Thermoset modified with polyethersulfone: Characterization and control of the morphology

Thermoset (TS) epoxy resins can be toughened with a thermoplastic (TP) for high-performance applications. The final structure morphology has to be controlled to achieve high mechanical properties and high impact resistance. Four polyethersulfone-modified epoxy resins are considered. They consist of different epoxy monomer structure (TGAP, triglycidyl-p-aminophenol and TGDDM, tetraglycidyl diaminodiphenylmethane) and a fixed amount of thermoplastic, and they are cured with two different amounts of curing agent. A reaction-induced phase separation occurs for all formulations generating morphologies, different in shapes and scales. The aim is to control the final morphology and in particular its dominant length scale. This morphology depends on the phase separation process, from the initiation to its final stage. The initiation relies on the relative miscibility of the components and on the stoichiometry between epoxy and curing agent. The kinetics depends on the viscosity of the systems. The different morphologies are characterized by electron microscopy or neutron scattering. Dynamic mechanical analysis allows confirming the presence of a phase separation even when it is not observable by electron microscopy. Vermicular morphologies with few hundreds nanometer width are obtained for the systems containing the TGAP as epoxy monomer. Systems formulated with TGDDM presents morphologies on much smaller scale of order a few tens of nanometers. We interpret the different sizes of the morphologies as a consequence of a larger viscosity for the TGDDM systems as compared to the TGAP ones rather than by a latter initiation of phase separation.     

Thermosetting resins from a tetra-functional vinylbenzene compound possessing cyclic siloxane cores

Cyclic siloxane is an attractive building block for incorporation of silicon-containing units as well as their distinguished properties to polymer materials. This work reports the synthesis and characterization of a tetra-functional vinylbenzene compound possessing cyclic siloxane cores (cD₄-4VB). Synthesis of cD₄-4VB is carried out using cD₄-4SiH as the reactive precursor and multiple-step reactions, including hydrosilylation, deacetylation, and S_N2 substitution. cD₄-4VB is an effective monomer for preparation of the corresponding cyclic silicon-based thermosetting resins (CR-cD₄-4VB). CR-cD₄-4VB shows attractive film formability and good thermo-mechanical properties, including a storage modulus of 2.0 GPa, a glass transition temperature of 282°C, a thermal stability above 400°C, a high char yield (at 800°C in nitrogen) of 55 wt%, and a dielectric constant of 3.12 at 10 GHz. This kind of resins have potential of application for halogen-free flame retardants and high-performance polymer films.     

Lignin and Lignin-Derived Compounds for Wood Applications—A Review

Improving the environmental performance of resins in wood treatment by using renewable chemicals has been a topic of interest for a long time. At the same time, lignin, the second most abundant biomass on earth, is produced in large scale as a side product and mainly used energetically. The use of lignin in wood adhesives or for wood modification has received a lot of scientific attention. Despite this, there are only few lignin-derived wood products commercially available. This review provides a summary of the research on lignin application in wood adhesives, as well as for wood modification. The research on the use of uncleaved lignin and of cleavage products of lignin is reviewed. Finally, the current state of the art of commercialization of lignin-derived wood products is presented.     

Microbial Application to Improve Olive Mill Wastewater Phenolic Extracts

Olive mill wastewater (OMW) contains valuable and interesting bioactive compounds, among which is hydroxytyrosol, which is characterized by a remarkable antioxidant activity. Due to the health claims related to olive polyphenols, the aim of this study was to obtain an extract from OMW with an increased level of hydroxytyrosol by means of microbial enzymatic activity. For this purpose, four commercial adsorbent resins were selected and tested. The beta-glucosidase and esterase activity of strains of Wickerhamomyces anomalus, Lactiplantibacillus plantarum, and Saccharomyces cerevisiae were also investigated and compared to those of a commercial enzyme and an Aspergillus niger strain. The W. anomalus strain showed the best enzymatic performances. The SP207 resin showed the best efficiency in selective recovery of hydroxytyrosol, tyrosol, oleuropein, and total phenols. The bioconversion test of the OMW extract was assessed by using both culture broths and pellets of the tested strains. The results demonstrated that the pellets of W. anomalus and L. plantarum were the most effective in hydroxytyrosol increasing in phenolic extract. The interesting results suggest the possibility to study new formulations of OMW phenolic extracts with multifunctional microorganisms.     

m‐Xylylene bismaleimide: a versatile building block for high‐performance thermosets

m‐Xylylene bismaleimide, Compimide ? ? Compimide® is a registered trademark.
MXBI (hereafter MXBI), was developed as a building block for formulating bismaleimide resins with improved processability. MXBI on its own, or in combination with 4,4′‐bismaleimidodiphenylmethane (Compimide MDAB, hereafter MDAB) and with 2,2′‐diallylbisphenol‐A as a co‐monomer, provides very low‐melting resin blends, which can be processed at temperatures around 60–80°C via RTM (Resin Transfer Moulding), VARIM (Vacuum Assisted Resin Infusion Moulding), prepregging, and wet filament winding (FW). Uncured and cured resin properties were evaluated. The mechanical property spectrum of the MXBI/MDAB/diallylbisphenol‐A system with varying MXBI/MDAB ratio shows almost equivalent contributions of MXBI and MDAB to the mechanical properties of a system. Higher MXBI proportions are responsible for lower resin viscosities and hence superior processability. Copyright © 2015 John Wiley & Sons, Ltd.     

