Synthesis of molecular sieve AlPO4-12

A member of the novel family of crystalline microporous aluminophosphates, AlPO₄-12, was synthesized by hydrothermal crystallization using different aluminum-containing compounds. Three new crystalline phases were obtained by varying the composition of the reaction mixture. The effect of the synthesis conditions on the hudrothermal process and the kinetics of crystallization are discussed. The apparent activation energies obtained for AlPO₄-12 are 20.9 and 14.6 kcal/mol for nucleation and crystallization, respectively. The adsorption isotherms of one AlPO₄-12 product were measured.     

新型分子筛Ti-MMM-1的合成及其催化性能的研究

通过控制TEOS的水解，在不同时间添加与MCM-41和MFI相应的有机模板剂合成出了一种新型分子筛，Ti-MMM-1，采用XRD、FT-IR和低温N2吸附对其进行表征，并用H2O2氧化环己烷和环己醇对其催化活性进行评价．结果表明，Ti-MMM-1是一种具有MCM-41和MFI结构的两相混合的微孔／介孔材料，IR分析表明钛原子已进入分子筛骨架，并在环己烷和环己醇的氧化中表现出较好的催化活性和较高的选择性．     

Synthesis and Structure of Some N-[3-(Het)aryl-2-propenylidene]trifluoromethylanilines

The reactions of 4-nitrocinnamaldehyde with trifluoromethylanilines in the presence of molecular sieves were studied, and a series of new aromatic and heterocyclic aldimines were synthesized. The molecular and crystal structure of some of them were determined by X-ray crystallographic analysis.     

钛硅分子筛TS-1合成晶化气氛的影响

考察了不同晶化气氛(N2、H2、A ir、O2)对合成钛硅分子筛TS-1的影响,用XRD、IR和N2吸附/脱附对所合成的钛硅分子筛进行结构表征,发现在H2气氛下合成的TS-1结晶度最高,锐钛矿的含量最少;O2气氛下合成的TS-1中锐钛矿含量最高.以氯丙烯氧化为模型反应,考察了不同晶化气氛下合成的钛硅分子筛的催化活性和双氧水的利用效率.结果表明,在H2气氛下所合成的钛硅分子筛的双氧水的利用效率最高.     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

载铜5A分子筛在汽油模拟体系中脱硫性能的研究

近年,美国环保局计划将汽油中硫的质量分数从当前的300×10-6降到2006年的30×10-6,欧盟也已经通过了新的汽油硫质量分数标准为30×10-6~50×10-6,德国甚至提出计划使用无硫汽油[1]。中国汽油硫的质量分数高达800×10-6以上,与世界汽油品质距离甚远。因此汽油中硫化物的脱除成为当务之急。目前,脱硫技术主要有催化裂化脱硫、催化加氢脱硫、水蒸气脱硫、生物催化脱硫、吸附精制脱硫、氧化脱硫等[2~5]。吸附精制法具有净化度高、能耗低、易于操作等优点,高效的脱硫吸附剂制备是过程开发的关键。负载金属离子的活性纤维是脱除汽油中硫醇的一种…     

Solvent-free Mukaiyama aldol reaction of O-silyl dienolates catalyzed by benzoic acid

The vinylogous aldol reaction of O-silyl dienolates deriving from 2,2-dimethyl-[1,3]-dioxin-4-ones proceeds in moderate to excellent yields in the presence of catalytic amounts of PhCOOH under solvent-free conditions. Modest to good yields can be obtained by using silica gel or 3 Å molecular sieves as heterogeneous catalysts.     

SXI route to mesostructured materials from Fau and Beta zeolite precursors: A comparative study of their assembly behaviors in extremely acidic media

Mesoporous molecular sieves were synthesized from Beta and Fau zeolite precursors through S⁺X⁻I⁺ route under extremely acidic conditions in parallel (designated as M_Beta and M_Fau, respectively). The textural properties of M_Fau were different from its M_Beta counterpart but resembled normal MCM-41 silica from TEOS. Al content in M_Beta was almost equivalent to that in the initial Beta zeolite precursors, whereas only trace Al species was present in M_Fau from elemental analysis results. The hydrothermal stability of M_Beta after post-synthesis ammonia treatment was considerably improved compared with normal MCM-41 aluminosilicates, whereas the M_Fau after the same procedure was as unstable as normal MCM-41 silica. Thus, the assembly behaviors of Beta and Fau zeolite precursors were comparatively studied based on these results. The microstructure of Fau zeolite precursors were degraded by the extremely acidic condition, and Al species was dissolved into the synthesis mixture. However, Beta zeolite precursors survived the chemical attack of extremely acidic media and were incorporated into mesostructured framework as primary building units.     

Modification of Surface and Structural Properties of Ordered Mesoporous Silicates

Two simple modification methods for ordered mesoporous silicas were examined and compared. MCM-41 molecular sieve was physically coated with 4-cyano-4-biphenyl [4(4-pentenyloxy)]benzoate (CBPB) and chemically modified using trimethylethoxysilane. The structural and surface properties of the obtained materials were characterized using elemental analysis, thermogravimetry and nitrogen adsorption over a wide pressure range.It was shown that the pore size of the MCM-41 material was not decreased significantly after the coating procedure, even for high loadings of CBPB. Moreover, low pressure adsorption measurements indicated that significant fractions of the MCM-41 surface were not covered by CBPB, even for high CBPB loadings, which suggests that the attained coverage may be very nonuniform. The chemical bonding procedure led to a marked decrease in the pore size and change of surface properties.It was demonstrated that nitrogen adsorption measurements provide a means of a thorough characterization of modified MCM-41 materials, allowing to estimate the surface area, pore volume and pore size distribution. Moreover, low pressure adsorption data can be used to qualitatively or semiquantitatively assess the surface coverage of the coated/bonded organic groups, which may be used to estimate the uniformity of the coverage and therefore, the usefulness of the modification procedure.