TFSI钝化晶体硅表面性质的第一性原理研究

晶体硅表面钝化是高效率晶体硅太阳能电池的核心技术,直接影响晶体硅器件的性能。本文采用第一性原理方法研究了一种超强酸-双三氟甲基磺酰亚胺(TFSI)钝化晶体硅(001)表面。研究发现,TFSI的四氧原子结构能够与Si(001)表面Si原子有效成键,吸附能达到-5.124 eV。电子局域函数研究表明,TFSI的O原子与晶体硅表面的Si的成键类型为金属键。由态密度和电荷差分密度分析可知,Si表面原子的电子向TFSI转移,从而有效降低了Si表面的电子复合中心,有利于提高晶体硅的少子寿命。Bader电荷显示,伴随着TFSI钝化晶体硅表面的Si原子,表面Si原子电荷电量减少,而TFSI中的O原子和S原子电荷电量相应增加,进一步证明了TFSI钝化Si表面后的电子转移。该工作为第一性原理方法预测有机强酸钝化晶体硅表面的钝化效果提供了数据支撑。     

Mn2+、N2-共掺杂Zn2GeO4晶体电子结构和光学性质的研究

采用基于密度泛函理论的平面波超软赝势方法对本征Zn2GeO4，Mn2+掺杂Zn2GeO4，Mn2+/N2-共掺杂Zn2GeO4超晶胞进行了几何结构优化，计算了掺杂前后体系的晶格常数、能带结构、态密度和光学性质。结果表明，Mn离子掺入后，Mn离子3d轨道与O离子2p轨道之间有强烈的轨道杂化效应，掺杂系统不稳定，而Mn/N离子共掺后，Mn离子和N离子之间的吸引作用克服了Mn离子之间的排斥作用，能够明显地提高掺杂浓度和体系的稳定性。光学性质计算结果表明，Mn离子与N离子共掺杂能改善Zn2GeO4电子在低能区的光学跃迁特性，增强电子在可见光区的光学跃迁；吸收谱计算结果显示，Mn离子与N离子掺入后体系对低频电磁波吸收增加。     

A Theoretical study on the charge and discharge states of Na-ion battery cathode material,Na1+xFePO4F

Na₂FePO₄F is a promising cathode material for a Na-ion battery because of its high electronic capacity and good cycle performance. In this work, first principle calculations combined with cluster expansion and the Monte Carlo method have been applied to analyze the charge and discharge processes of Na₂FePO₄F by examining the voltage curve and the phase diagram. As a result of the density functional theory calculation and experimental verification with structural analysis, we found that the most stable structure of Na_1.5FePO₄F has the P2₁/b11 space group, which has not been reported to date. The estimated voltage curve has two clear plateaus caused by the two-phase structure composed of P2₁/b11 Na_1.5FePO₄F and Pbcn Na₂FePO₄F or Na₁FePO₄F and separated along the c-axis direction. The phase diagram shows the stability of the phase-separated structure. Considering that Na₂FePO₄F has diffusion paths in the a- and c-axis directions, Na₂FePO₄F has both innerphase and interphase diffusion paths. We suggest that the stable two-phase structure and the diffusion paths to both the innerphase and interphases are a key for the very clear plateau. We challenge to simulate a nonequilibrium state at high rate discharge with high temperature by introducing a coordinate-dependent chemical potential. The simulation shows agreement with the experimental discharge curve on the disappearance of the two plateaus. © 2018 Wiley Periodicals, Inc.     

Effect of Zr concentration on the mechanical and thermodynamic properties of NbIr3 intermetallic compounds from theoretical estimations

ABSTRACT

The iridium is an important metal which has excellent resistance to corrosion at high temperature. L1₂ intermetallic compounds i.e. Ir₃Nb and Ir₃Zr, with similar lattice parameters are ideal for working at high temperature. They are fully soluble due to their low lattice misfit. A first-principle investigation into the effect of doping Zr with different concentrations on the electronic structure, mechanical and thermodynamic properties of NbIr₃ has been studied to prompt the development of novel high-temperature materials. Nine Zr_xNb_8?xIr₂₄ compounds are carefully considered. The results show that adding Zr into these compounds can strengthen their structural stability and ductility. Nevertheless, it reduces the elastic modulus and elastic stiffness. Simultaneously, with the increase of Zr content, the thermodynamic properties of these compounds decrease. It is also found that the changes of elastic modulus are mainly attributed to the variations of bonds in these compounds.     

