Dispersive shock waves in three dimensional Benjamin–Ono equation

Dispersive shock waves (DSWs) in the three dimensional Benjamin–Ono (3DBO) equation are studied with step-like initial condition along a paraboloid front. By using a similarity reduction, the problem of studying DSWs in three space one time (3+1) dimensions reduces to finding DSW solution of a (1+1) dimensional equation. By using a special ansatz, the 3DBO equation exactly reduces to the spherical Benjamin–Ono (sBO) equation. Whitham modulation equations are derived which describes DSW evolution in the sBO equation by using a perturbation method. These equations are written in terms of appropriate Riemann type variables to obtain the sBO-Whitham system. DSW solution which is obtained from the numerical solutions of the Whitham system and the direct numerical solution of the sBO equation are compared. In this comparison, a good agreement is found between these solutions. Also, some physical qualitative results about DSWs in sBO equation are presented. It is concluded that DSW solutions in the reduced sBO equation provide some information about DSW behavior along the paraboloid fronts in the 3DBO equation.     

Monotonicity in high‐order curvilinear finite element arbitrary Lagrangian–Eulerian remap

The remap phase in arbitrary Lagrangian–Eulerian (ALE) hydrodynamics involves the transfer of field quantities defined on a post‐Lagrangian mesh to some new mesh, usually generated by a mesh optimization algorithm. This problem is often posed in terms of transporting (or advecting) some state variable from the old mesh to the new mesh over a fictitious time interval. It is imperative that this remap process be monotonic, that is, not generate any new extrema in the field variables. It is well known that the only linear methods that are guaranteed to be monotonic for such problems are first‐order accurate; however, much work has been performed in developing non‐linear methods, which blend both high and low (first) order solutions to achieve monotonicity and preserve high‐order accuracy when the field is sufficiently smooth. In this paper, we present a set of methods for enforcing monotonicity targeting high‐order discontinuous Galerkin methods for advection equations in the context of high‐order curvilinear ALE hydrodynamics. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.     

CH4/空气简化动力学机理数值验证

选择绕圆柱预混燃烧算例，验证CH₄/空气三种简化动力学机理（16s41r、15s19r和53s325r）.考虑均匀来流，忽略湍流和湍流与燃烧相互作用以及燃料扩散效应，假设层流有限反应速率，采用保自由流5阶WENO格式求解多组分Euler方程组，得到CH₄/空气预混燃烧流场温度等值线、沿驻点线压力和温度及其CH₄、CO和CO₂质量百分数分布.结果表明：三种简化动力学机理给出的流场均出现弓形激波和火焰面，弓形激波和火焰驻点距离及其形状、诱导区宽度和简化动力学机理相关.当圆柱直径增大，弓形激波和火焰向圆柱上游移动，对应的驻点距离均增大，诱导区宽度变短，点火延时变小，但火焰和弓形激波位置次序未变化.53s325r模型要比16s41r模型和15s19r模型精度要高，点火延时覆盖的压力和温度范围也较宽，所有简化机理均未完全反应，在较大圆柱直径下游达到化学平衡.     

高速气体与椭圆柱云相互作用的数值研究

高速颗粒流在天文、自然灾害、工业安全、医疗工业和国防等领域有着重要应用。采用基于分层流模型的直接数值模拟方法,对平面激波与椭圆柱云的相互作用进行数值研究,重点关注椭圆柱横截面的不同长短轴之比和椭圆柱横截面长轴与来流方向所成角度对流场的影响,从气体来流方向上的速度、x轴和y轴方向上的均方根速度、动能、内能和湍动能的分布上进行分析,对能量在计算域的上游区域、椭圆柱云区域和下游区域进行定量分析。同时针对椭圆柱改进了一维体积平均模型,利用该模型拟合了由直接数值模拟得到的反射激波和透射激波位置,获得了最适配的一维体积平均模型中的人工有效阻力系数,并探讨此系数的分布规律。     

柱状装药预制破片缩比战斗部爆炸冲击波和破片的作用时序

针对柱状装药的周向预制破片战斗部,结合无量纲分析方法和爆炸驱动理论,确定了影响破片和冲击波相遇位置的关键参数,给出了由缩比战斗部推广预测原型战斗部爆炸产生的破片冲击波作用时序的方法。采用ANSYS/LS-DYNA有限元软件进行数值模拟,对比验证了理论分析和数值试验结果,分析了战斗部缩比比例对冲击波和破片作用时序的影响。结果表明:缩比模型与原型战斗部爆炸产生的破片和冲击波的相遇位置之比和相遇时间之比主要取决于两模型的质量比,在不考虑破片速度衰减时,两模型中载荷相遇位置之比和相遇时间之比等于其质量比的0.33次方。受破片速度衰减影响,该方法仅适用于质量缩比不小于0.2的模型。     

