光子晶体光纤温度压力传感器

提出了一种在高温环境下同时测量温度和气压的光子晶体光纤温度压力传感器.在普通单模光纤和光子晶体光纤之间熔接一段空心光纤构成干涉结构.空心光纤段构成非本征法布里-珀罗干涉仪,利用光子晶体光纤的微孔与外界相通,通过气体折射率变化来测量环境中的气压变化;光子晶体光纤段构成本征法布里-珀罗干涉仪,利用热膨胀效应和热光效应来测量环境中的温度.传感器的解调通过自制的白光干涉解调仪实现,实验通过测量腔长得到被测环境的温度和气压.在不同温度和气压环境下,对腔长分别为306μm和1535μm的温度压力光纤传感器进行连续测量.实验结果表明,传感器能够在28~800℃的温度下和0~10 MPa的气压下稳定工作,测量范围内温度灵敏度可达17.4 nm/℃,压力灵敏度随温度增加而降低,在28℃时可达1460.5 nm/MPa.     

Using a Novel and Easy-to-Use Sandwich Structure Device to Evaluate the Cooling Properties of Cool Materials

A number of cool materials have been designed and used in hot weather to minimize the heat coming from sunlight. Traditionally, solar reflectance and infrared emittance were measured to characterize the cooling properties of cool materials. However, these methods could represent the cooling property only indirectly. In this work, a sandwich structure device that can straightforwardly measure the cooling properties of cool materials was designed. Two cool materials, including high-density polyethylene (HDPE) and polyvinyl chloride (PVC), were selected to verify the device. For the purpose of comparison, UV-vis-NIR spectral characterization was also used to evaluate the cooling properties of the selected materials. The results, especially for the HDPE/Green 260 composite sample, which presents much lower solar reflectance but better cooling property, indicated that the cooling properties cannot be entirely represented by only the reflectance or transmittance, and the sandwich structure device was able to make up for this deficiency.     

Change of evaporation rate of single monocomponent droplet with temperature using time-resolved phase rainbow refractometry

Droplet evaporation characterization, although of great significance, is still challenging. The recently developed phase rainbow refractometry (PRR) is proposed as an approach to measuring the droplet temperature, size as well as evaporation rate simultaneously, and is applied to a single flowing n-heptane droplet produced by a droplet-on-demand generator. The changes of droplet temperature and evaporation rate after a transient spark heating are reflected in the time-resolved PRR image. Results show that droplet evaporation rate increases with temperature, from ?1.28$\times {10}^{?8}$ m²/s at atmospheric 293 K to a range of (?1.5, ?8)$\times {10}^{?8}$ m²/s when heated to (294, 315) K, agreeing well with the Maxwell and Stefan–Fuchs model predictions. Uncertainty analysis suggests that the main source is the indeterminate gradient inside droplet, resulting in an underestimation of droplet temperature and evaporation rate. With the demonstration on simultaneous measurements of droplet refractive index as well as droplet transient and local evaporation rate in this work, PRR is a promising tool to investigate single droplet evaporation in real engine conditions.     

Characteristic material parameters of CIGS solar cell related with device performance

CIGS solar cells with power conversion efficiency (PCE) in the range of 1.82%–12.30% were obtained by using two-step process, and were further analyzed through various measurement techniques. Material parameters showed diverse values and some trends depending on the device performance. The lower performance device showed small integrated PL intensity, short minority life time, larger defect density and lower activation energy, whereas the higher performance device showed opposite values. We investigated relationship between material parameters and PCE of solar cells, and found that some physical parameters such as integrated PL intensity, minority life time, defect density, and difference between band gap and activation energy (E_g-E_a), which all reflect defect states in bulk and at pn interface, are strongly related with PCE and would be used as a good indicator to evaluate device performance quickly.     

Multiplasmid DNA in agarose gel electrophoresis: Suitable dye and temperature is essential for prominent profiles

Nucleic acids dye Goldview is widely used in agarose gel electrophoresis (AGE). However, in this study, a sample of multiplasmid DNA (multi-pDNA) stained with Goldview analyzed by AGE showed its instability at low temperature. Three types of DNA samples were analyzed, including linear DNA (ladder), single-plasmid DNA (single-pDNA), and multi-pDNA, electrophoretic conditions were optimized by adjusting the dye, the buffer, and the temperature (1–50°C). The results showed that the light intensity of Gelred is 2.2-times higher than that of Goldview in staining multi-pDNA. Compared with the single-pDNA and the linear DNA, the multi-pDNA stained with Goldview was greatly affected by temperature. This short communication indicated that Gelred is a highly applicable dye for analyzing multiplasmid samples. The degree and the way of binding of Goldview to multi-pDNA are greatly affected by temperature.     

Thermal measurements using ultrasonic acoustical pyrometry

Reflections from geometric discontinuities can be used with ultrasonic energy to predict the temperature of an interface where classical temperature measurement techniques are impractical because of physical access limitations or harsh environmental conditions. Additionally, these same ultrasonic measurements can be used with inversion methods commonly applied to ill-posed heat transfer problems to increase the accuracy of the measurement of surface temperature or heat flux at the surface of interest. Both methods for determining surface temperature are presented, along with a comparison of results both from a verification example and using data gathered in a field test of the methods. The results obtained with these two methods are shown to be in good agreement with an empirical relationship used in the design of large caliber guns.     

