A study on the triboelectric charging of display glass during the roller transfer process–modeling and characterization

Glass substrates for displays are insulating materials capable of generating and maintaining high levels of triboelectric charges posing a risk of electrostatic discharge (ESD) damage to electronic display components. In this work, an apparatus for triboelectric charging characterization of display glass during the roller transfer process was designed and fabricated. In order to establish the reliability of the characterization, the triboelectric charge and the electrostatic potential distribution measurement system was automated. The preconditioning process of the glass and the rollers was also addressed. In order to analyze the measurements' results, a multiphysics model that considered both electrical and mechanical properties was proposed. The test parameters that were expected to affect the triboelectric charging characteristics are defined and discussed, as well as some of the characterization results such as the effects of acceleration/deceleration and maximum velocity, relative humidity and moisture on the glass and the rollers, and the conductivity of the rollers. The peak-to-peak deviation of the de-embedded triboelectric charges, due to a steady-state velocity period with different combinations of acceleration/deceleration and maximum velocities, was 14.2%. The triboelectric charges increased as the relative humidity increased from 30% to 50% with the same temperature. They also increased when the insulating rollers were replaced with dissipative rollers.     

Dry modification of electrode materials by roller vibration milling at room temperature

For the first time dry roller vibration milling at room temperature was used to prepare active carbon （AC） nano-particles and to modify MnO2 powder as electrode materials. In 30 min AC was milled to a mean particle size of 30-50 nm with increased crystallinity and higher specific surface area, predominantly mesoporous and with improved pore diameter distribution. Then, AC nano-particles were incorporated with MnO2 or bismuth-doped MnO2 nano-particles synthesized by sol-gel methods to prepare nano-composite electrode materials for studying their electrochemical performance. The AC nano-particles combined with 10 wt.% bismuth-doped MnO2 nano-particles were found to possess excellent electrochemical property with specific capacitance up to 308 F/g and without obvious attenuation with increasing current. Our method seems to ooen a new way to imorove AC based electrode materials used for clean energy such as suner capacitors.     

辊型CCD检测法中轧辊轴线偏移的补偿

根据激光线阵CCD检测技术原理,提出一种快速、高准确度的轧辊辊型检测方法,阐述了系统组成与检测过程.针对辊型检测过程中易出现的轴线偏移现象,从垂直检测平面和平行检测平面两个方向采取补偿措施,有效地提高了系统检测准确度.同时检测系统对CCD信号进行处理时,采用浮动阈值法,有效降低噪音对CCD成像质量的影响,保证了系统的分辨率与检测准确度.实验证明,系统的检测准确度可达到实际生产过程中辊型检测的要求,为实现辊型在线检测的高速、高准确度、高自动化提供了一种新的研究方法.     

Improved oxygen delivery in a continuous-roller-bottle reactor

Variations to the original aeration system in a continuous roller bottle reactor of novel design have been tested and compared for optimal oxygen (O) delivery. Reactor operating parameters that affect O transfer are rotation rate, liquid-volume level, fresh-feed rate, and supplementary-aeration rate. Design modifications to enhance gas-liquid O transfer include the addition of wall baffles and center baffles. The number and location of each of these baffles are compared for their effect on k_La values in the reaction chamber. The liquid feed into the system has been modified to improve the axial liquid mixing and O transfer.     

辊型CCD检测法中轧辊轴线偏移的补偿

根据激光线阵CCD检测技术原理,提出一种快速、高准确度的轧辊辊型检测方法,阐述了系统组成与检测过程.针对辊型检测过程中易出现的轴线偏移现象,从垂直检测平面和平行检测平面两个方向采取补偿措施,有效地提高了系统检测准确度,同时检测系统对CCD信号进行处理时,采用浮动阈值法,有效降低噪音对CCD成像质量的影响,保证了系统的分...     

Nonlinear analysis of residual stresses in a rail manufacturing process by FEM

The aim of this paper is to study the residual stresses in an UIC-60 rail and their reduction by means of roller straightening. Both experimental and numerical investigations have been carried out in the past to reveal the formation of dominant longitudinal residual stresses. However, the agreement between both investigations was not particularly good. The finite element method (FEM) has also been used to simulate one, two and three-dimensional analyses of a rail during roller straightening processes. The present model considers the longitudinal movement of a rail through the straightening machine, contact conditions between rail and rollers and kinematic hardening so as to take into account the plastic behaviour of the rail material (steel). These results were compared with the experimental investigations and good agreement was observed. In this respect, this paper presents a novel, more realistic numerical simulation by FEM for the roller straightening process. Finally, an improvement of the straightening process in order to obtain smaller residual stress in the rail section is proposed.     

黑色签字笔墨水的NIR FT-Raman光谱法研究

本文首次采用近红外傅里叶变换位曼（NIR FT-Raman）光谱技术测定了36种黑色签字笔墨迹的拉曼谱。据拉曼的基团振动峰可将36种签字笔墨迹分为10大类,并对它们的谱图进行了分析。同时考察了基体（书写所用的纸张）、湿度、样品的测定功率以及书写时间对谱图的影响,尤其是第四项显示了与相对书写时间的关系。该方法快速、简便、灵敏度高、不需对样品进行分离提取。     

“FLUID ROLLER BEARING” EFFECT AND FLOW CONTROL

Owing to the rapid development of smart materials, flow control by travelling waves (TW) produced on flexible skin is becoming a very promising new area of research. One of the most revolutionary concepts of using TW technique is to trap a row of controllable vortices over the body surface, which plays a role of “fluid roller bearing” (FRB) between the external flow and the solid wall. The FRB can replace the conventional boundary layer and hence remove the latter‘‘s various unfavorable effects. This paper reports our preliminary numerical study of the FRB effect on flow over several typical walls, especially an airfoil with FRB at the stall angle of attack, which has never been considered before. Significant improvement of aerodynamic performance on the FRB-airfoil is observed, which strongly suggests that the FRB effect may open a brand new avenue to the 21th-Century aerodynamics.     

Breaking bore: Physical observations of roller characteristics

In an estuary, a tidal bore is a hydraulic jump in translation generated at the leading edge of the flood tide during the early flood tide under spring macrotidal conditions in a narrow funnelled channel. After formation, the bore is traditionally analysed as a hydraulic jump in translation and its leading edge is characterised by a breaking roller for Fr₁ > 1.3–1.5. Herein new unsteady experiments were conducted to investigate in details the upstream propagation of breaking bore roller. The toe perimeter shape fluctuated rapidly with transverse distance and time. A characteristic transverse wave length of the toe perimeter was observed. Both the standard deviation of toe perimeter location and characteristic transverse wave length were comparable to field observations. The celerity of the roller toe fluctuated rapidly with time and space. The instantaneous longitudinal profile of the roller free-surface showed significant temporal and spatial fluctuations. Although the bore propagation may be analysed in an integral form in first approximation, the rapid fluctuations in roller toe perimeter and free-surface profiles indicated a strongly three-dimensional turbulent flow motion.