石英砂粒径对水合物沉积物力学性质的影响

利用自主研发的水合物沉积物原位合成与力学性质测试的高压低温三轴仪,通过多级加荷的试验方法,以不同粒径的砂粒作为沉积物骨架进行三轴压缩试验,得到了剪切过程的应力-应变关系曲线,以及不同粒径尺寸沉积物的强度,还有剪切过程中的体积变化关系。结果表明:含水合物沉积物强度随着沉积物粒径尺寸的增大而增强;在降压剪切过程中,所有粒径的水合物沉积物式样均有明显的剪缩现象。     

Janus Face All-cis 1,2,4,5-tetrakis(trifluoromethyl)- and All-cis 1,2,3,4,5,6-hexakis(trifluoromethyl)- Cyclohexanes

We report the synthesis of all-cis 1,2,4,5-tetrakis (trifluoromethyl)- and all-cis 1,2,3,4,5,6-hexakis (trifluoromethyl)- cyclohexanes by direct hydrogenation of precursor tetrakis- or hexakis- (trifluoromethyl)benzenes. The resultant cyclohexanes have a stereochemistry such that all the CF₃ groups are on the same face of the cyclohexyl ring. All-cis 1,2,3,4,5,6-hexakis(trifluoromethyl)cyclohexane is the most sterically demanding of the all-cis hexakis substituted cyclohexanes prepared to date, with a barrier (ΔG) to ring inversion calculated at 27 kcal mol⁻¹. The X-ray structure of all-cis 1,2,3,4,5,6-hexakis(trifluoromethyl)cyclohexane displays a flattened chair conformation and the electrostatic profile of this compound reveals a large diffuse negative density on the fluorine face and a focused positive density on the hydrogen face. The electropositive hydrogen face can co-ordinate chloride (K≈10³) and to a lesser extent fluoride and iodide ions. Dehydrofluorination promoted decomposition occurs with fluoride ion acting as a base.     

TNT炸药动静态变温三轴压缩力学性能的试验研究

介绍了一种高能材料动静态变温三轴压缩试验装置，在熔点以下温度，通过对国产单质炸药ＴＮＴ在中等应变速率（２－４／ｓ）及准静态（３×１０－３／ｓ）条件下三轴压缩力学性能的测试，得出ＴＮＴ的杨氏模量Ｅ、泊松比ν和屈服极限Ｙ，以及当加载速率和温度改变时这些参数的变化规律。并提出三轴应力状态下屈服极限的一种确定方法。该三轴压缩试验装置以及三轴压缩应力状态下力学参数的测试、分析、处理系统为研究高能材料力学性能提供了一套完整的技术和手段。     

大埋深粘土三轴高压卸载变形与强度特征

以取自山东巨野矿区埋深近 4 30～ 6 0 0m的深部粘土样为例 ,分析测试了土的常规物理力学性质参数。考虑该埋深土的天然应力水平及其在煤矿建井开挖中的卸载应力变化 ,在三轴伺服仪上 ,进行三向等压分别达 11MPa、12MPa、14MPa下的卸除围压、保持轴压的三轴高压卸载试验 ,分析了深部粘土三轴高压卸载变形和强度特点 ,得到了相关力学参数。成果丰富了土的高压卸载力学性研究 ,并为巨野矿区煤矿立井建设提供了工程地质基础参数     

含能材料三轴动态压缩实验的一个计算机模拟方法

在含能材料单轴、受限三轴动态压缩实验的基础上，提出一种将计算机数值模拟和实验数据相结合，估算实验系统中钢筒与试件间的库伦摩擦力，从而正确确定含能材料的动态三轴力学性能（弹性模量Ｅ，泊桑比ν，屈服限Ｙ等）的方法。本方法用于ＴＮＴ炸药受限三轴动态压缩实验，通过建立钢筒－试件的库伦摩擦有限元模型，采用ＡＤＩＮＡ通用程序进行动力分析，估算了摩擦力对实验数据的影响，获得了考虑摩擦力修正后的ＴＮＴ三轴动态压缩响应，为含能材料三轴动态力学性能的确定提供了一种有效的方法。     

Properties of the πh_(9/2)  νi_(13/2) band in odd-odd ~(188)Au

A new rotational band has been identified and assigned to 188Au for the first time using the 173Yb(19F,4nγ) reaction at the beam energies of 86 and 90 MeV. This band is proposed to be built on the πh9/2  νi13/2 configuration by comparing the band properties with known bands in neighboring nuclei. The prolate-to-oblate shape transition through triaxial shape has been proposed to occur around 188Au for the πh9/2  νi13/2 bands in odd-odd Au isotopes on the basis of total Routhian surface (TRS) calculations.     

Properties of the 3/2~-[521] band in the odd-N rare-earth nuclei

High-spin states in 161Er have been studied experimentally via the 150Nd(16O, 5n) reaction at a beam energy of 86 MeV. Three rotational bands built on the 5/2+[642], 3/2-[521], and 11/2-[505] configurations have been extended up to high-spin states, and particularly, the α = -1/2 branch of the ground state 3/2-[521] band has been revised significantly. It is found that signature inversion occurs in the 3/2-[521] band after the band crossing in 161Er. The systematics of the signature inversion associated wit...     

Determination of the Mechanical Properties of Powdered Agricultural Products and Sugar

Grain, forage cereals and different types of flour are commonly stored in silos. Their behavior within these structures is mainly governed by their mechanical properties. Since their advent, numerical methods have increasingly been used in silo design. However, the results obtained using these methods strongly depend on the variables employed to define the materials stored. Since the literature provides little information on the variables required for modeling the behavior of agricultural powdered materials, the goals of the present work were to: i) provide values for the different variables that are needed when designing silos using numerical methods (e.g., the Poisson ratio, the dilatancy angle and the modulus of elasticity, etc.), and ii) investigate the suitability of tests used in soil mechanics for powdered materials (e.g., the direct shear and the oedometric and triaxial test). Recommended values for these variables are proposed.     

Periodic orbits around the collinear libration points in the restricted three body problem when the smaller primary is a triaxial rigid body and bigger primary is a source of radiation pressure

Periodic orbits belonging to the stromgren families A, B and C around the collinear libration points in the restricted three body problem have been studied when the smaller primary is a triaxial rigid body and more massive body is a source of radiation pressure. These families are determined in three different cases: (i) classical case, (ii) when bigger primary is a source of radiation pressure, (iii) when smaller primary is a triaxial rigid body and bigger primary is a source of radiation pressure. The Liapunov stability of each periodic solution has also been examined.      

不同排水条件下饱和软黏土动力特性试验研究

以宁波轨道交通1号线沿线软黏土为研究对象, 开展了不同动应力幅值下的循环动三轴试验, 研究了不排水和部分排水对饱和软黏土累积塑性应变、动孔压、动弹性模量及动阻尼比的影响. 结果表明: 在排水条件下对饱和软黏土的动力特性影响较大, 尤其是动孔压; 随着振动次数的增加, 部分排水条件下的动孔压存在一个峰值, 动孔压先增大后减小; 当动应力幅值较大时, 部分排水条件下累积塑性应变和动阻尼比小于不排水条件下的结果, 动弹性模量则大于不排水条件下的值; 对试验结果进行归一化处理后, 获得了动弹性模量、动阻尼比以及累积塑性应变的内在关系.