排序方式: 共有13条查询结果,搜索用时 46 毫秒
1.
Steffi I. Macías Guillem Ruano Núria Borràs Carlos Alemán Elaine Armelin 《Journal of polymer science. Part A, Polymer chemistry》2022,60(4):688-700
Among additive manufacturing, photocuring 3D printing technologies are very relevant because of its high printing speed and high precision. However, the limited performance of photosensitive thermoset polymers is the bottleneck for the application of photocuring 3D printing in some fields, particularly in the biomedical sector. Thus, the development of biodegradable and biocompatible materials is highly desirable and of utmost importance. In this work, a biodegradable and non-cytotoxic thermoset polymer for photocuring 3D printing is reported. It consists of an unsaturated polyesteramide bearing phenylalanine, 2-butene-1,4-diol and fumarate building blocks, which is photocured under UV irradiation using a low molecular weight poly(ethylene glycol) diacrylate as crosslinker. The main characteristics of the new thermoset are: (1) very high volumetric and mechanical integrity stabilities, comparable to that of photocured epoxides; (2) very high degradation temperature; (3) very low water absorption capacity; (4) relatively fast enzymatic degradation, reaching 16.5% after 3 months; and (5) non-cytotoxic response in presence of epithelial cells, even when soluble molecular fragments coming from biodegradation are considered. These properties favor the future utilization of the new polyether-polyesteramide resin in the manufacturing of more sustainable products via 3D printing methods, such as stereolithography, that uses UV sources. 相似文献
2.
A series of polyesteramide prepolymers[PrePEA(0/4,8)s] having mixed alternating bisesterdiamide units was synthesized via melt polycondensation from N,N'-bis(2-hydroxyethyl)oxamide(0) and N,N'-bis(2-hydroxyethyl)-adipamide(4) with sebacic acid(8) at different molar ratios.Chain extension of them was conducted with 2,2'-(1,4-phenylene)-bis(2-oxazoline) and adipoyl biscaprolactamate as combined chain extenders.The chain extended polyesteramides[ExtPEA(0/4,8)s] were characterized by proton nuclear magnetic resonance(1H NMR),gel permeation chromatography(GPC),differential scanning calorimetry(DSC),thermogravimetry analysis(TGA),wide angle X-ray scattering,tensile test and enzymatic degradation.The results show that ExtPEA(0/4,8)s were crystalline polyesteramides.They had Tm up to 136.5 ℃ and initial decomposition temperature above 297.5 ℃.They crystallized in similar crystallites into Nylon-66 and degraded under the catalysis of protease or lipase.They are thermoplastic materials with tensile strength up to 21.5 MPa and elongation at break above 64.0%. 相似文献
3.
4.
含ε—己内酯链节的可生物降解聚酯酰胺的合成与表征 总被引:3,自引:0,他引:3
以ε-己内酯与乙二胺,己二胺开环加成反应生成的酰胺二元醇和己二酸为原料,合成了ε-己内酯链节的聚酰胺胺,并用IR,^1H NMR,^13C NMR和DSC进行了表征,该类聚酯酰胺是半晶性聚合物且能够发生生物降解。 相似文献
5.
Melamine modified polyester amide (MPEA) was synthesized by the reaction of linseed oil fatty amide. The resin was further cured at room temperature by polystyrene co‐maleic anhydride (SMA) in different phr (30–80) to obtain MPEA coatings. The probable structure of MPEA was confirmed by FT‐IR, 1H‐NMR and 13C‐NMR spectroscopic techniques. The physico‐chemical characterization of these resins viz. iodine value, saponification value, refractive index, inherent viscosity were carried out by standard methods. MPEA (40 wt%) solution in ethylene glycol monomethyl ether (EGME) was applied on a mild steel strip of standard sizes to study their physico‐mechanical and chemical resistance properties. It was found that coatings of MPEA with 60 parts per hundred of the resin (phr) of SMA showed the best performance in physico‐mechanical and alkali resistance properties. Thermal stability and curing behavior were studied by Thermo Gravimetric Analyses (TGA) and Differential Scanning Calorimetry (DSC), respectively. 相似文献
6.