爆炸荷载作用下方形夹芯板动力学响应与优化设计数值分析

为研究方形蜂窝铝板在爆炸荷载作用下的动力学响应,基于LS-DYNA非线性有限元软件,建立了TNT炸药-前后面板-蜂窝夹芯-空气的三维有限元模型。采用ALE(任意的拉格朗日欧拉)多物质流固耦合算法分析了蜂窝铝板在冲击荷载作用下的变形机理、塑性变形、能量吸收以及结构的优化。数值模拟结果表明:随着面板厚度、核心高度的增加,蜂窝铝板在冲击荷载作用下的塑性变形明显减小,抵抗变形的能力增强;随着爆轰入射角度的增加,结构的破坏程度有所减小,入射角越大这种效果越发明显。对结构给定边长和受冲击面积以及面板厚度配合比、夹芯量纲为一的高度进行了局部的优化分析,为设计优质铝蜂窝板提供参考。     

The pyrolysis of propane

The pyrolysis of propane plays an important role in determining the combustion properties of natural gas mixtures and offers insight into the cracking patterns of larger fuels. This work investigates propane pyrolysis behind reflected shock waves with a multiwavelength laser-absorption speciation technique. Nine laser wavelengths, sensitive to key pyrolysis species, were used to measure absorbance time histories during the decomposition of 2% propane in argon between 1022 and 1467 K, 3.7-4.3 atm. Absorbance models were developed at each diagnostic wavelength to interrogate common initial conditions, and time histories of all major species are reported at 1250, 1290, 1330, 1370, and 1410 K. Nearly complete carbon recovery observed at lower temperatures enabled the inference of hydrogen formation from atomic conservation, while decaying carbon recovery at high temperatures suggests the formation of allene and 1-butene. The results show systematically faster pyrolysis than predicted by kinetic modeling and motivate further study into the kinetics of propane pyrolysis.     

分子动力学模拟冲击波加载下CL-20/BTF共晶的分解

本文采用Reax FF-lg分子反应性力场研究了六硝基六氮杂异伍兹烷(CL-20)和苯并三氧化呋咱(BTF)形成的共晶在冲击波加载下的反应情况。结果发现:冲击波速度为Us=9 km·s-1时,含能分子快速分解。冲击加载在不同方向上时,分解速率不同,冲击波沿X轴方向时分解最快。反应早期主要是N-NO2键的断裂,生成NO2。较大分子质量的团簇会出现在反应前期,随着反应的进行团簇数量增加。整个模拟过程中,主要产物N2的数目有较大波动,28 ps达最大值。冲击波速度对反应后期的影响较小。     

The effect of external forces on the initial dissociation of RDX (1,3,5‐trinitro‐1,3,5‐triazine): A mechanochemical study

Experimental and theoretical studies have proposed different initiation reactions for the decomposition of hexahydro‐1,3,5‐trinitro‐1,3,5‐triazine (RDX). Three primary reactions are considered to start RDX decomposition: homolytic N? N bond fission, HONO elimination, and concerted fission of C? N bonds. The focus of this article is to study the effect of external forces on the energy barrier and reaction energies of all three mechanisms. We used the Nudged Elastic Band method along with ab initio Density Functional Theory within the framework of a generalized force‐modified potential energy surface (G‐FMPES) to calculate the minimum energy paths at different compressive (corresponding to pressure between approximately 6 and 294 MPa) and expansive force values (between 10 and 264 pN). For all three reactions, the application of an expansive force increases the exothermicity and lowers the energy barriers to different extents, while a compressive force decreases the exothermicity and raises the energy barrier to different extents.     

On a single discrete scale for preventive maintenance with two shock processes affecting a complex system

A new approach to optimal maintenance of systems (networks) is suggested. It is applied to systems subject to two external independent shock processes. A system ‘consists’ of two parts, and each shock process affects only its own part. A new notion of bivariate signature is suggested and used for obtaining survival characteristics of a system and further optimization of the preventive maintenance actions. The preventive maintenance optimization is considered in the univariate discrete scale that counts the overall numbers of shocks of both types. An example of a transportation network is considered. Copyright © 2016 John Wiley & Sons, Ltd.