磷酸浸渍黏土砖中五氧化二磷含量测定方法的改进

研究了磷钼酸铵容量法测定磷酸浸渍黏土砖中五氧化二磷含量的方法,对国家标准分析方法进行了改进,讨论了不同实验条件对实验结果的影响,并进行了精密度和准确度实验。结果准确、重现性好,证明方法可靠。     

Prototype electrochromic device and dye sensitized solar cell using spray deposited undoped and ‘Li’ doped V2O5 thin film electrodes

Lithium (Li) (0–5 wt%) doped V₂O₅ thin films were spray deposited at 450 °C onto ITO substrates. Structural analysis using X-ray diffraction and Raman spectroscopy revealed orthorhombic phase of the films. In addition to the V₂O₅ phase, presence of VO₂ peaks due to high deposition temperature is also evident from structural and optical characterization. The non-stoichiometric nature of the films due to loss of the terminal O atom was confirmed from Raman spectroscopy. The direct band gap, indirect bandgap, and phonon energies were also calculated from optical studies. Different charge states of vanadium ions present in the film were identified from X-ray photoelectron spectroscopy study. Results from cyclic voltammetry experiments reflected significant differences between the undoped and Li doped V₂O₅ samples. Transport properties by Hall-effect measured at room temperature indicated significant increase in conductivity, carrier concentration and mobility of V₂O₅ thin films on doping with Li. A Dye Sensitized Solar Cell (DSSC) was fabricated using mobility enhanced 5 wt% Li doped V₂O₅ film as photoanode and its efficiency was found to be 2.7%. A simple electrochromic cell is fabricated using undoped V₂O₅ thin film to demonstrate the colour change.     

Towards High Performance Chemical Vapour Deposition V2O5 Cathodes for Batteries Employing Aqueous Media

The need for clean and efficient energy storage has become the center of attention due to the eminent global energy crisis and growing ecological concerns. A key component in this effort is the ultra-high performance battery, which will play a major role in the energy industry. To meet the demands in portable electronic devices, electric vehicles, and large-scale energy storage systems, it is necessary to prepare advanced batteries with high safety, fast charge ratios, and discharge capabilities at a low cost. Cathode materials play a significant role in determining the performance of batteries. Among the possible electrode materials is vanadium pentoxide, which will be discussed in this review, due to its low cost and high theoretical capacity. Additionally, aqueous electrolytes, which are environmentally safe, provide an alternative approach compared to organic media for safe, cost-effective, and scalable energy storage. In this review, we will reveal the industrial potential of competitive methods to grow cathodes with excellent stability and enhanced electrochemical performance in aqueous media and lay the foundation for the large-scale production of electrode materials.     

P2O5/SiO2 as an Efficient Reagent for the Preparation of Z -Aldoximes Under Solvent-Free Conditions

Abstract

A facile and efficient method for the preparation of Z-aldoximes is improved by means of P₂O₅/SiO₂ reagent in solvent-free media. Advantages of this method are the use of inexpensive and selective reagent, with high yields in simple operation, and short reaction time under solvent-free conditions.     

ICP-OES测定钒矿石中五氧化二钒的测量不确定度评定

介绍了电感耦合等离子体发射光谱法(ICP-OES)测定钒矿石中五氧化二钒测重不确定度的评定万法.建立了测量过程中各不确定度分量的数学模型,对不确定度来源进行了分析,并对不确定度分量进行量化.当钒矿石中五氧化二钒含量为0.419％时,其扩展不确定度为0.0070％(k=2).     

Efficient Multi‐component Synthesis of Highly Substituted Imidazoles Utilizing P2O5/SiO2 as a Reusable Catalyst

Phosphorus pentoxide supported on silica gel (P₂O₅/SiO₂) has been used as an efficient and reusable catalyst for the one‐pot pseudo four‐component synthesis of 2,4,5‐trisubstituted imidazoles from benzil or benzoin, aldehydes, and ammonium acetate. It was also used for four‐component preparation of 1,2,4,5‐tetrasubstituted imidazoles from benzil or benzoin, aldehydes, primary amine, and ammonium acetate under thermal solvent‐free conditions. The remarkable features of this new procedure are high conversions, cleaner reaction, simple experimental and work‐up procedures and also the catalyst can be easily separated from the reaction mixture and reused several times without any loss of its activity.     

五氧化二钒插层纳米复合材料的组装与电化学性能

五氧化二钒具有二维空间层状结构,层间伸缩性好,具有纳米尺寸,且有可做成无定形、高比表面积的溶胶.凝胶、干凝胶、气凝胶和类气凝胶等多种形态的优点.目前以其为主体的插层纳米复合材料研究十分活跃,本文综述了近年来合成的五氧化二钒插层化合物的组装及其电化学性能研究的进展.     

An efficient method based on indoles for the synthesis of isatins by taking advantage of I2O5 as oxidant

An efficient method to synthesize isatins based on indoles by using inorganic hypervalent I₂O₅ has been explored in good yields, which successfully realized the transformation from indoles to isatins under metal-free, mild condition with broad substrate scope.     

基于CH3NH3PbI3单晶的Ta2O5顶栅双极性场效应晶体管

Organic-inorganic hybrid perovskite methylammonium lead iodide (CH₃NH₃PbI₃) generally tends to show n-type semiconductor properties. In this work, a field-effect transistor (FET) device based on a CH₃NH₃PbI₃ single crystal with tantalum pentoxide (Ta₂O₅) as the top gate dielectric was fabricated. The p-type field-effect transport properties of the device were observed in the dark. The hole mobility of the device extracted from transfer characteristics in the dark was 8.7×10^-5 cm²·V^-1·s^-1, which is one order of magnitude higher than that of polycrystalline FETs with SiO₂ as the bottom gate dielectric. In addition, the effect of light illumination on the CH₃NH₃PbI₃ single-crystal FET was studied. Light illumination strongly influenced the field effect of the device because of the intense photoelectric response of the CH₃NH₃PbI₃ single crystal. Different from a CH₃NH₃PbI₃ polycrystalline FET with a bottom gate dielectric, even with the top gate dielectric shielding, light illumination of 5.00 mW·cm^-2 caused the hole current to increase by one order of magnitude compared with that in the dark (V_GS (gate-source voltage)=V_DS (drain-source voltage)=20 V) and the photoresponsivity reached 2.5 A·W^-1. The introduction of Ta₂O₅ as the top gate dielectric selectively enhanced hole transport in the single-crystal FET, indicating that in the absence of external factors, by appropriate device design, CH₃NH₃PbI₃ also has potential for use in ambipolar transistors.     

Hybrid materials based on vanadium pentoxide intercalation complexes

Neutral macrocyclic compounds (crown ethers and cryptands) and charged molecular species (alkylammonium iodides) were intercalated into vanadium oxide xerogel (V₂O₅ · nH₂O) to study their influence on the electrical behaviour of this inorganic 2D host lattice. Treatment with alkyl or arylammonium iodide solutions produced the intercalation of organic cations accompanied by the reduction of a fraction of V (V) to V (IV). Characterisation by different techniques allowed the postulation of the interlayer arrangement of the guest species. The study of electrical behaviour at different temperatures indicated that the properties of the hybrid materials can be mainly related to the nature of guest species, the degree of host lattice reduction, the interlayer water content, and the␣presence of metal ions deliberately introduced in the system. Received: 23 January 2001 Accepted: 5 April 2001