Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

Formation of polyketone particle structure by hexafluoroisopropanol solvent evaporation and effects of plasticizer addition

Few solvents are capable of dissolving polyketones (PKs). 1,1,1,3,3,3‐Hexafluoro‐2‐propanol (hexafluoroisopropanol, HFIP) is a better solvent than trifluoroethanol and m‐cresol. When HFIP was evaporated from a PK/HFIP solution, a porous cast‐film with a microparticle structure was formed because the isotactic PKs adopted a helical conformation, and convection during evaporation of the high polarity and low‐boiling‐point HFIP caused aggregation and rolling of the polymer molecules. The addition of plasticizer suppressed particle formation, improving the surface structure and mechanical properties of the film. In particular, the dielectric properties of the film improved significantly. This will enable PKs, which are rigid insulating materials, to be used as dielectric materials, broadening their range of applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 887–892     

Template‐free anion‐controlled synthesis of Pd (II) nano‐aggregates for the antifouling polymerization of CO and ethylene

The reaction of [(domppp) Pd (OAc)₂] [domppp = 1,3‐bis (di‐o‐methoxyphenylphosphino)propane] and imidazolium‐functionalized carboxylic acids containing various anions (Br^?, PF₆^?, SbF₆^? and BF₄^?) resulted in the formation of nano‐sized Pd (II) aggregates under template‐free conditions. The rate of formation of aggregates can be modulated by changing the anion, affecting the rate of polymerization of CO and olefins without fouling. Herein, we describe the analysis of Pd (II) catalysts by dynamic light scattering, atomic force microscopy, X‐ray photoelectron spectroscopy and X‐ray crystallography, and co‐ and terpolymerization results including the catalytic activity, and bulk density and molecular weight of polymers.     

Copolymerization of Carbon Monoxide with Cyclic Compounds Catalyzed by Transition Metal Complexes

This article reviews recent discovery and progress of copolymerization of CO with cyclic monomers such as methylenecyclopropanes and propylene oxide promoted by transition metal complexes. 2-Aryl-1-methylenecyclopropanes react with CO in the presence of the Pd catalyst under mild conditions (1 atm, room temperature) to afford the polyketones. The reaction involves alternating insertion of the two monomers and opening of the three-membered ring of the cyclic monomers. Mechanistic study of the polymer growth revealed that 2-aryl-1-methylenecyclopropane undergoes 1,2-insertion into the Pd–acyl bond and subsequent -alkyl elimination of the cyclopropylmethylpalladium group. A bicyclic methylenecyclopropane, 7-methylenebicyclo[4.1.0]heptane, also reacts with CO in the presence of the Pd complexes with diimine ligands to afford the polyketone with six-membered rings in the repeating unit. The NMR spectra of the polyketone indicate the regulated tacticity of the monomer units. Co complexes and a mixture of Co and Ru complexes with carbonyl ligands promote the copolymerization of CO with propylene oxide in the presence of amine additives under CO pressure at 50 atm. Structures of the produced polyesters vary depending on the reaction conditions.     

Synthesis of cross-conjugated polyketones by the crossed-aldol condensation of cyclic ketones with aromatic dialdehydes

Insoluble cross-conjugated polyketones were prepared from terephthalaldehyde and a variety of cycloaliphatic ketones by the crossed-aldol condensation. Elemental analyses and infrared spectra suggest that the polymeric aldol intermediates were not completely dehydrated. Evidence is also presented that suggests conjugate addition of the base to the α,β-unsaturated ketone may occur. Soluble cross-conjugated polyketones were prepared from terephthalaldehyde and 2-indanone, which contains no beta hydrogens, and from cycloaliphatic ketones and 1,2-bis(4-formylphenoxy)ethane, a dialdehyde containing isolated aldehyde groups. It is proposed, therefore, that the lack of solubility in the terephthalaldehyde-based polyketones arises from crosslinking via enolate anions formed at the beta position of the cyclic ketones, which are delocalized through the carbonyl groups of neighboring backbone repeating units. © 1995 John Wiley & Sons, Inc.     

