改进的种子聚合——单分散交联聚苯乙烯微球的合成

本文结合了种子聚合法和二步溶胀法的特点,提出用改进的种子聚合法以合成粒径大于3微米、粒度呈单分散的交联聚苯乙烯微球。文中采用的粒径为1—2微米的聚苯乙烯胶乳种子是由无皂乳液聚合法制备的。文章研究了溶胀温度、溶胀剂比例、溶胀时间、交联剂、小分子化合物及表面活性剂等因素对生成微球的粒径和分散性的影响。     

烷基硫酸钠对MMA种子乳液聚合的影响

研究了烷基硫酸钠纯度，烷基碳链分布对甲基丙烯酸甲酯种子乳液聚合反应的影响。结果表明，烷基硫酸钠中乙醇不溶物含量的增加，可提高ＭＭＡ乳液聚合反应速度，在采用Ｋ２Ｓ２Ｏ８－ＮａＨＳＯ３－Ｃｕ＾２＋三元氧化－还原引发体系的ＭＭＡ乳液聚合中，Ｆｅ＾２＋降低反应速率，而Ｆｅ＾３＋则提高聚合反应速率；     

臭椿籽挥发油的化学成分分析

采用水蒸气蒸馏法对甘肃天水产的臭椿籽挥发油进行提取，挥发油得率约为2．1％(w)；用气相色谱-质谱联用技术对挥发性成分进行了分析，鉴定了43个化合物，占挥发油相对含量的96．3％；主要成分为脂肪酸及酯、脂肪烃及甾族化合物，其中含量较高的有亚油酸、油酸、蓖麻酸和蓖麻酸甲酯。     

Ocimum basilicum seed mucilage reinforced with montmorillonite for preparation of bionanocomposite film for food packaging applications

Use of nanocomposites is a well-established approach in enhancing the mechanical and barrier properties of bionanocomposite film for food packaging applications. The seed mucilage of Ocimum basilicum was employed for the preparation of bionanocomposite films with montmorillonite (MMT) as nanofiller. The films were prepared by solvent-casting method at varied solution pH (1, 3, 5 and 9) and MMT loading (1%, 3%, 5%, 10%, 15% and 20%). The films were characterized for physical, mechanical and barrier properties in addition to microstructure and X-ray diffraction pattern. XRD analysis revealed the exfoliated dispersion of MMT at pH 9, confirming its effective interaction with the bionanocomposite film. Maximum film tensile strength was achieved at a lower MMT load of 5%. Water vapour permeability reduced with increase in MMT loading up to 5%, followed by an increase at higher MMT loadings. Film formed at pH 9 showed tensile strength of 17.3 ± 0.33 MPa and reduced water vapour permeability (WVP) of 0.21 g mm.m⁻².hr⁻¹.kPa⁻¹.     

NaN_3对玉米萌发过程中超弱光子辐射的影响

为了解读植物种子萌发过程中超弱光子辐射信息的生物学意义,采用呼吸抑制剂NaN3处理萌发玉米种子,跟踪测量和分析了玉米种子萌发过程中超弱光子辐射中自发光子辐射和外界光诱导的延迟光子辐射的变化规律,同时研究了萌发玉米种子鲜质量的变化.结果发现,NaN3同步抑制了萌发玉米自发光子辐射和鲜质量的增长,造成萌发玉米延迟光子辐射的初始光子数和延迟光子辐射积分强度大幅度降低,相干时间减小.机理分析表明,NaN3对呼吸代谢电子传递链的抑制造成的自由基反应减弱是萌发玉米自发光子辐射减小的原因,自发光子辐射强度可以作为玉米萌发状态的信号,延迟光子辐射动力学参数的大小可以表征萌发玉米呼吸代谢的强弱,相干时间是种子细胞组织序性的量度,通过对萌发种子超弱光子辐射的采集和分析可以实现对萌发种子细胞代谢和功能状态变化的灵敏和无损检测.     

