Synthesis of novel hierarchical ZSM-5 monoliths and their application in trichloroethylene removal

A self-supporting ZSM-5 monolith with a hierarchical porosity was prepared using polyurethane foam (PUF) as a structural template and a hydrothermal synthesis procedure. The synthesized monolith was characterized and investigated towards the adsorption and catalytic oxidation of trichloroethylene (TCE). Adsorption of TCE was studied gravimetrically and oxidation of TCE was studied using a vapor-phase down-flow reactor. Monolithic ZSM-5 displayed good sorption properties and completely oxidized TCE. Conversion levels of 50% and 90% were achieved at reduced temperatures (by ~50 ℃) when compared with the conversion temperatures obtained from the powder counterparts. Besides the activity of the monolith towards TCE adsorption and oxidation, it was stable and enhanced diffusion, thereby reducing pressure drops to a great extent owing to its hierarchical porous nature.     

Biodegradation analyses of trichloroethylene (TCE) by bacteria and its use for biosensing of TCE

Trichloroethylene (TCE) is a toxic, recalcitrant groundwater pollutant. TCE-degrading microorganisms were isolated from various environments. The aerobic bacteria isolated from toluene- and tryptophan-containing media were Pseudomonas sp. strain ASA86 and Burkholderia sp. strain TAM17, respectively; these are necessary for inducing TCE biodegradation in a selective medium. The half-degradation time of TCE to a concentration of 1 mg/L was 18 h for strain ASA86 and 7 days for strain TAM17. While identifying toluene/TCE degradation genes, we found that in strain ASA86, the gene was the same as the todC1 gene product encoding toluene dioxygenase identified in Pseudomonas putida F1, and that in strain TAM17, the gene was similar to the tecA1 gene product encoding chlorobenzene dioxygenase identified in Burkholderia sp. PS12. A novel TCE biosensor was developed using strain ASA86 as the inducer of toluene under aerobic conditions. The TCE biosensor exhibited a linear relationship below 3 ppm TCE. Detection limit of the biosensor was 0.05 ppm TCE. The response time of the biosensor was less than 10 min. The biosensor response displayed a constant level during a 2 day period. The TCE biosensor displayed sufficient sensitivity for monitoring TCE in environmental systems.     

Effect of biotransformation on multispecies plume evolution and natural attenuation

Biological transformation of volatile organic compounds is one of the key factors that influence contaminant-plume evolution and thus natural attenuation. In this study we investigate the effect of biological transformation on the transport of contaminants in the aqueous and gaseous phases. The analysis includes the study of the effect of density-driven advection of contaminants in the gaseous phase on multiphase and multispecies flow, fate and transport modeling in the subsurface. Trichloroethylene (TCE) and its two byproducts, dichloroethylene and vinyl chloride, are analyzed as the target contaminants. Our results indicate that density-driven advection of the gaseous phase, which is initiated by evaporation of TCE as a nonaqueous phase liquid, increases the downward and also the lateral migration of TCE within the unsaturated zone. This process also influences the location of high-concentration zones of the byproducts of TCE in the unsaturated and the saturated zones. Biotransformation of TCE contributes to the reduction of dissolved TCE plume development as expected. The daughter byproducts, which are introduced into the subsurface system, show distinct transport patterns as they are affected by their independent degradation kinetics and density-driven advection. These observations, which are based on our simulation results for biotransformation and transport of TCE and its byproducts, are useful in evaluating the natural attenuation processes, its potential health hazards and also the evaluation of potential plume development at contaminated sites.     

Photooxidation of aqueous trichloroethylene using a buoyant photocatalyst with reaction progress monitored via micro-headspace GC/MS

Although photooxidation has previously been shown to be successful in removing organic contaminants from water, methods combining the rapid photooxidation of the desired contaminant with easy catalyst manipulation and removal are few and far between. In the absence of an easy means of catalyst removal, the photooxidation process becomes more costly and time consuming, and photocatalysis cannot be employed as an in situ method for the remediation of aqueous organic contaminants. In this study, the photocatalyst was added to an aqueous trichloroethylene (TCE) solution in the form of TiO₂-coated buoyant microspheres. The solution, placed in a flow-cell photoreactor along with the buoyant catalyst, was irradiated with a UV-filtered Xenon light source. Limited sample sizes necessitated the development of a low-cost headspace GC/MS analysis method, utilizing a standard direct-injection autosampler. This analytical technique aptly monitored reaction progress and indicated that aqueous TCE concentration decreases by nearly 90% in the first hour of irradiation. Subsequent solvent extraction GC/MS analysis indicated that the TCE is initially sorbed by the photocatalyst spheres, but as irradiation continued, TCE is removed from the catalyst spheres surfaces. During the course of irradiation, the expected TCE mineralization product hydrochloric acid appeared, as indicated by a decrease in pH and ion chromatography analysis. The microsphere-born catalyst was easily removed from the treated solution by filtration. Thus, it is possible that a method for effective, low-cost in situ photooxidation of aqueous organic contaminants will be realized in the near future.     

Solvent effects in the fluorination of 1,2-dichloro-1,1-difluoroethane (R-132b) to 2-chloro-1,1,1-trifluoroethane (R-133a)

Trichloroethylene has been found to act as a rate enhancing co-factor in the liquid phase, tantalum (V) halide catalyzed, fluorine-for-chlorine exchange reaction of 1,2-dichloro-1,1-difluoroethane (R-132b) to 2-chloro-1,1,1-trifluorethane (R-133a). Several trifluoromethyl substituted benzenes have also been found to be rate-enhancing solvents.     