Euler Characteristics on virtually free products

We define Euler characteristics on classes of residually finite and virtually torsion free groups and we show that they satisfy certain formulas in the case of amalgamated free products and HNN extensions over finite subgroups. These formulas are obtained from a general result which applies to the rank gradient and the first L²?Betti number of a finitely generated group.     

Enhanced electronic and nonlinear optical responses of C24N24 cavernous nitride fullerene by decoration with first row transition metals; A computational investigation

The electronic (energy gap and work function) as well as electrical properties (dipole moment, polarizability, and first hyperpolarizabilities) of the first-row transition metals decorated C₂₄N₂₄ cavernous nitride fullerene were explored using DFT calculations. The transition metals are decorated at N4 cavity of C₂₄N₂₄ fullerene. According to our spin polarized computations, the most stable spin state monotonically increases to sextet for Mn@C₂₄N₂₄ and thereafter dropped off gradually to singlet state for Zn@C₂₄N₂₄ system. The findings demonstrate that transition metals can remarkably decrease the HOMO-LUMO energy gap and work function values up to 63% and 21% of bare C₂₄N₂₄, respectively. As can be seen, when the Sc and Ti metals are located above the N4 cavity of fullerene, systems of enhanced static hyperpolarizabilities (β₀) are delivered. These findings might provide an effective strategy to design high performance eletcro-optical materials based on carbon- nitride fullerene.     

Charged pion condensation in anti-parallel electromagnetic fields and nonzero isospin density

The formation of charged pion condensate in anti-parallel electromagnetic fields and in the presence of the isospin chemical potential is studied in the two-flavor Nambu-Jona-Lasinio model.The method of Schwinger proper time is extended to explore the quantities in the off-diagonal flavor space,i.e.the charged pion.In this framework,π^± are treated as bound states of quarks and not as point-like charged particles.The isospin chemical potential plays the role of a trigger for charged pion condensation.We obtain the associated effective potential as a function of the strength of the electromagnetic fields and find that it contains a sextic term which possibly induces a weak first order phase transition.The dependence of pion condensation on model parameters is investigated.     

三氨基三硝基苯基高聚物粘结炸药热力学性质的理论计算研究

高聚物粘结炸药(PBX)的热力学性质是用于炸药结构响应、安全性评估、数值模拟分析等的重要参数.由于PBX结构的多尺度特性,完全采取实验方法精细表征这些参数存在巨大的挑战.本文运用第一性原理和分子动力学计算的方法,系统研究了三氨基三硝基苯(TATB)基高聚物粘结炸药的热力学参数和界面热传导性质.利用散射失配模型研究了TATB与聚偏二氟乙烯(PVDF)界面的热传导过程,发现热导率随温度升高而上升,并且在高温情况下接近于定值.基于分子动力学获得的TATB热导率并结合界面热导率,分析了PBX炸药的热导与颗粒尺寸的关系,当颗粒尺寸大于100 nm时,界面热阻对于PBX热导率的影响有限.     

Solvability of a nonlinear fifth‐order difference equation

Some formulas for well‐defined solutions to four very special cases of a nonlinear fifth‐order difference equation have been presented recently in this journal, where some of them were proved by the method of induction, some are only quoted, and no any theory behind the formulas was given. Here, we show in an elegant constructive way how the general solution to the difference equation can be obtained, from which the special cases very easily follow, which is also demonstrated here. We also give some comments on the local stability results on the special cases of the nonlinear fifth‐order difference equation previously publish in this journal.     

MoO_3/Si界面区钼掺杂非晶氧化硅层形成的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法,通过模拟MoO_3/Si界面反应,研究了MoO_x薄膜沉积中原子、分子的吸附、扩散和成核过程,从原子尺度阐明了缓冲层钼掺杂非晶氧化硅(a-SiO_x(Mo))物质的形成和机理.结果表明,在1500 K温度下, MoO_3/Si界面区由Mo, O, Si三种原子混合,可形成新的稳定的物相.热蒸发沉积初始时, MoO_3中的两个O原子和Si成键更加稳定,同时伴随着电子从Si到O的转移,钝化了硅表面的悬挂键. MoO_3中氧空位的形成能小于SiO_2中氧空位的形成能,使得O原子容易从MoO_3中迁移至Si衬底一侧,从而形成氧化硅层;替位缺陷中, Si替位MoO_3中的Mo的形成能远远大于Mo替位SiO_2中的Si的形成能,使得Mo容易掺杂进入氧化硅中.因此,在晶硅(100)面上沉积MoO_3薄膜时, MoO_3中的O原子先与Si成键,形成氧化硅层,随后部分Mo原子替位氧化硅中的Si原子,最终形成含有钼掺杂的非晶氧化硅层.