表面喷砂对有机玻璃沿面闪络性能影响

绝缘子表面粗糙处理是提升其沿面闪络性能的重要途径,表面粗糙化处理方式不当,极易带来表面结构不均匀,难以获得稳定耐压性能的绝缘材料。为提升绝缘子表面粗糙处理的均匀性,本文利用表面喷砂技术对圆柱形有机玻璃(PMMA)绝缘子进行了粗糙化处理研究,以球形二氧化硅(SiO2)颗粒为工作介质,研究了不同喷砂粒径、氢氟酸后处理等因素对绝缘材料表面形貌和组分的影响,并利用短脉冲高压测试平台对喷砂处理前后有机玻璃绝缘子样品进行了真空沿面闪络性能测试。研究结果表明,喷砂处理在有机玻璃表面形成了较为均匀的凹坑,HF酸能够有效去除表面残留的SiO2颗粒,具有表面喷砂粗糙结构的绝缘子沿面闪络电压得到了稳定提升,相较于未处理的绝缘子闪络电压提升了约80%。     

机械磨抛对CdZnTe薄膜阻变特性的影响

采用磁控溅射法在ITO玻璃上制备了CdZnTe薄膜,探究机械磨抛对CdZnTe薄膜阻变特性的影响。通过对XRD图谱、Raman光谱、AFM显微照片等实验结果分析阐明了机械磨抛影响CdZnTe薄膜阻变特性的物理机制。研究结果表明,磁控溅射制备的薄膜为闪锌矿结构,F43m空间群。机械磨抛提高了CdZnTe薄膜的结晶质量;CdZnTe薄膜粗糙度(Ra)由磨抛前的3.42 nm下降至磨抛后的1.73 nm;磨抛后CdZnTe薄膜透过率和162 cm^-1处的类CdTe声子峰振动峰增强;CdZnTe薄膜的阻变开关比由磨抛前的1.2增加到磨抛后的4.9。机械磨抛提高CdZnTe薄膜质量及阻变特性的原因可能是CdZnTe薄膜在磨抛过程中发生了再结晶。     

自由来流湍流与三维壁面局部粗糙诱导平板边界层不稳定T-S波的数值研究

采用直接数值模拟（DNS）方法,研究了在自由来流湍流与三维壁面局部粗糙作用下平板边界层内诱导产生不稳定T-S波的物理问题.数值结果可知,在平板边界层内发现了二维和三维T-S波组成的波包空间序列以及求得了波包向前传播的群速度大小,从而证明了自由来流湍流与三维壁面局部粗糙作用是激励平板边界层内诱导产生不稳定T-S波的一种机制.随后,建立了平板边界层内被激发的二维和三维T S波的初始幅值与自由来流湍流度,三维壁面局部粗糙的流向长度、展向宽度及法向高度之间的关系.这一问题的深入研究,进一步完善了流动稳定性与湍流理论.     

Mechanical polishing,surface roughness,near‐surface deformation,and electrochemical corrosion of Alloy 690TT

The effects of mechanical grinding/polishing, surface roughness, and near‐surface deformation on the electrochemical corrosion behavior of thermally treated (TT) Alloy 690 were studied in a sodium chloride solution. The X‐ray photoelectron spectroscopy and transmission electron microscopy analyses revealed that mechanical grinding/polishing can change the ratio of the elements at the surface of the as‐received Alloy 690TT specimen by removing its Cr‐rich outer layer and causing deformation at the near‐surface microstructure, something which has a direct impact on the rate of the oxygen reduction reaction (ORR), the pitting potential (E_pit), and the corrosion potential (E_corr) of Alloy 690TT. It was observed that the ratio of Cr in the surface is a significant factor that controls the rate of the ORR and the corrosion parameters such as E_corr. Higher amounts of Cr at the surface accelerate the ORR. The near‐surface deformation shifts the E_pit values towards less positive potentials. It was also found that due to the different near‐surface chemical composition of the as‐received Alloy 690TT specimen compared with the ground and the polished specimens, the surface roughness parameters do not have a regular correlation with the rate of the ORR and the values of the E_corr and the E_pit. Only the passive current density increases when the surface roughness is increased. Copyright © 2015 John Wiley & Sons, Ltd.     

