超空泡射弹水下侵彻靶板三相耦合数值模拟

超空泡射弹侵彻问题的实质是特殊水下结构受到高速冲击载荷作用下的动态响应。对12.7 mm口径超空泡射弹侵彻典型水下目标壳体的毁伤效果开展研究,基于LS-DYNA有限元分析软件建立水环境中超空泡射弹垂直侵彻曲面靶板的等效模型,探讨射弹侵彻过程中动能侵彻和气泡溃灭对靶板联合毁伤效果,获得了靶板在各阶段的应力变化和结构变形规律。结果表明:侵彻靶板前,射弹着靶速度为200 m/s时的头部表面水介质压力峰值达768 N,靶板表面有明显下凹变形;侵彻靶板时,伴随着射弹动能侵彻和气泡溃灭冲击,水介质造成的影响不足动能侵彻的2%;侵彻靶板后,在靶板正面形成峰值速度为42 m/s的水射流进一步作用于破口;靶板整体弯曲变形,在200~300 m/s范围内,随着射弹着靶速度的增加,靶板弯曲形变量减小;靶板局部发生延性穿孔,射弹在水环境中具有更好的破口效果,射弹速度变化对破口尺寸影响不大。     

Oblique Perforation of Thick Metallic Plates by Rigid Projectiles

Oblique perforation of thick metallic plates by rigid projectiles with various nose shapes is studied in this paper. Two perforation mechanisms, i.e., the hole enlargement for a sharp projectile nose and the plugging formation for a blunt projectile nose, are considered in the proposed analytical model. It is shown that the perforation of a thick plate is dominated by several non-dimensional numbers, i.e., the impact function, the geometry function of projectile, the non-dimensional thickness of target and the impact obliquity. Explicit formulae are obtained to predict the ballistic limit, residual velocity and directional change for the oblique perforation of thick metallic plates. The proposed model is able to predict the critical condition for the occurrence of ricochet. The proposed model is validated by comparing the predictions with other existing models and independent experimental data.The English text was polished by Keren Wang     

NORMAL EXPANSION THEORY FOR PENETRATION OF PROJECTILE AGAINST CONCRETE TARGET

Based on the equations which describe the dynamic behavior of material under high-velocity and high-pressure shock, corresponding equations at shock front whose surface is general space curve surface were established. For concrete material, a normal expansion theory was proposed by which some deceleration about time history of the projectile can be analytically given. This normal expansion theory is not only suitable for spherical and cylindrical-nose projectile, but also suitable for other general nose projectile, for example conical nose or ogive-nose. And it is not only suitable for perpendicular shock but also for oblique shock.     

A STUDY ON THE COUNTER-INTUITIVE BEHAVIORS OF PIN-ENDED BEAMS UNDER PROJECTILE IMPACT

The counter-intuitive behaviors of pin-ended beams under the projectile impact are investigated with ANSYS/LS-DYNA in this paper. It studies in detail their displacement-time history curves, final deformed shapes, energy relationships and projectile impact velocity ranges related to their counter-intuitive behaviors. The influences of the impact positions on their counterintuitive behaviors are also discussed. The results show that no matter where the impact position on the beam is, the counter-intuitive behaviors of pinned beams will occur as long as the impacting velocity lies within a proper range. Corresponding to the occurring of the counter-intuitive behaviors, the rebounding number in the displacement history curves of the beams decreases from a few times to zero with an increase of the impact velocity. The final deformation modes of the beam corresponding to the counter-intuitive behaviors will appear in symmetrical and unsym-metrical forms no matter where the impact position is; the impact velocity of the first-occurring of the counter-intuitive behaviors of the beam increases slowly with the deviation of the impact position away from the mid-span.     

随机参数超空泡射弹弹道随机特性分析

超空泡射弹的发射装置及射弹在制造,安装过程中存在各种不确定性.本文采用最大熵法来分析这些不确定性对射弹弹道的影响.介绍了超空泡射弹的动力学模型,对射弹的受力特性和随机参数进行了分析.根据给出的理论编制了基于最大熵法的随机参数超空泡射弹弹道随机特性分析的仿真程序,并对一个模型弹仿真计算.计算表明,与发射装置有关的随机参数...     