Catalytic Oxidation of Trichloroethylene over RuO2 Supported on Ceria-zirconia Mixed Oxide

Ru/Ce-Zr catalysts were prepared by impregnation of Ru on the hydrothermally synthesized Ce-Zr mixed oxide with different molar ratio of Ce/Zr.The resultant products were systematically characterized by inductively coupled plasma(ICP),X-ray diffraction(XRD),scanning electron microscopy(SEM)/energy dispersive spectrometry(EDS),H2-temperature programmed reduction(H2-TPR),NH3-temperature programmed desorption(NH3-TPD)and X-ray photoelectron spectroscopy(XPS).It was proved by H2-TPR and NH3-TPD that the introduction of Ru can improve the activity of oxygen of catalysts and the presence of Zr contributes to the increments of acid properties of catalysts.When the molar ratio of Ce-Zr was 8:4,the quantity of Ru was 0.9%(mass ratio),and the calcined temperature of catalysts was at 400℃,the removal rate of 90% for trichloroethylene(TCE)was reached at 250℃ for 5360 mg/m^3 TCE and the stability of the catalysts was investigated under the condition.The results showed that the high removal rate can be maintained for at least 90 h,which is promising for industrial application.     

同位素稀释超高效液相色谱串联质谱测定尿液中苯系物和三氯乙烯代谢产物

建立同位素内标稀释,超高效液相色谱串联质谱(Uhra performance liquid chromatography-tandem mass sepctrometry,UPLC-MS/MS)同时测定尿中苯系物和三氯乙烯代谢产物的方法,并用于孕妇尿样的分析.尿样过经含同位素内标的醋酸铵缓冲液稀释10倍后,过滤,取滤液进样分析.采用C18色谱柱,梯度洗脱进行UPLC分离,电喷雾负离子扫描多反应监测(Multiple reaction monitoring,MRM)模式检测.方法检出限在0.0350～ 1.75 μg/L之间,方法的日内和日间精密度分别为1.2％～9.1％和2.0％～9.7％;用所建立的方法测定了650个孕妇尿液样品,并统计分析了其地区差异,加标回收率为85.0％～104％.所建立的方法快速灵敏,适合尿液样品的批量分析.     

Direct Mass Spectrometric Study of the Ionic Species Content of a C<Subscript>2</Subscript>HCl<Subscript>3</Subscript>/He/O<Subscript>2</Subscript> Microwave Discharge Plasma

Direct on-line studies of a C₂HCl₃/He/O₂ microwave discharge plasma made possible the evolution and detection of many unfamiliar ionic species. Numerous ionic chlorocarbons, chlorohydrocarbons, oxygenated chlorohydrocarbons, oxygenated hydrocarbon radicals, and simple hydrocarbon species were identified mass spectrometrically as by-products: C _m Cl _n (m = 1–4, 6, 8; n = 1–8), C _m H _n Cl _x (m = 1–4, 6, 7, 10; n, x = 1–6), C _m H _n Cl _x O _y (m = 1–5, 12; n = 1–7; x = 1, 2, 4, 6; y = 1–3), C _n H_2n−1O (n = 2, 3), C _m H _n (m = 2, 4, 6, 8; n = 2, 4), and so on. The studies clearly showed the presence of various unfamiliar positive ionic O-containing species such as C₂ClO₂, CCl₃CO, C₂H₂Cl₄O₂, and C₄H₂Cl₆O₃. It is apparent that positive-ion reactions play a significant role in producing many ionic species in the chemistry of C₂HCl₃ plasmas.     

Study on the active sites of Cu-ZSM-5 in trichloroethylene catalytic combustion with air

The catalytic activity of Cu-ZSM-5 in trichloroethylene （TCE） combustion increases with the increasing skeletal Cu amount and however decreases with the increase of surface amorphous CuO, which is detected by infrared spectroscopy （IR） and diffuse reflectance ultraviolet-visible spectroscopy （DRS-UV-vis）, therefore the skeletal Cu species are concluded to be the active sites for the TCE combustion.     

Synthesis of freestanding silica and titania-silica aerogels with ordered and disordered mesopores

Freestanding blocks of silica and titania-silica aerogels were prepared by the sol-gel method. It is possible to prepare crack-free, titania-silica aerogels with high titanium content by a careful control of the synthesis conditions. Prehydrolysis, complexation and polymer addition were used to adjust the hydrolysis and condensation rates of the silicon and titanium alkoxide precursors. Photoactive anatase TiO₂ nanocrystals with a large surface area (i.e., up to 300m²g⁻¹) were crystallized from the gel network by the high-temperature ethanol supercritical drying, and the resulting aerogel blocks were gas permeable and display a transition-regime diffusion behavior. Pore and volume shrinkages were observed in samples prepared by ethanol supercritical drying when the titanium content was increased resulting in a lower flux. Adding Pluronic P123 creates ordered mesopore domains and produces large pore aerogels even at high titanium contents. The photocatalytic oxidation reaction of trichloroethylene was performed by flowing the reactant gas mixture through the UV-irradiated aerogel blocks with excellent results.