超疏水涂层表面粗糙结构对防覆冰性能的影响

结冰给交通、电力输送和航空等领域带来极大的安全隐患,研究防覆冰技术具有重要的应用价值。目前最具前景的防冰方法是涂层防冰,本文介绍了疏水涂层的构建方法,阐述了涂层疏水性和疏冰性之间的关系;重点论证了涂层表面粗糙结构对其防覆冰性能的影响,指出防覆冰涂层研发中存在的问题,并对该领域的发展趋势进行了分析和展望。     

Open channel turbulent flow over hemispherical ribs

This paper reports an experimental investigation of open channel turbulent flow over hemispherical ribs. A row of ribs consists of hemispheres closely placed to one another in the spanwise direction and cover the entire span of the channel. The pitch-to-height ratio is varied to achieve the so-called d-type, intermediate and k-type roughness. The Reynolds numbers based on water depth, h, and momentum thickness, θ, of the approach flow are respectively, Re_h = 28,100 and Re_θ = 1800. A particle image velocimetry is used to obtain detailed velocity measurements in and above the cavity. Streamlines, mean velocity and time-averaged turbulent statistics are used to study the effects of pitch-to-height ratio on the flow characteristics and also to document similarities and differences between the present work and prior studies over two-dimensional transverse rods. It was observed that interaction between the outer flow and the shear layers generated by ribs is strongest for k-type and least for d-type ribs. The results also show that hemispherical ribs are less effective in augmenting flow resistance compared to two-dimensional transverse ribs. The levels of the Reynolds stresses and budget terms increase with increasing pitch-to-height ratio inside the roughness sublayer.     

DIFFERENCE BETWEEN ARTIFICIAL AND COMMERCIAL PIPES IN TRANSITION ZONE1)

管路沿程损失是教学中要讲的内容。其中在过渡粗糙区,人工管和商业管的沿程损失系数存在差异。本文对此差异做了初步分析。从学生对此差异的理解和表面粗糙度的含义两方面探讨了表面粗糙度对此差异的影响。量化探讨表面粗糙度在过渡粗糙区的作用仍是个问题。     

Effects of oxidation and surface roughness on contact angle

Contact angle is known to be a parameter that effects boiling. This study was undertaken to measure contact angle of high and low surface tension fluids on copper and aluminum surfaces.Data were taken for polished, oxidized, and rough surfaces. A simple, yet fairly accurate method of measuring the static equilibrium contact angle of a solid/liquid interface is presented. The principles of a line light source and tilting plate were modified and then combined in the design of this apparatus. The angles obtained and their variation with the solid surface properties were in good agreement with previously published data. The contact angle of distilled water o of the organic fluids and refrigerants tested were in the range of 2–5°. Roughness and oxidation reduce the contact angle. If the depth of the roughness is less than 0.5 μm contact angle. The apparatus is fairly simple in construction, is inexpensive, and has good reproductibity. The measured angles were then compared to those measured with the sessile drop method.     

Characterization of the channel walls roughness in photonic crystal fibers

We present electron microscope (FEI NanoSEM) and atomic force microscopy measurements of surface roughness in nanochannels in photonic crystal fibers (PCF). A method was invented to cleave the PCF along the axis without damaging the surface structure in the nanochannels allowing us to characterize the morphology of the nanochannels in the PCF. A multi-wall carbon nanotube mounted onto commercial AFM probes and super sharp silicon non-contact mode AFM probes were used to characterize the wall roughness in the nanochannels. The roughness is shown to have a Gaussian distribution, and has an amplitude smaller than 0.5 nm. The height–height correlation function is an exponential correlation function with an autocorrelation length of 13 nm, and 27 nm corresponding with scan sizes of 200×100 nm², and 1600×200 nm², respectively.     

微粗糙结构表面液滴浸润特性的多体耗散粒子动力学研究

超疏水表面因其优异的自洁作用一直是表面科学领域关注的重点.本文使用多体耗散粒子动力学(many-body dissipative particle dynamics, MDPD)方法模拟研究了不同粗糙结构下液滴的浸润特性, 并与Cassie-Baxter理论进行了对比. 研究使用了一种具有长吸短斥作用的流固作用函数来获得不同的液滴浸润性, 并利用一种简洁的数值方法来测量接触角. 模拟结果表明本研究方法能够稳定地捕捉到液滴在粗糙表面的静态和动态特性. 模拟了粗糙结构对三相接触线运动的黏滞作用, 与物理实验结果相符合, 表明Cassie-Baxter理论在实际应用中尚存在一定局限性. 研究分析了在动态铺展过程中的能量转化关系, 并指出在低值表面容易引起液滴反弹.