STABILITY ANALYSIS OF A CAPACITIVE FGM MICRO-BEAM USING MODIFIED COUPLE STRESS THEORY

Based on the Modified Couple Stress Theory,a functionally graded micro-beam under electrostatic forces is studied.The FGM micro-beam is made of two materials and material properties vary continuously along the beam thickness according to a power-law.Dynamic and static pull-in voltages are obtained and it is shown that the static and dynamic pull-in voltages for some materials cannot be obtained using classic theories and components of couple stress must be taken into account.In addition,it is shown that the values of pull-in voltages depend on the variation through the thickness of the volume fractions of the two constituents.     

Contact vibration analysis of the functionally graded material coated half-space under a rigid spherical punch

This paper studies the contact vibration problem of an elastic half-space coated with functionally graded materials (FGMs) subject to a rigid spherical punch. A static force superimposing a dynamic time-harmonic force acts on the rigid spherical punch. Firstly, we give the static contact problem of FGMs by a least-square fitting approach. Next, the dynamic contact pressure is solved by employing the perturbation method. Lastly, the dynamic contact stiffness with different dynamic contact displacement conditions is derived for the FGM coated half-space. The effects of the gradient index, coating thickness, internal friction, and punch radius on the dynamic contact stiffness factor are discussed in detail.     

Free vibration of functionally graded sandwich plates using four-variable refined plate theory

This paper uses the four-variable refined plate theory (RPT) for the free vibration analysis of functionally graded material (FGM) sandwich rectangular plates.Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The theory presented is variationally consistent and strongly similar to the classical plate theory in many aspects. It does not require the shear correction factor, and gives rise to the transverse shear stress variation so that the transverse shear stresses vary parabolically across the thickness to satisfy free surface conditions for the shear stress. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM facesheet and the homogeneous core and the sandwich with the homogeneous facesheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton's principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. The validity of the theory is shown by comparing the present results with those of the classical, the first-order, and the other higher-ordex theories. The proposed theory is accurate and simple in solving the free vibration behavior of the FGM sandwich plates.     

ON THE FREE VIBRATION OF A SUBMERGED FGM HOLLOW SPHERE

The free vibration of a functionally graded material hollow sphere submerged in a compressible fluid medium is exactly analyzed. The sphere is assumed to be spherically isotropic with material constants being inhomogeneous along the radial direction. By employing a separation technique as well as the spherical harmonics expansion method, the governing equations are simplified to an uncoupled second-order ordinary differential equation, and a coupled system of two such equations. Solutions to these equations are given when the elastic constants and the mass density are power functions of the radial coordinate. Numerical examples are finally given to show the effect of the material gradient on the natural frequencies. The project is supported by the National Natural Sciences Foundation of China(No. 19872060).     

Thermal Buckling Analysis of FGM Sandwich Circular Plates Under Transverse Nonuniform Temperature Field Actions北大核心CSCD

Based on the von Kármán geometric nonlinear plate theory, the displacement⁃type geometric nonlinear governing equations for FGM sandwich circular plates under transverse nonlinear temperature field actions were derived. With the immovable clamped boundary condition, the analytical formula for dimensional critical buckling temperature differences of the system was obtained from the solution of the linear eigenvalue problem. Moreover, the 2⁃point boundary value problem of ordinary differential equations was solved with the shooting method. The effects of geometric parameters, constituent material properties, gradient indexes, temperature field parameters and layer⁃thickness ratios on the critical buckling temperature differences, the thermal postbuckling equilibrium paths, and the buckling equilibrium configurations of FGM sandwich circular plates, were investigated. The results show that, with the increases of the thickness⁃radius ratio, the relative thickness of the FGM layer and the gradient index, the FGM sandwich circular plate's critical buckling temperature difference will increase monotonically. Given a fixed radius and a fixed total thickness, the postbuckling deformation of the FGM sandwich circular plate will decrease significantly with the relative thickness of the FGM layer. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

线性分布荷载作用下梯度功能压电悬臂梁的解

采用逆解法求解了上表面受线性分布荷载作用的压电悬臂梁执行器，其中体积力$F_z$ 呈非线性分布. 首先确定了应力函数和电位移函数的多项式表达式，进而研究了该问题的 通解，以及体积力的不同分布对解答的影响. 常体积力和无体力情况下的解可以由上述 解直接得到. 本文为研究其它类型的压电梯度微观结构提供了一种可行的方法.     

A note on the Sarmanov bivariate distributions

We investigate the maximum correlation for Sarmanov bivariate distributions with fixed marginals and strengthen the existing results in the literature. The improvement in the maximum correlation is significant. A characterization of the Sarmanov distribution via chi-square divergence is also given. This extends Nelsen [13] result about the Farlie-Gumbel-Morgenstern (FGM) distribution.     

热荷载作用下Timoshenko功能梯度夹层梁的静态响应

在精确考虑轴线伸长和一阶横向剪切变形的基础上建立了Timoshenko功能梯度夹层梁在热载荷作用下的几何非线性控制方程.采用打靶法数值求解所得强非线性边值问题,获得了两端固支功能梯度夹层梁在横向非均匀升温作用下的静态热过屈曲和热弯曲变形数值解.分析了功能梯度材料参数变化、不同表层厚度和升温参数对夹层梁弯曲变形、拉-弯耦...     

Using a pseudo-functionally graded interlayer in order to improve the static and dynamic behavior of wind turbine blade T-bolt root joints

The large wind turbines blades with multi-ton composite structures are mostly connected to the peach-bearings flanges using T-bolt joints which induce shear and bearing stress fields around the cross bolts. The significant differences between the modulus of elasticity of metallic bolts and composite surrounding materials cause stress concentration around interfaced zones and, also, limit the load capacity of the joints. In the present research, a pseudo functionally graded material (PFGM) as an interlayer is used around the cross bolts to examine the reduction of the stress concentration. Some radial variation of the mechanical properties would be considered for this interlayer. The finite element method is used to analyze the structures. Loadings are applied to the center of the cross bolts analogous to the real cases. Both the static and dynamic loadings are studied. For the finite element of the functionally graded material interlayer, a multilayer alternative material with constant properties in each layer is used. The results show that using an isotropic single layer with an average modulus of elasticity and specific thickness decreases the stress concentration of the composite part up to 47%. The various property models for the interlayer also show that an appropriated model can decrease the stress concentration up to 55%. Dynamic transient analyses would be implemented over the joint structure and improved considering to the practical cases. Using the PFGM interlayer decreases the constant and variable parts of the stresses up to 55% and also causes significant increasing of the joint fatigue life.     

Characterization of the variation of the material properties in a freestanding inhomogeneous thin film

This Letter presents a new technique for measuring the variation of the material properties along the thickness in a freestanding inhomogeneous thin film. The analytical results reveal a simple relation between the material properties and the set of cut-off frequencies of Lamb waves. The influence of the graded properties on the variation of cut-off frequencies in three different kinds of models, including artificial FGM model, sub-surface damage model, and nano-porous thin film model, is discussed. These results provide theoretical guidance for characterizing the material property variations of MEMS/NEMS.