柱面微通道板的制备及其性能研究

针对未来空间天文学应用的超分辨率光谱成像仪器的需求，对低噪声柱面微通道板（MCP）的制备方法及其性能进行了研究. 提出了一种将光学抛光与热成型相结合的新的柱面MCP制备方法，利用不含放射性元素的低噪声MCP玻璃，制备出曲率半径为400mm、尺寸为30mm′46mm、长径比为80:1、通道直径12.5mm、通道间距15mm的柱面MCP，并将其与感应电荷楔条形阳极（WSA）组成光子计数探测器，对其暗计数率、分辨率进行了检测，暗计数率约为0.1counts/cm2×s.     

A High‐Efficiency All‐Fiber Laser Operated in High‐Order Mode using Ring‐Core Yb‐Doped Fiber

An all‐fiber laser generating a cylindrical vector beam is proposed and demonstrated using a home‐made ring‐core Yb‐doped fiber (RC‐YDF). In the RC‐YDF, not only annular doping but also ring‐type beam pump is realized. This is believed to be the first report describing the realization of annular doping and ring‐type beam pump in active fiber simultaneously, which can enhance the efficiency for high‐order mode oscillation. This laser operates in the high‐order mode stably with a slope efficiency of as high as 55.7%. Cylindrical vector modes can be obtained easily through adjusting the polarization controller. This work may have great potential for providing high‐efficiency and high‐power cylindrical vector beam and vortex beam sources.     

Effect of magnesium and titanium on the cathodic behaviour of aluminium in nitric acid

Cathodic polarization of aluminium and Al–0.18 wt.% Mg and Al–0.08 wt.% Ti alloys in 0.24 mol dm^?3 nitric acid solution at 38 °C has been employed to assist understanding of the roles of alloying elements in electrograining. The findings indicate that additions of magnesium and titanium to aluminium accelerate the corrosion of the substrate under the alkalization caused by the cathodic reactions. The accelerated dissolution and the consequent formation of hydrated alumina result in a decreased net cathodic current density in potentiostatic and potentiodynamic polarization conditions relative to the behaviour of aluminium. Copyright © 2014 John Wiley & Sons, Ltd.     

Direct Imaging of Octahedral Distortion in a Complex Molybdenum Vanadium Mixed Oxide

Complex Mo,V‐based mixed oxides that crystallize in the orthorhombic M1‐type structure are promising candidates for the selective oxidation of small alkanes. The oxygen sublattice of such a complex oxide has been studied by annular bright field scanning transmission electron microscopy. The recorded micrographs directly display the local distortion in the metal oxygen octahedra. From the degree of distortion we are able to draw conclusions on the distribution of oxidation states in the cation columns at different sites. The results are supported by X‐ray diffraction and electron paramagnetic resonance measurements that provide integral details about the crystal structure and spin coupling, respectively.     

局部载荷作用简支板屈曲分析

根据能量原理,引入大挠度Von-Karman方程,求解了应力不连续简支板的屈曲问题,得到了临界载荷和临界应力计算系数.     

正交复合材料面层夹层板非线性理论及应用

针对复合材料面层夹层板的构造和变形特点，考虑横向剪应力在面层和芯层粘结处的连续条件，应用Ｈａｍｉｌｔｏｎ原理建立了基于五个未知函数的正交铺设复合材料面层夹层板的非线性精化理论。对静力学问题，控制方程化简为由四个基本未知函数表述。文中还分析了简支正交铺设复合材料面层夹层板的非线性弯曲，给出了载荷—挠度特征关系和板中应力的分布状况。数值计算表明，夹层板面层和芯层粘结处的层间剪应力在工程设计中是十分重要的。     

用三维弹性力学方法研究圆板的稳定问题

用三维弹性力学方法研究任意边界条件圆板的轴对称稳定问题，利用Ｈ变换和Ｓｔｏｃｋｅｓ变换，导出位移函数及其偏导数的一种新型双重极数式，并由数学弹性定理论的基本方程和边界条件建立的特征方程，求得最小临界载荷的精确解，文末以简支圆板为例进行数字计算，结果表明：在弹性失稳范围内，三维弹性力学方法求得的临界载荷略低于经典理论的结果，对于薄板的弹性稳定问题，经典板理论有足够的精度。     

具有自由边的复合材料层合板的解析解

从三维弹性力学基本方程出发,通过假设自由边的边界位移函数,建立了正交异性层合板的状态方程,给出了对边自由,对边简支矩形板的解析解.此解满足层合板的基本方程和层间连续条件.用本文的方法比较容易处理层合板的自由边.算例表明,数值结果具有较高的精度.     

Condensation from steam—air mixtures in a horizontal annular flow channel

Experiments were performed on the condensation of steam from steam-air mixtures in annular flow at a cooled inner tube. The range of investigation was varied for laminar and turbulent flow for 1.5 × 10³ Re 1.3 × 10⁴ and inlet concentrations 0.59 p_steam/p_total 0.95. The measurements, performed at an open test loop at p_total ≈ 0.96 bar, allowed local heat and mass transfer coefficients to be evaluated for various inlet lengths in the 2 m long annulus. The steam concentration was measured locally inside the annulus with a newly developed dew-point probe. The heat flux was measured locally using the temperature gradient in the cooled inner tube.

Near the inlet region the experiments showed a slightly higher heat flux at the bottom of the tube compared to the top, although it is expected to be smaller there owing to a thicker liquid film. Far downstream from the inlet region the heat transfer at the top was higher than at the bottom. The reasons for these effects are discussed, yielding a better understanding of the thermal and fluid processes involved in condensation from vapor-gas mixtures. The measured data allow the development of correlations for predicting the local Nusselt and Sherwood numbers in a horizontal annular-flow chanbel.     

非均匀圆柱型正交各向异性圆板的弯曲

研究了非均匀圆柱型正交各向异性圆板在均布横向载荷作用下的弯曲问题，求得了折算刚度随半径按指数规律变化的非均匀圆柱型正交各向异性圆板弯曲问题的渐近解，给出了周边固支和简支条件下的渐近解．通过算例可以看出，这种非均匀性对圆板中心挠度的影响是显著的