Simultaneous determination of 75 abuse drugs including amphetamines,benzodiazepines, cocaine,opioids, piperazines,zolpidem and metabolites in human hair samples using liquid chromatography–tandem mass spectrometry

A liquid chromatography–tandem mass spectrometric method for the simultaneous determination of 75 abuse drugs and metabolites, including 19 benzodiazepines, 19 amphetamines, two opiates, eight opioids, cocaine, lysergic acid diethylamide, zolpidem, three piperazines and 21 metabolites in human hair samples, was developed and validated. Ten‐milligram hair samples were decontaminated, pulverized using a ball mill, extracted with 1 mL of methanol spiked with 28 deuterated internal standards in an ultrasonic bath for 60 min at 50°C, and purified with Q‐sep dispersive solid‐phase extraction tubes. The purified extracts were evaporated to dryness and the residue was dissolved in 0.1 mL of 10% methanol. The 75 analytes were analyzed on an Acquity HSS T3 column using gradient elution of methanol and 0.1% formic acid and quantified in multiple reaction monitoring mode with positive electrospray ionization. Calibration curves were linear (r ≥ 0.9951) from the lower limit of quantitation (2–200 pg/mg depending on the drug) to 2000 pg/mg. The coefficients of variation and accuracy for intra‐ and inter‐assay analysis at three QC levels were 4.3–12.9% and 89.2–109.1%, respectively. The overall mean recovery ranged from 87.1 to 105.3%. This method was successfully applied to the analysis of 11 forensic hair samples obtained from drug abusers.     

Dynamic light scattering study of the ultrasonication of P(VDF-TrFE): A new model

The purpose of this paper is to understand the mechanisms occurring during the ultrasonication of the copolymer poly(vinylidenedifluoride-trifluoroethylene). In these experimental conditions, the polymer adopts a core–shell structure and its hydrodynamic diameter is measured by dynamic light scattering. The results show that, without covalent bonds breakage, the hydrodynamic diameter decreases with ultrasonication time and a smaller size population appears. This evolution is reversible in a matter of days. A new two-step mechanism is proposed to describe this phenomenon: first the erosion of a core–shell structure and second the contraction of the core. Beyond shedding a new light on the phenomena occurring during the sonication of polymers used in nanocomposites elaboration, this work also strongly questions the traditional techniques used to study the degradation of polymers, which use the hydrodynamic diameter measurement to determine the molecular weight.     

Surface and electrochemical analysis for the understanding of TiO2 nanopores/nanotubes changes in post‐elaboration treatment

The electrochemical stability of TiO₂ nanoarchitecture fabricated in fluoride electrolyte presented in this paper is related to 2D and 3D geometries that present a shift from nanopores toward nanotubes. The fabrication conditions involve a 60 V applied voltage for 2 hours of anodizing in order to create the ordered structures, in a mixture of low‐water glycerol electrolyte and fluoride. With the use of different ultrasonication times, a variety of nanotubes/nanopores were observed. The surface interfacial aspects were investigated mainly by surface microscopy and hydrophilic/hydrophobic balance for the grown structures ultrasonicated at various periods of time. The electrochemical behavior of the nanotube‐structured surface was performed by potentiodynamic evaluation and electrochemical impedance spectroscopy in a simulated body fluid solution. As a most important result, all surface analysis and electrochemical data interpretation permitted the proposition of a model for elaboration of different nanostructures from nanopores to nanotubes. These different surface nanoarchitectures were obtained as a result of ultrasonication at various periods of time. Copyright © 2010 John Wiley & Sons, Ltd.     

Reusable zinc oxide nanoflowers for the synthesis of α-aminophosphonates under solvent-free ultrasonication

A simple wet chemical method is used to prepare zinc oxide nanoflowers (ZnO NFs) which were subjected to various characterization techniques such as XRD, FTIR, UV–Vis, FE-SEM, and XPS. XRD pattern indicates pure, crystalline, and monodispersed form with hexagonal wurtzite phase. The 3-D flower shape morphology with hexagonal ZnO nanorods was confirmed in FE-SEM. The synthesized ZnO NFs was used to study catalytic behavior in Kabachnik–Fields reaction under controlled ultrasound cavitation technique. High surface-to-volume ratio of ZnO NFs and the effect of ultrasonication enhances the yield of α-aminophosphonate. The catalyst was recycled and reused four times without any significant loss of its catalytic activity. Moreover, existing method becomes attractive and practical due to its easy, clean, fast, cost-effective, and eco-friendly procedure.     