R. J. Gaymans J. L. De Haan O. Van Nieuwenhuize 《Journal of polymer science. Part A, Polymer chemistry》1993,31(2):575-580
Polybutylene terephthalate–nylon 4T copolymers (PBT–PA 4T) are synthesized from the diamide of diaminobutane and dimethyl terephthalate (DMT) with butane diol and more DMT in a concentration range of up to 50% PA 4T. The polymerization conditions were similar to those for PBT: first, a melt polymerization, followed by solid-state post-condensation. The materials were studied by differential scanning analysis (DSC) (melting and crystallization behavior) and dynamic mechanical thermal analysis (DMTA) (glass transitions and torsion moduli). The water absorptions were determined at 100% RH. By increasing the PA 4T content in the copolymers, melting temperatures increased strongly, heats of fusion decreased slightly, and glass transition temperatures increased linearly. The torsion moduli above the glass transition temperature were higher. © 1993 John Wiley & Sons, Inc. 相似文献
7.
Sharif Ahmad Syed Marghoob Ashraf Fehmida Naqvi Shakuntala Yadav Fahmina Zafar 《高分子科学杂志,A辑:纯化学与应用化学》2013,50(9):1409-1419
To improve the physico‐mechanical and chemical resistance properties, lower the curing temperature of annona squamosa and pongamia glabra seeds oils based polyesteramides [ASPEA, PGPEA], as well as to convert the non‐edible seed oils into value added products, their respective alumina‐incorporated polyesteramides resins [Al‐ASPEA, Al‐PGPEA] have been synthesized. The resins and their coatings have been tested for their chemical, physico mechanical and chemical/corrosion resistance properties. These properties were compared among the prepared resins and with that of previously reported alumina filled linseed polyesteramide [Al‐LPEA]. It was observed that Al‐PGPEA‐71, which has the highest amount of oleic acid chains, shows the best physico‐mechanical and chemical resistance properties. 相似文献
8.
9.
Polymers synthesized from coconut oil as a precursor find scarce applications. Polyesteramide urethane synthesized from coconut oil, a natural resource, is a dough‐like material, unusable in our study. Upon loading with polyaniline it becomes tough and flexible. Composites of ClO4 ? doped polyaniline with coconut oil based poly(esteramide urethane) (CPEAU) were prepared by a solution blending technique, using different ratios of polyaniline(2 wt%, 4 wt% and 8 wt%). The composites were further characterized by FT‐IR, DSC, TGA, XRD, and SEM. Conductivity was found to be in the range 2.5×10?5?5.7×10?4 S cm?1. The composite was found to show weak hydrogen bonding interactions between PANI and CPEAU at 8 wt% loading. 相似文献
10.
利用脂肪族二元酸酯与乙醇胺反应容易获得的对称二酰胺二醇,经缩聚合成聚酯酰胺预聚体,并针对端羧基和端羟基同时扩链来提高分子量,获得可生物降解的聚酯酰胺.首先将N,N′-二(2-羟乙基)草酰胺(HEOA)或N,N′-二(2-羟乙基)己二酰胺(HEHA)与己二酸和丁二醇缩聚,制备同时带有端羧基及端羟基的脂肪族聚酯酰胺预聚体,通过1,4-双(2-噁唑啉)苯及己二酰双己内酰胺混合扩链剂扩链,获得高分子量脂肪族聚酯酰胺,并通过红外、1H-NMR、DSC及TGA对其结构和热性能进行了表征.结果表明,预聚体在制备过程发生了一定的酯-酰胺交换反应;扩链后聚合物的熔点、熔融焓和热稳定性有所下降;但热稳定性仍接近或略高于聚己二酸丁二酯. 相似文献