爆炸容器内冲击波系演化及壳体响应的数值研究

对中心装药爆炸后冲击波的产生、传播和壳体动态响应全过程进行了数值研究。认为RDX瞬时爆炸 ,爆炸近场采用自相似解 ;冲击波传播和波系演化采用PPM (the Piecewise Parabolic Method)格式求解Eu ler方程 ;壳体响应采用有限元方法求解拉氏坐标系下由虚功原理得到的动力学方程。壳体内壁面边界条件分别采用强耦合和弱耦合方法处理。结果表明 :(1)当装药量相同时 ,薄壁壳体振型比厚壁壳体复杂得多 ,振幅也大 ;(2 )当装药量不同 ,壳体厚度相同时 ,爆炸场冲击波的演化过程不同 ;(3)对少量装药 ,产生的冲击波强度低 ,壳体变形小 ,是否考虑内边界运动 ,对计算结果的影响不大 ;(4 )在本文条件下 ,爆炸容器封头顶点所受的载荷最大 ,是最易发生破坏的地方 ,侧壁与爆点所在横截面的交线 ,也易破坏。     

Mie-Grneisen状态方程可压缩多流体流动的PPM方法

采用流体体积分数的混合型多流体数值模型，将piecewise parabolic method (PPM)方法应用于可压缩多流体流动的数值模拟，拓展了以前提出的模型和数值方法，使它能够处理一般的Mie-Grneisen状态方程。采用双波近似和两层迭代算法求解一般状态方程的Riemann问题；并根据多流体接触界面无振荡原则设计高精度计算格式，对典型的纯界面平移问题可以从理论上证明本算法在接触间断附近压力和速度没有振荡，而且数值模拟结果表明界面数值耗散也被控制在2~3个网格之内。模拟了多种复杂的可压缩多流体流动，算例结果表明本文方法可以有效地处理接触间断、激波等物理问题，且具有耗散小精度高的特点。     

Synthesis of 2,2′-bipyrrole-5-carboxaldehydes and their application in the synthesis of B-ring functionalized prodiginines and tambjamines

Facile, versatile, and cost-effective synthetic routes for the preparation of a range of new 3-alkyl-, 4-alkyl-, 3,4-dialkyl-, and 3-halo-4-alkyl-2,2′-bipyrrole-5-carboxaldehydes have been developed. These 2,2′-bipyrrole-5-carboxaldehydes offer interesting potential as building blocks for making bioactive natural and unnatural products, as demonstrated by the synthesis of B-ring functionalized prodiginines (PGs) and tambjamines.     

Hepatic lipid composition analysis using 3.0-T MR spectroscopy in a steatotic rat model

Purpose

To investigate the feasibility of in vivo assessment of hepatic lipid composition using 3.0-T proton magnetic resonance spectroscopy (¹H-MRS) in a steatotic rat model and compare it to histopathological and biochemical assessment.

Materials and Methods

Hepatic steatosis was induced by feeding rats with a methionine/choline-deficient (MCD) diet for 1, 2, 3, 5 or 7 weeks (n=5 per group). At the end of the diet period, ¹H-MRS of the liver was performed, and rats were sacrificed for histopathological and biochemical assessment of the liver. Spectra were acquired in a single voxel (1.2 cc) using a point-resolved spectroscopic sequence with TE/TR=35/2000 ms and 64 signal acquisitions. From the MR spectra, peak area ratios were calculated to estimate hepatic lipid composition.

Results

During MCD diet periods, hepatic steatosis significantly increased on histopathology (P<.001). The ¹H-MRS measurements of total hepatic fat content [1.3/(1.3+4.65) ppm] correlated strongly with histological macrovesicular hepatic steatosis (r=0.93, P<.001) and with the biochemical total hepatic fatty acids (r=0.94, P<.001). Total unsaturated fatty acids [TUFA, 5.4/(1.3+4.65) ppm] estimated with ¹H-MRS strongly correlated with the biochemical unsaturated fatty acids (r=0.90, P<.001). Polyunsaturated fatty acids [PUFA, 2.8/(1.3+4.65) ppm] estimated with ¹H-MRS strongly correlated with biochemical PUFA (r=0.91, P<.001). The proportion of total unsaturated fatty acids relative to the amount of total fatty acids (rTUFA, 5.4/1.3ppm) measured with ¹H-MRS strongly correlated with the biochemical amount of unsaturated relative to total hepatic fatty acids (r=0.81, P<.001). The proportion of PUFA relative to the amount of total fatty acids (rPUFA, 2.8/1.3 ppm) measured with ¹H-MRS correlated with the biochemical amount of PUFA relative to total fatty acids (r=0.59, P=0.005,) and with the biochemical amount of omega-6 PUFA relative to total fatty acids (r=0.73, P<.001).PUFA at ¹H-MRS correlated with the histopathologically assessed degree of lobular inflammation in the liver (r=0.57, P=.001).