Ultrasonic Preparation of Hierarchical Graphene‐Oxide/TiO2 Composite Microspheres for Efficient Photocatalytic Hydrogen Production

Hierarchical graphene oxide (GO)‐TiO₂ composite microspheres with different GO/TiO₂ mass ratios were successfully prepared by mixing GO and TiO₂ microspheres under ultrasonic conditions. Ultrasonication helped the GO and TiO₂ microsphere to uniformly mix on the microscale. The results showed that the GO‐TiO₂ composites that were prepared by ultrasonic mixing exhibited significantly higher hydrogen‐evolution rates than those that were synthesized by simple mechanical grinding, owing to synergetic effects, including enhanced light absorption and scattering, as well as improved interfacial charge transfer because of the excellent contact between the GO sheets and TiO₂ microspheres. In addition, GO‐TiO₂‐3 (3 wt. % GO) showed the highest hydrogen‐generation rate (305.6 μmol h^?), which was about 13 and 3.3‐times higher than those of TiO₂ microsphere and GO‐P25 (with 3 wt. % GO), respectively. Finally, a tentative mechanism for hydrogen production is proposed and supported by photoluminescence and transient photocurrent measurements. This work highlights the potential applications of GO‐TiO₂ composite microspheres in the field of clean‐energy production.     

Sonochemical Synthesis of 1,4‐Disubstituted 1,2,3‐Triazoles in Aqueous Medium

An ultrasound‐accelerated fast and efficient three‐component reaction for the regioselective synthesis of l,4‐disubstituted 1,2,3‐triazoles using different alkyl and allyl halides, terminal alkynes, and sodium azide in water at room temperature has been developed using CuI as catalyst. Ultrasonication dramatically decreases the reaction times.     

Improving the Mechanical Properties of Polycarbonate Nanocomposites with Plasma‐Modified Carbon Nanofibers

The mechanical properties of polycarbonate film embedded with carbon nanofibers were studied based on plasma surface modification of carbon nanofibers by the use of polystyrene. The nanofiber surfaces were modified by various processing conditions including plasma polymerization power, nanofiber concentration, and ultrasonication time. The tensile strength and Young's modulus of the carbon nanofiber‐polycarbonate composites were then measured. The mechanical behavior of the composite was found to be affected by dispersion of the nanofibers. Higher plasma power resulted in improved mechanical strength. A maximum strength (10% increase) was achieved at a low concentration (1 wt.%) of nanofibers. The optimization of ultrasonication time indicated that the maximum strength occurred at different times for the composites with different concentrations of the modified carbon nanofibers.     

A critical reappraisal of recent communications on the hydrodynamic characterization of silica (aerosil) hydrosols

Different results from recent communications on the hydrodynamic characterization of ultrasonicated silica (®Aerosil) hydrosols led to a critical reappraisal of the data.It can be concluded that the degree of dispersion achievable in pyrogenic (Aerosil) hydrosols by ultrasonication is highly sensitive to the detailed parameters of the dispersion process. Characterization in terms ofabsolute numbers of a limiting particle morphology, corresponding to minima of aggregate size, porosity and number of primary particles in the aggregate is not possible.The most straightforward approach for hydrodynamic characterization seems to be a combination of sedimentation and diffusion data.Other approaches using a combination of sedimentation and viscosity data underestimate the particle dimensions. Moreover, they are quite arbitrary since the final result depends upon the proper choice between several equations for fitting the viscosity concentration dependence; the most rigorous approach seems to be an extended Einstein equation which has recently been adapted to particle aggregates.     

Highly Luminescent Cesium Lead Halide Perovskite Nanocrystals with Tunable Composition and Thickness by Ultrasonication

We describe the simple, scalable, single‐step, and polar‐solvent‐free synthesis of high‐quality colloidal CsPbX₃ (X=Cl, Br, and I) perovskite nanocrystals (NCs) with tunable halide ion composition and thickness by direct ultrasonication of the corresponding precursor solutions in the presence of organic capping molecules. High angle annular dark field scanning transmission electron microscopy (HAADF‐STEM) revealed the cubic crystal structure and surface termination of the NCs with atomic resolution. The NCs exhibit high photoluminescence quantum yields, narrow emission line widths, and considerable air stability. Furthermore, we investigated the quantum size effects in CsPbBr₃ and CsPbI₃ nanoplatelets by tuning their thickness down to only three to six monolayers. The high quality of the prepared NCs (CsPbBr₃) was confirmed by amplified spontaneous emission with low thresholds. The versatility of this synthesis approach was demonstrated by synthesizing different perovskite NCs.