Enrichment of adenosine using thermally responsive chromatographic materials under friendly pH conditions

A thermally responsive boronate affinity chromatographic material, which showed thermal sensitivity, had been successfully applied for the enrichment and separation of cis‐diol‐containing compounds, and the capture and release process could be facilitated by adjusting the temperature. However, in this system, the pH of the mobile phase must be higher than 9.8, and alkaline media can lead to the degradation of labile compounds; the use of silica beads also limits its use. In this study, thermally responsive boronate affinity chromatographic material, namely poly(N‐isopropylacrylamide‐co‐N‐acryloyl‐3‐aminophenylboronic acid) grafted silica, was successfully prepared by atom transfer radical polymerization. Its structure was confirmed by IR spectroscopy and the graft ratio was 20.8%, determined by thermogravimetric analysis. Furthermore, the capture/release of adenosine, a cis‐diol, was performed from pH 5.0–9.0 and 10–50°C. The elution of adenosine was remarkably retarded at decreased temperatures and adenosine could be captured completely at 10°C at pH values of 5.0–9.0. The enrichment of adenosine could be achieved by simply changing the temperature from 10 to 50°C. Therefore, this material not only improved the stability of the silica, but was also suitable for the capture of oxidation‐sensitive biological analytes. Moreover, it could be used for the enrichment of cis‐diol‐containing compounds in LC with MS.     

Amperometric Detection of Ethanol Vapors by Screen Printed Electrodes Modified by Paper Crowns Soaked with Room Temperature Ionic Liquids

A convenient assembly recently proposed for screen printed gold electrodes (SPEs) suitable for measurements in gaseous samples is here tested for the analysis of the ethanol content in alcoholic drinks. This assembly involves the use of a circular crown of filter paper, soaked in the room temperature ionic liquid (RTIL) 1-butyl-3-methylimidazolium hydrogen sulfate, which is simply placed upon a disposable screen printed cell, so as to contact the outer edge of the gold disc working electrode, as well as peripheral counter and reference electrodes. The electrical contact between the paper crown soaked in RTIL and the SPE electrode is assured by a gasket and all components are installed in a polylactic acid holder. This assembly provides a portable and disposable electrochemical platform, assembled by the easy immobilization onto a porous and inexpensive supporting material such as paper of a RTIL characterized by profitable electrical conductivity and negligible vapor pressure. The electroanalytical performance of this device was assayed for the flow injection analysis of the ethanol concentration in some real samples of wine and beer and the results obtained are compared with the alcoholic degree reported in the relevant bottle-labels, thus highlighting a substantially satisfactory agreement. Repeatable sharp peaks (RSD=6–8 %) were detected for ethanol over a wide linear range (1–20 % v/v in water) and a detection and quantitation limit of 0.55 % v/v and 1.60 % v/v were inferred for a signal-to-noise ratio of 3 and 10, respectively.     

Cobalt ferrite for direct cracking of methane to produce hydrogen and carbon nanostructure: Effect of temperature and methane flow rate

Cobalt ferrite (CoFe₂O₄) was used as a catalyst for direct methane cracking. The reaction was accomplished in a fixed bed reactor at normal atmospheric pressure, while gas flow rate (20–50 mL/min) and reaction temperature (800–900 °C) were varied. The fresh CoFe₂O₄ morphology is sponge-like particle with inverse spinel structure as revealed from SEM and XRD results. The methane conversions and hydrogen formation rate were increased with reaction temperature, while catalyst stability and induction period decreased. Increases of gas flow rate > 20 mL/min led to a decrease the overall catalytic activity of CoFe₂O₄ for methane cracking. The XRD results of spent catalysts revealed that CoFe alloy was the active phase of methane cracking. TGA analysis showed that the largest amount of deposited carbon was 70.46 % at (20 mL/min, 900 °C), where it was 34.40 % at (50 mL/min, 800 °C). The deposited carbon has the shape of spherical carbon nanostructures and/or nano sprouts as observed with SEM. Raman data confirmed the graphitization type of the deposited carbon.     

Minimizing Temperature Bias through Reliable Temperature Determination in Gas-Solid Photothermal Catalytic Reactions

Enormous advances in photothermal catalysis have been made over the years, whereas the temperature assessment still remains controversial in the majority of photothermal catalytic systems. Herein, we methodically uncovered the phenomenon of temperature determination bias arising from prominent temperature differences in gas-solid photothermal catalytic systems, which extensively existed yet has been overlooked in most relevant cases. To avoid the interference of temperature bias, we developed a universal protocol for reliable temperature evaluation of gas-solid photothermal catalytic reactions, with emphasis on eliminating the temperature gradient and temperature fluctuation of catalyst layer via optimizing the reaction system. This work presents a functional and credible practice for temperature detection, calling attention to addressing the effects of temperature differences, and reassessing the actual temperature-based performances in gas-solid photothermal catalysis.