Stabilization of self‐assembled microdroplets using short chain alcohols

The condensation of water vapor on a volatile polymeric solution leads to a porous surface after evaporation of both solvent and water. However, the stabilization of the water microdroplet is of great importance, which can be achieved using specific polymer or adding a third substance to the polymer solution. Short chain alcohols (methanol, ethanol, and n‐propanol) are utilized to fabricate a self‐assembled porous honeycomb film of linear, low molecular weight polystyrene using the breath figure technique. A combination of breath figure processing and the effect of alcohol on a water droplet can stabilize the pattern and make pores on the surface of the polymer film. The quality of the porous honeycomb film is strongly dependent on the type of alcohols and the concentration of polymer. In a specific range of polymer and alcohol concentration, pores cover all the surface of the polymer film. This method offers the possibility of producing a honeycomb structure with no trace of additive residual after the fabrication process and avoiding polymer modification. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 709–718     

新组合模型在光电功率预测中的应用

为提高光伏预测要求的精准性,文章提出一种新算法将神经网络和ARMA算法改进组合,构成NEW ARMA-BP模型算法.以某30兆瓦的光伏电站采集的输出功率为输入样本,基于ARMA和BP神经网络算法在Matlab环境下依次搭建了相应的预测模型,预估光伏短期输出量.采用"误差正态检验图"判断基于两种不同算法的误差水平,依据两种单模型预测误差,运用所提出的新方法计算权值并获得新的预测值.基于Matlab的仿真结论验证了组合预测在光伏输出预测领域的适用性.     

Simultaneous determination of eight short‐chain aliphatic amines in drug substances by HPLC with diode array detection after derivatization with halonitrobenzenes

Short‐chain aliphatic amines are a class of hazardous impurities in drug substances. A simple method, involving derivatization followed by high‐performance liquid chromatography with diode array detection, has been developed for residue determination of eight aliphatic amines simultaneously in drug substances. Different halonitrobenzenes derivatization reagents were systematically compared. As a result, 1‐fluoro‐2‐nitro‐4‐(trifluoromethyl)benzene was selected since the derivatization effectively shifted the absorption wavelength to the visible region (400–450 nm), where most drug substances, impurities and even the derivatization reagent absorb very weakly. Due to the redshift effect, interference was minimized and adequately low limits of quantitation were reached (0.24–0.80 nmol/mL). Moreover, the derivatization reaction was readily carried out in dimethyl sulfoxide at room temperature for 1 h using N ,N‐diisopropylethylamine as catalyst to achieve the highest yield. Without any pre‐treatment, the derivatives were analyzed by high‐performance liquid chromatography with diode array detection. The high stability of the derivatives within 24 h at room temperature (RSD<1.04%) further facilitated the simultaneous preparation and consecutive analysis of quantities of samples. Finally, the proposed method was successfully applied for residue determination of eight aliphatic amines simultaneously in eight drug substance samples. This study could be helpful for the routine analysis and residue control of aliphatic amines in drug substances.     

Pseudo‐differential operators in a Gelfand–Shilov setting

We introduce some general classes of pseudodifferential operators with symbols admitting exponential type growth at infinity and we prove mapping properties for these operators on Gelfand–Shilov spaces. Moreover, we deduce composition and certain invariance properties of these classes.     

Palatability Enhancement Potential of Hermetia illucens Larvae Protein Hydrolysate in Litopenaeus vannamei Diets

Marine feed ingredients derived from cephalopods (e.g., squid) and crustaceans (e.g., krill) are commercially used to improve the palatability of shrimp diets. Increase in global demand for shrimps has resulted in overfishing of these marine organisms and is a matter of concern. Insect protein hydrolysate could be a sustainable alternative for the possible replacement of these marine feed ingredients. During this study, four formulations: diet A (control: not containing any palatability enhancer), diet B (containing squid meal and krill oil), diet C (containing 1% insect protein hydrolysate), and diet D (containing 2% insect protein hydrolysate) were tested for (1) time required by first subject to begin feeding (time to strike) and (2) palatability in Litopenaeus vannamei. Additionally, the chemical composition of all four diet formulations was also analyzed. Results indicate that all diets had similar crude composition. The major essential amino acids in all diets were leucine and lysine, whereas eicosapentaenoic acid was the major omega-3 fatty acid in all diets. There were no significant differences between the mean time to strike for all the tested formulations. Palatability of tested formulations was found in the following order: diet D > diet C > diet B = diet A (p < 0.05), indicating that addition of squid meal and krill oil has no effect on palatability in comparison to control, whereas inclusion of insect protein hydrolysates significantly improves the palatability of formulations. Palatability enhancement potential of insect protein hydrolysate could be attributed to the high free amino acid content and water solubility in comparison to squid meal.     

