induced Auger electrons that have lost energy before leaving the surface and (2) secondary electrons resulting from direct energy exchange with an incident positron. Our data indicate that the second process (direct energy exchange with the primary positron) is still important at and below 3 eV incident beam energy. Since energy conservation precludes secondary electron generation below an incident beam energy equal to the difference between the electron and positron work functions (∼3 eV), the fact that we still observe significant secondary electron emission at energies at or below this value provides strong evidence that the incident positrons are falling directly into the surface state and transferring all of the energy difference to an outgoing secondary electron. These measurements were also used to obtain the first experimentally determined upper limit on the intensity of the spectrum of Auger-induced secondary electrons.     

Quantum Fluids of Self-Assembled Chains of Polar Molecules at Finite Temperature

The finite temperature properties of self-assembled dipole chains of polar molecules in strongly confined pancake traps are investigated. The single-chain vibrations at finite temperature, which become important for long chains in a strongly interacting regime, are found to lower the transition temperature and to shift the chain distribution by less than 10%. We also propose experimental parameters to observe such quantum phase transition.