Photonic Patterns Printed in Chiral Nematic Mesoporous Resins

Chiral nematic mesoporous phenol‐formaldehyde resins, which were prepared using cellulose nanocrystals as a template, can be used as a substrate to produce latent photonic images. These resins undergo swelling, which changes their reflected color. By writing on the films with chemical inks, the density of methylol groups in the resin changes, subsequently affecting their degree of swelling and, consequently, their color. Writing on the films gives latent images that are revealed only upon swelling of the films. Using inkjet printing, it is possible to make higher resolution photonic patterns both as text and images that can be visualized by swelling and erased by drying. This novel approach to printing photonic patterns in resin films may be applied to anti‐counterfeit tags, signage, and decorative applications.     

Investigation of shrinkage-induced stresses in stereolithography photo-curable resins

An experimental study has been undertaken to investigate the shrinkage characteristics of acrylic-based and epoxy-based stereolithography (SL) photopolymer resin systems after they have been laser cured and post-cured under ultraviolet (UV), and thermal exposure. The induced residual stresses and strains were determined by the shadow moiré and the hole-drilling strain-gage methods. Out-of-plane displacements (warpage) of acrylic-based post-cured resin plates were recorded by means of the shadow moiré method and correlated to the shrinkage strains by theoretical analysis. The induced residual stresses in the epoxy-based cylindrical resin specimens were determined from strains of three-element strain-gage rosettes of the blind-hole drilling method. Results are presented for the shrinkage stresses and strains for both material systems as a function of the post-curing process (UV, thermal). It was found that the shrinkage strains in the acrylic-based photopolymer resin were of considerable magnitude, while thermal post-curing resulted in higher shrinkage stresses for both material systems. The values of the shrinkage stresses compare well with those of the existing literature.     

玻璃纤维带隙间环氧胶渗流特性的试验研究

 对环氧胶在含有玻璃纤维带的间隙中的渗流进行了试验研究. 通 过试验确定纤维的松紧度、输胶压力、抽口真空度和输胶温度等不同参 数对渗流流速的影响，为环氧胶的VPI(真空压力浸渍或浇铸)工艺提供 工艺参数.     

Biobased vinyl levulinate as styrene replacement for unsaturated polyester resins

Vinyl levulinate (VL) is used as a biobased reactive diluent in styrene (St)‐free unsaturated polyester resins (UPR). The reactivity ratios for the radical copolymerization of VL with diethyl fumarate (DEF) are determined by the Jaacks method (r_VL = 0.01 and r_DEF = 0.81 at 60 °C in DMSO‐d₆). The properties of UPRs having a stoichiometric ratio between unsaturated groups from the UPR and either St or VL are compared. Defect‐free, slightly yellow, transparent, and rigid thermosets are obtained after a mild curing cycle. Due to unfavorable reactivity ratios about 5.5 wt % of unpolymerized VL remains inside the network and acts as plasticizer. Consequently, compared with St‐based ones, VL‐based UPRs exhibit lower α relaxation (T_α = 180 and 100 °C, respectively), lower elastic moduli at the rubbery plateau (G′ = 10⁸ and 10⁷ Pa) and lower mechanical properties as measured by three points bending tests. Strain at break (ε_f = 1.8 ± 0.2%) and Charpy impact strength (～2.7 ± 0.3 kJ m^?2) are comparable independently of the RD chemical nature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3356–3364     

Development of new high‐performance visible light photoinitiators based on carbazole scaffold and their applications in 3d printing and photocomposite synthesis

In this article, new compounds based on the carbazole scaffold (DMs = DM1 and DM2, constituted by a carbazole unit connected on positions 3 and 6 to a two 4,4′‐dimethoxydiphenylamine groups and differing by the substituent present on the nitrogen heteroatom of the carbazole core) were synthesized and proposed as high‐performance visible light photoinitiators/photosensitizers for both the free‐radical polymerization of methacrylates and the cationic polymerization of epoxides upon visible light exposure using LED@405 nm. Remarkably, DM2 leads to higher final conversions than DM1. In order to study the photophysical and photochemical properties of the carbazole derivatives, different parameters were taken into account such as the light absorption, the steady‐state photolysis, and the fluorescence spectroscopy. Using different techniques such as fluorescence quenching, redox behavior, and cyclic voltammetry, we are able to discuss the photosensitization/photoinitiation reactions providing a full coherent picture of the involved chemical mechanisms. The photosensitization of the carbazole derivatives occurred predominantly via singlet excited states at the rate of the diffusion limit. Upon exposure to laser diode at 405 nm, DMs show high performance in initiating systems for 3D resins. Remarkably, DM2 can also be used in photocomposite synthesis using light‐emitting diode conveyor. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2081–2092