Conclusion

3.0T ¹H-MRS is able to measure poly- and unsaturated hepatic fatty acids and this strongly correlates with biochemical assessment. This study provides evidence that 3.0-T ¹H-MRS is a noninvasive technique to assess hepatic lipid composition.     

水下光通信PPM数字接收机的DSP实现

水下光通信充分利用了海水对激光的衰减窗口效应,具有隐蔽、安全、非接触和快速机动等特性,兼具无线通信和光纤通信的优点,其关键技术在于光收发端机的研制;PPM(Pulse Position Modulation)数字脉冲位置调制具有低平均功率和高峰值功率等特性,特别适合用于无线数字光通信。两者性能的融合需要高灵敏度数字光接收机的实现。利用阵列光电检测接收、高速A/D转换和信号处理等相关技术,采用DSP处理器,高灵敏度的数字光PPM接收机得以实现,实验和测试表明它大大降低了接收机对于整个系统信噪比的要求,获得了较好的性能。     

一种新的永久周期磁铁聚焦的高功率宽带放大器

 提出了一种新的高功率宽带放大器，它由速调管和自由电子脉塞组成，用永久周期磁铁聚焦。研究了这种器件的电子束聚焦、群聚和辐射。在速调管提供一阶调制系数为30%，波导管的半径1.51cm，摇摆器的磁场振幅0.16T，周期7.92cm，电子束的电压490kV，电流50A和半径0.368cm的条件下，预估这种器件的辐射波频率为11.4GHz，输出辐射功率为18MW，输出辐射带宽为44%。     

紫外激光通信中PPM与Turbo联合编码调制研究

为提高紫外激光通信系统中的编码效率和频带利用率，提出采用PPM（pulse position modulation）调制和Turbo编码相结合的技术来提高效率。此方法不仅能提高频带的利用率，也能提高码间抗干扰能力、纠错能力和降低误码率，并对PPM调制模式下的Turbo码译码公式进行了推导，最后利用Matlab软件实现了该技术的仿真，仿真结果表明：在紫外激光通信中采用PPM和Turbo统一调制编码的技术能进一步降低系统的效率和误码率。     

行波管周期永磁聚焦系统模拟软件的研制

 通过对行波管周期永磁聚焦系统(PPM)的理论分析,开发了2维模拟软件UESTC_PPM。该软件主要用于模拟轴对称的永磁结构,在圆柱坐标系下,采用有限差分的方法迭代求解磁钢内外任意位置处的磁感应强度分布。模拟了单磁环结构以及单周期结构,将结果与Ansoft Maxwell 3D的模拟结果进行了对比,结果表明：轴上、轴向以及径向磁感应强度的分布图均很接近,但UESTC_PPM软件耗时较短,验证了UESTC_PPM的正确性,并具有一定的精确度。     

基于RS编码及网格编码调制的光PPM通信纠错技术

分析了RS(Reed-Solomon)纠错码和网格编码调制（Trellis Coded Modulation,TCM）技术在光脉冲位置调制通信中的应用.在此基础上,提出了以RS码作为外码,以网格编码调制技术作为内码,用于光脉冲位置调制通信的新编码方案,能以几乎不减少通信速率的优势,提高传统RS码系统在时变带限光信道中的通信性能.模拟研究了在不同空间光信道条件下,传统RS码的符号正确传输率和误码率,并对网格编码调制的编码增益、RS码与网格编码调制级联时的编码增益进行了仿真研究,证实了本方案的有效性.     

System identification of a pick-and-place mechanism driven by a permanent magnet synchronous motor

The main objective of this study is to utilize two dynamic models: a mathematical model and a simple model, to identify a pick-and-place mechanism (PPM) which is driven by a permanent magnet synchronous motor (PMSM). In this paper, Hamilton’s principle is employed to derive the mathematical model, which is a nonlinear differential equation, while Newton’s second law is utilized to derive the simple linear model. In system identification, we adopt the real-coded genetic algorithm (RGA) to find not only the parameters of the PPM, but also the PMSM simultaneously. From the identification simulations and experimental results, it is demonstrated that the identification results of the mathematical model present the better matching with the experimental results of the system.