甲烷-二氧化碳重整制合成气与现代分析技术应用于探究性化工专业实验的设计与探索

以甲烷-二氧化碳重整制合成气为实例，设计探究性实验，将合成气的制备和现代分析技术应用于化工专业实验的教学实践中以提高学生的创新和实践能力。实验包括催化剂的制备，催化剂的性能评价和催化剂的表征等3大部分。采用工业最常用的浸渍法制备含有不同助剂的Ni/X/γ-Al2O3（X为Co，Fe，MgO，CeO2）催化剂，以甲烷-二氧化碳重整反应评价其催化性能，并采用XRD、H2-TPR、BET和TG对催化剂的微观结构进行表征。结合催化剂的性能评价结果和表征结果，探讨不同助剂对镍基催化剂性能的改善效果及机制。通过开设该实验，可以让学生了解化工学科的前沿知识以及现代分析技术的基本原理和用途，掌握专业的实验操作、数据处理和谱图绘制方法，提高学生的专业素养和综合能力。     

Modeling of biomass-based hydrogen production via catalytic sorption-enhanced reformer integrated with a gasifier

The sorption enhanced reformer concept breaks the thermodynamic limits of steam methane reforming and water-gas shift reactions with selective CO₂ removal to produce more H₂. In this paper, we propose a dynamic kinetic model for sorption-enhanced steam reformers (SERs) integrated with biomass gasifiers. An analysis of operating conditions was conducted to examine high purity hydrogen production. The kinetic model was validated with published literature results at different reactor pressures (5-20 bar), steam/carbon ratios (2-5), and reactor temperatures (673K–1023K). This study shows that biomass gasifiers can be integrated with SER reactors to produce high purity H₂.     

性能优异的Rh改性的Pd/Al2O3密偶催化剂

采用等体积浸渍法制备了Pd/Al2O3和Rh-Pd/Al2O3密偶催化剂,运用H2程序升温还原、CO化学吸附和X射线光电子能谱等手段对催化剂进行了表征,并考察了催化剂对丙烷总包反应和单反应的转化活性.总包反应结果表明, Rh的添加使起燃温度和完全转化温度分别降低了23和18oC.单反应结果证明,添加Rh能提高各单反应丙烷的转化活性,尤其是有NO参与的反应.表征结果证明,掺杂Rh不仅可以抑制活性组分PdOx的烧结,提高PdOx的分散度,而且可以改变其电子状态.     

Effect of the order of Ni and Ce addition in SBA-15 on the activity in dry reforming of methane

Dry reforming of methane has been carried out on SBA-15 catalysts containing 5 wt% Ni and 6 wt% Ce. The effect of the order of Ni and Ce impregnation on the catalytic activity has been studied. Both metals were added using the “two-solvent” method that favors metal dispersion inside the pores. Characterizations by XRD (low and high angles), N₂ sorption, SEM and TEM of the materials after metal addition and calcination indicate good preservation of the porosities and high NiO and CeO₂ dispersion inside the porous channels. Reduction was carried out before the catalytic tests and followed by TPR measurements. The most active reduced catalyst was the Ni–Ce/SBA-15 sample prepared by impregnating cerium first, then nickel. All catalysts were highly active and selective towards H₂ and CO at atmospheric pressure. Full CH₄ conversion was obtained below 650 °C. The higher performances compared to those reported in the literature for mesoporous silica with supported Ni and Ce catalysts are discussed.     

“功能涂料”课程的教学改革:打造趣味性、互动性和挑战性的课堂*

本着培养涂料行业精英人才的宗旨,针对涂料行业对人才需求的特点,结合多年教学经验,从教材的选择、教学内容设置、教学方法改进以及考核方法改革等4个方面探索了“功能涂料”课程的教学方法改革与课程实践。通过自编教材,精心设置授课内容,将科研成果、前沿知识、生活场景、新闻事件与书本知识相结合,提高课堂的趣味性;通过讨论法和交换式互动上课来加强课堂的互动性;通过过程性评价提高课程的学业挑战度。通过教学改革,本课程的选课率和出勤率得到了大幅提高,学生对涂料的兴趣明显增加,毕业后选择进入涂料领域工作的学生也越来越多。     