Recent advances in biodegradable matrices for active ingredient release in crop protection: Towards attaining sustainability in agriculture

Climate changes, emerging species of plant pests, and deficits of clean water and arable land have made availability of food to the ever-increasing global population a challenge. Excessive use of synthetic pesticides to meet ever-increasing production needs has resulted in development of resistance in pest populations, as well as significant ecotoxicity, which has directly and indirectly impacted all life-forms on earth. To meet the goal of providing safe, sufficient, and high-quality food globally with minimal environmental impact, one strategy is to focus on targeted delivery of pesticides using eco-friendly and biodegradable carriers that are derived from naturally available materials. Herein, we discuss some of the recent approaches to use biodegradable matrices in crop protection, while exploring their design and efficiency. We summarize by discussing associated challenges with the existing approaches and future trends that can lead the world to more sustainable agricultural practices.     

Effect of material selection and background impurity on interface property and resulted CIP-GMR performance

In this paper, we investigated the effect of background base pressure, wafer-transferring time between process modules, and stack layer material selection on the current-in-plane giant magneto-resistive (CIP-GMR) interface properties and the resulted CIP-GMR performance. Experimental results showed that seed layer/AFM interface, AFM/pinned layer (PL) interface, pinned layer/Ru interface, and reference layer (RL)/Cu spacer interface are among the most critical ones for a CIP-GMR device. By reducing the background impurity level (water moisture and oxygen), optimizing the wafer process flow sequence, and careful stack-layer material selection, such critical interfaces in a CIP-GMR device can be preserved. Consequently, a much robust GMR performance control can be achieved.     

Crystal growth and dielectric, mechanical, electrical and ferroelectric characterization of n-bromo succinimide doped triglycine sulphate crystals

Single crystals of triglycine sulphate (TGS) doped with n-bromo succinimide (NBS) were grown at ambient temperature by the slow evaporation technique. An aqueous solution containing 1-20 mol% of n-bromo succinimide as dopant was used for the growth of NBSTGS crystals. The incorporation of NBS in TGS crystals has been qualitatively confirmed by FTIR spectral data. The effect of the dopant on morphology and crystal properties was investigated. The cell parameters of the doped crystal were determined by the powder X-ray diffraction technique. The dielectric constant of NBS doped TGS crystal was calculated along the ferroelectric direction over the temperature range of 30-60 °C. The dielectric constant of NBSTGS crystals decrease with the increase in NBS concentration and considerable shift in the phase transition temperature (T_C) towards the higher temperature observed. Pyroelectric studies on doped TGS were carried out to determine the pyroelectric coefficient. The emergence of internal bias field due to doping was studied by collecting P-E hysteresis data. Temperature dependence of DC conductivity of the doped crystals was studied and gradual increase in the conductivity with the increase of dopant concentration was observed. The activation energy (ΔE) calculated was found to be lower in both the ferroelectric and the paraelectric phases for doped crystals compared to that of pure TGS. The micro-hardness studies were carried out at room temperature on thin plates cut perpendicular to the b-axis. Less doped TGS crystals show higher hardness values compared to pure TGS. Piezoelectric measurements were also carried out on 010 plates of doped TGS crystals at room temperature.     

Surface potential driven dissolution phenomena of [0 0 0 1]-oriented ZnO nanorods grown from ZnO and Pt seed layers

Highly oriented ZnO nanorods are synthesized hydrothermally on ZnO and Pt seed layers, and they are dissolved in KOH solution. The rods grown on ZnO seed layer show uniform dissolution, but those grown on Pt seed layer are rod-selectively dissolved. The ZnO nanorods from both seed layers show the same crystalline structure through XRD and Raman spectrometer data. However, the surface potential analysis reveals big difference for ZnO and Pt seed cases. The surface potential distribution is very uniform for the ZnO seed case, but it is much fluctuated on the Pt seed case. It suggests that the rod-selective dissolution phenomena on Pt seed case are likely due to the surface energy difference.