The effect of melt drawing ratio on the crystal structural change and performance of polyketone extrusion cast film

In this paper, the polyketone (POK) extrusion cast film is manufactured by melt stretching method, and the evolution process of the crystal morphology and mechanical properties with the increase of melt drawing ratio (MDR) are followed. The results show that the melt stretching process produces many micro shish-kebab crystals in the POK. The length of the shish crystal and the thickness of the kebab crystal hardly increase with MDR, but the lateral length of the kebab crystal shows linear growth when MDR exceeds 40. The crystalline morphology of POK is mainly affected by melt relaxation. The molecular chain has sufficient relaxation during cooling at a low MDR (20–40). At this time, micro shish-kebab crystals are mainly randomly arranged. When MDR exceeds 40, the rapid melt stretching shortens the relaxation time of the tie chain between the neighborhood shish crystal, and the atomic force microscopy image shows a typical shish-kebab structure. This experimental result indicates that the formation of the oriented lamella structure may be related to the relaxation of the molecular chains between the micro-shish. When the length of the shish axis and the thickness of the kebab lamellae are similar, it is difficult to distinguish the two.     

Alternating copolymerization of carbon monoxide and vinyl arenes using [N,N] bidentate palladium catalysts

The alternating copolymers of carbon monoxide (CO) and vinyl arene monomers, namely aromatic polyketones, are a family of attractive engineering plastic. In the catalytic synthesis of this kind of polymeric materials, [N,N] bidentate palladium catalysts represent the most successful catalytic systems. In this review, we introduce the present status of polyketone synthesis, with a focus on the aromatic polyketones made from vinyl arene and CO. We also address the palladium-catalyzed CO/vinyl arene alternating copolymerization mechanism. A variety of [N,N] bidentate palladium catalysts bearing 2,2′-bipyridine, 1,10-phenanthroline, α-diimine, and pyridine-imine ligands are surveyed for CO/vinyl arene copolymerization. The effects of vinyl arene monomer, counteranion, and solvent on copolymerization are also discussed. The copolymerization stereochemistry including chain end-control and enantiomorphic site control mechanisms is introduced. This review aims to promote the design of [N,N] bidentate palladium catalysts for CO/vinyl arene copolymerization for the development of high-performance aromatic polyketones.     

Effect of tetra‐n‐butylammonium bromide salt on the cationic polymerization of dimethylketene and on the thermal properties of the obtained polyketones

The cationic polymerization of dimethylketene is achieved in dichloromethane at ?30 °C, using a stoichiometric mixture of aluminum bromide (AlBr₃) and tetra‐n‐butylammonium bromide (n‐Bu₄N⁺Br^?) as initiator. Characterizations by ¹H and ¹³C NMR show that the resulting polymers have a perfect polyketonic microstructure. Capillary viscosity, DSC, and SEC analysis show that for a constant monomer/initiator ratio, polymers synthesized in the presence of tetra‐n‐butylammonium bromide are more crystalline and have better properties than those produced only with AlBr₃. Melting temperatures, inherent viscosities and average molecular weights are systematically higher. A good linearity is observed between ln (inherent viscosity) versus ln for the system with n‐Bu₄N⁺Br^?, showing a good control of the molecular weight by the initial feed ratio. The effect of this compound suggests a reversible equilibrium between active and dormant species, which limits the transfer and/or termination reactions, and enables a better control of the cationic polymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1493–1499     

Electric impedance study of elastic alternating propylene-carbon monoxide copolymer (PCO-200)

The electrical properties of elastic alternating propylene-carbon monoxide copolymer (PCO-200) were investigated using the impedance spectroscopy technique. The results revealed a phase transition at about 70 °C where the material transforms from its insulating phase of conductivity in the order of 6×10⁻⁹ to about 9×10⁻⁵ (Ω m)⁻¹, The second phase is characterized by temperature dependent electrical relaxation phenomena. The plot of the complex electric modulus and the complex impedance yields semicircles in the temperature range 70 up to 110 °C and a decreasing radius with increasing temperature. The activation energy was found to be in the order of 0.8 eV.     

双膦Cu及不对称Pd催化剂的结构及其对烯烃-一氧化碳完全交替共聚的催化性能

 配体及配合物的结构对催化烯烃-CO完全交替共聚反应活性及稳定性具有重要的影响. IR和XPS实验结果表明,5-硝基-1,10-菲咯啉的钯配合物催化苯乙烯-CO共聚的高活性与其结构的不对称性有关; 揭示了廉价的Cu金属双膦螯合物作为新型乙烯-CO交替共聚催化剂具有一定的可行性,探讨了配合物结构对烯烃-CO共聚反应活性及稳定性的影响,同时通过IR,1H NMR和13C NMR确认了所得交替共聚物聚酮的结构.