氮化SBA-16负载镍基催化剂的制备及其对甲烷二氧化碳重整反应的催化性能

通过软模板法合成了SBA-16分子筛,采用高温氨气氮化的方法使有序介孔硅材料中的氧原子部分被氮原子取代,得到氮化的SBA-16载体(SBA-16-N)。采用满孔浸渍法制备了镍基催化剂,并将制得的Ni/SBA-16和Ni/SBA-16-N催化剂用于甲烷二氧化碳重整反应。通过透射电镜、氮气物理吸附、X射线衍射、X射线光电子能谱和二氧化碳程序升温脱附等手段研究了载体和催化剂的结构,并利用热重分析对反应之后回收催化剂进行了表征。结果表明,高温氮化后的分子筛中掺入了氮元素,增加了载体的碱性,改善了载体对反应气体的吸附活化能力,增强了载体与金属之间的相互作用,从而提高了催化剂的活性和抗积炭性能。     

甲醇制氢铜铝尖晶石缓释催化剂的研究—不同铜源合成的影响

以拟薄水铝石为铝源,氢氧化铜、乙酸铜和硝酸铜等为铜源,采用固相法合成Cu-Al尖晶石催化剂。采用TG-MS、XRD、H2-TPR、BET和XANES等表征技术,对合成过程、产物的物相、还原性质及表层结构进行研究,并考察了甲醇重整制氢的缓释催化性能。结果表明,三种铜源都得到尖晶石固溶体,其晶粒粒径相差不大,但其比表面积(25.4-65.9 m2/g)、孔容(0.213-0.434 cm3/g)、表面结构(Cu的分布)以及还原性能有明显的差别,从而导致不同的缓释催化行为。在甲醇重整反应过程中,铜铝缓释催化剂通过反应条件下还原释放活性铜物种而起催化作用。以氢氧化铜合成的催化剂活性高,反应稳定性好,反应后生成的Cu粒子最小(6.6 nm),其表现出优异的催化性能。     

Ni掺杂对Ni/MgO体系中电荷分配影响

采用密度泛函理论(DFT)计算方法,研究了载体Ni掺杂对Ni/MgO催化剂的电子结构及其对CH_4/CO_2重整反应的影响。结果显示,随着载体Ni:Mg比的增加,CH_4解离吸附和CH_x氧化过程的反应能垒均会随之升高,CH也更容易产生热解C,从而导致催化剂的活性和稳定性的下降。通过分析重整过程的Hirshfeld电荷分配,发现金属载体之间电子转移的方向会随着载体中Ni含量的上升由载体向Ni金属转移变为由Ni金属向载体转移。当Ni金属富电子时,反应物活化时电子的转移主要发生在表层Ni原子与吸附物种之间,参与氧化的CH_x物种为CH_2;当Ni金属缺电子时,反应物活化时Ni簇的电子结构基本保持稳定,电子主要在载体表层的Ni原子与反应物之间转移,CH是主要参与氧化的CH_x物种。     

蒸氨法制备铜硅催化剂的二甲醚水蒸气重整制氢性能

采用蒸氨法制备出不同Cu负载量的xCu/SiO_2-AE催化剂,并将其用于二甲醚水蒸气重整制氢反应。当Cu负载量为30%(w)时,30Cu/SiO_2-AE催化剂表现出最佳的催化性能。结果显示,该方法制备的催化剂表面具有高度分散的CuO和层状硅酸铜物相,经还原后分别形成Cu~0和Cu~+物种。与常规浸渍法制备的30Cu/SiO_2-IM催化剂相比,蒸氨法制备的30Cu/SiO_2-AE催化剂具有优异的催化稳定性和活性,这与其独特的层状结构和表面Cu~0与Cu~+之间的协同作用相关。     

Perovskites as Precursors for Ni/La2O3 Catalysts in the Dry Reforming of Methane: Synthesis by Constant pH Co‐Precipitation,Reduction Mechanism and Effect of Ru‐Doping

LaNiO₃ perovskite is an interesting precursor for Ni/La₂O₃ catalysts for the dry reforming of methane at high temperatures. Precursors have been synthesized by co‐precipitation without, with 2.5 at %, and with 5 at % Ru doping. The presence of Ru leads to a stabilization of the perovskite structure and hinders the decomposition into NiO and Ruddlesden‐Popper mixed oxides La_n+1Ni_nO_3n+1, which was observed for the Ru‐free sample upon calcination at 1000 °C (n = 3). Upon reduction in hydrogen, a mechanism involving at least two steps was observed and the first major step was identified as the partial reduction of the precursor leading to a LaNiO_2.5‐like intermediate. The second major step is the reduction to Ni metal supported on La₂O₃ independent of the Ru content of the catalyst. In the presence of Ru, indications for Ni‐Ru alloy formation and for a higher dispersion of the metallic phase were found. The catalytic activity in DRM of the catalyst containing 2.5 % Ru was superior to the catalysts with more or without Ru. Furthermore, the propensity of coke formation was reduced by the presence of Ru.