射弹倾斜撞击带盖板炸药引发爆轰的条件

用二级轻气炮发射圆柱形、球形钢射弹以不同的角度撞击带不同厚度钢盖板的 ＴＮＴ／ＲＤＸ（４０／６０）炸药，得到了不同条件下引发炸药爆轰的阈值射弹速度。可以用ｖｄ~　（１／２）＝（１ ＋ｋ）［Ａ＋Ｂｈ／（ｄｃｏｓ）］描述临界引爆条件。对于带钢盖板的ＴＮＴ／ＲＤＸ（４０／６０）炸药，Ａ＝ ３．３３．Ｂ＝５．３４；圆柱形平头射弹撞击，ｋ／７５，球形射弹撞击，ｋ０．５＋０．２（１／ｃｏｓ－１）。由 此，本研究将Ｊａｃｏｂｓ 引爆判据推广到了斜碰撞条件。     

Al2O3陶瓷复合靶抗长杆弹侵彻性能和机理实验研究

用DOP(depthofpenetration)实验研究了质量分数为 90 %的Al2 O3 陶瓷复合靶抗长杆弹侵彻性能。实验表明 :随陶瓷厚度的增加 ,以差分效益系数和靶平均阻力表征的陶瓷复合靶的抗长杆弹侵彻性能降低 ;盖板能增强陶瓷复合靶抗侵彻性能。对回收陶瓷和盖板的破坏特征分析表明 :长杆弹对陶瓷复合靶侵彻过程大致可分为初期侵彻和稳定侵彻两个阶段 ,但对薄靶和厚靶 ,两个阶段在整个侵彻过程中所占比重不同。     

Projectile fragment emission in the fragmentation of 56Fe on C,Al and CH2 targets at 471 A MeV

The emission angle and the transverse momentum distributions of projectile fragments produced in the fragmentation of 56Fe on CHs, C and A1 targets at 471 A MeV are measured. It is found that for the same target, the average value and width of the angular distribution decrease with an increase of the projectile fragment charge; for the same projectile fragment, the average value of the distribution increases and the width of the distribution decreases with increasing the target charge number. The transverse momentum distribution of a projectile fragment can be explained by a single Gaussian distribution and the averaged transverse momentum per nucleon decreases with the increase of the charge of projectile fragment. The cumulated squared transverse momentum distribution of a projectile fragment can be explained well by a single Rayleigh distribution. The temperature parameter of the emission source of the projectile fragment, calculated from the cumulated squared transverse momentum distribution, decreases with the increase of the size of the projectile fragment.     

大孔径双向聚能射孔弹的研究

 设计了一种双锥药型罩与双向装药结构相结合的聚能射孔弹模型,通过数值模拟方法研究其射流成型机理,并计算其射流参数。结果显示：双锥药型罩的小锥角部分形成聚能射流,大锥角部分形成翻转弹丸,射流头部和弹丸的速度分别为6 250 m/s和1 620.9 m/s,弹丸长度和平均直径分别为26.1 mm和8.6 mm。结合数值模拟结果,对射流侵彻公式进行了修正,并利用修正公式预测该射孔弹侵彻钢靶的深度,计算结果为69.6 mm。最后,按照该模型进行侵彻实验,实验回收弹丸的长度和平均直径分别为28.1 mm和8.8 mm,侵彻钢靶的深度和孔径分别为70 mm和17 mm。实验表明：数值模拟与理论计算方法相结合是可行的,能够有效地计算射孔弹的射流参数并预测其侵彻深度;该射孔弹侵彻性能优越。     

杆式射流侵彻半无限靶的理论分析

 理论分析高速杆式射流侵彻半无限靶过程时,考虑速度梯度对聚能射流的影响,将射流进行分段计算,得到了射流拉伸后实际碰靶时的微元长度和直径变化。采用伯努利方程和静力学方法,通过对射流形状和速度分布作线性近似,理论分析了高速杆式射流侵彻半无限靶的过程,得到了靶体中的侵彻深度和侵彻孔径与射流长度、速度及直径之间的关系。将模拟结果与实验结果进行对比,结果表明理论分析结果与侵彻实验结果符合较好。