Isomaltulose Exhibits Prebiotic Activity,and Modulates Gut Microbiota,the Production of Short Chain Fatty Acids,and Secondary Bile Acids in Rats

In vitro experiments have indicated prebiotic activity of isomaltulose, which stimulates the growth of probiotics and the production of short chain fatty acids (SCFAs). However, the absence of in vivo trials undermines these results. This study aims to investigate the effect of isomaltulose on composition and functionality of gut microbiota in rats. Twelve Sprague–Dawley rats were divided into two groups: the IsoMTL group was given free access to water containing 10% isomaltulose (w/w), and the control group was treated with normal water for five weeks. Moreover, 16S rRNA sequencing showed that ingestion of isomaltulose increased the abundances of beneficial microbiota, such as Faecalibacterium and Phascolarctobacterium, and decreased levels of pathogens, including Shuttleworthia. Bacterial functional prediction showed that isomaltulose affected gut microbial functionalities, including secondary bile acid biosynthesis. Targeted metabolomics demonstrated that isomaltulose supplementation enhanced cholic acid concentration, and reduced levels of lithocholic acid, deoxycholic acid, dehydrocholic acid, and hyodeoxycholic acid. Moreover, the concentrations of propionate and butyrate were elevated in the rats administered with isomaltulose. This work suggests that isomaltulose modulates gut microbiota and the production of SCFAs and secondary bile acids in rats, which provides a scientific basis on the use of isomaltulose as a prebiotic.     

复合材料柔软性对倒金字塔微结构阵列传感器性能的影响

采用模压成型方法制备了2种柔软性不同的热塑性聚氨酯/短切碳纤维/碳纳米管(TPU/SCF-CNT)复合材料复制物, 其表面上具有倒金字塔微结构阵列, 内部有SCF与CNT共同构成的导电通路. 将复合材料复制物和相应的复合材料平整片封装成柔性传感器. 结果表明, 压力作用下传感器内复制物和平整片之间的接触电阻因倒金字塔底棱的形变而显著降低. 对使用柔软性较高的复合材料封装的传感器, 虽然其相对迟滞稍大, 但压力作用下倒金字塔底棱形变量较大, 且复制物和平整片内导电通路增加量较大, 因此其在0~2.5 kPa的线性区内具有较高的灵敏度(0.32 kPa^?1). 制备的2种传感器均具有快速响应特性, 且能在500 s(约1580次)的循环压缩/释放测试(峰值压力约3 kPa)中保持较稳定的电阻响应. 研究表明, 利用模压成型的表面倒金字塔结构复合材料复制物封装成的柔性压力传感器具有良好的传感性能.     

裂纹端部细短纤维的应力分析

基于裂纹端部存在与其裂纹面相垂直的二相细短纤维分析模型，采用叠加原理推导了求解纤维表面应力分布函数的积分方程，通过简化得到了该方程的解析表达显式，该积分方程的特征值方程是纤维几何参数，材料常数以及纤维相对于裂纹位置的相关函数，当材料参数不满足特征方程时，积分方程将具有唯一解；并借助数值方法，给出了纤维剪应力分布算例，和纤维对应力强度因子的影响。     

Two-dimensional stability problem for two interacting short fibers in a composite: In-line arrangement

A solution is found to a plane problem for a composite material reinforced with two in-line fibers and subjected to longitudinal compression. The problem formulation is based on the piecewise-homogeneous model and the three-dimensional theory of stability. The dependence of the critical strain and buckling mode on the distance between the fibers is studied for various mechanical and geometrical characteristics of the composite components.Translated from Prikladnaya Mekhanika, Vol. 40, No. 9, pp. 65–74, September 2004.     

三氧化二铝短纤维对ZA22合金干摩擦磨损性能的影响

针对无油润滑场合的实际需要，采用挤压铸造法制取了Ａｌ２Ｏ３短纤维强化ＺＡ２２合金复合材料，并对其在干摩擦条件下的摩擦磨损性能进行了试验研究，同时还用扫描电子显微镜对试样磨损表面形貌进行了观察，进而对材料的磨损机理作了分析与讨论。结果表明，随着Ａｌ２Ｏ３短纤维含量的增大，ＺＡ２２／Ａｌ２Ｏ３复合材料的耐磨性能提高，但摩擦性能降低；当纤维取向垂直于摩擦而时，复合材料的摩擦磨损性能比纤维平行于摩擦面取向