Synthesis of photoreactive polyimide having indan structure

Polyimide containing an indan unit and alkyl moiety with a high molecular weight was prepared from 5,7‐diamino‐1,1,4,6‐tetramethylindan and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride. This polyimide was amorphous and soluble in common organic solvents, such as tetrahydrofuran, chloroform, and cyclopentanone. Thermogravimetry of the polyimide showed good thermal stability, indicating that a 10% weight loss of the polyimide was observed at 500 °C in nitrogen. The glass‐transition temperature of the polyimide was not observed by DSC measurement between room temperature and 400 °C at a heating rate of 10 °C/min (Apparatus: DSC3100 MAC Science Co., Ltd.). Transparency of the polyimide at 365 nm was 80%. The polyimide acted as a photosensitive resist of negative type by UV radiation. The resist had a sensitivity of 31 mJ/cm² and a contrast of 2.3 when it was developed with cyclopentanone at room temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 423–428, 2002     

Single crystal x-ray diffraction study of dioxane,pyrazine, and pyridine complexes of 3-(1-amino-2,2,2-trifluoroethylidene)-2-imino-1,1,4,5,6,7-hexafluoroindan

Single crystals of complexes of 3-(1-amino-2,2,2-trifluoroethylidene)-2-imino-1,1,4,5,6,7-hexafluoroindan (1) with 1,4-dioxane, pyrazine, and pyridine have been synthesized. Their structure was investigated by X-ray analysis. In crystals of the dioxane complex, compound 1 is present together with its tautomer — 2-amino-3-(1-imino-2,2,2-trifluoroethyl)-1,1,4,5,6,7-hexafluoroindene (1a), and these compounds are in an equilibrium ratio of ～60:40. Gas-phase quantum chemical calculations have been performed to examine the possibility of a tautomeric equilibrium of enaminoimine 1 in the corresponding complexes.     

Synthesis and molecular and crystal structure of 3-(1-amino-2,2,2-trifluoroethylidene)-2-imino-1,1,4,5,6,7-hexafluoroindan and its N-methyl and N,N′-dimethyl derivatives

3-(1-Amino-2,2,2-trifluoroethylidene)-2-imino-1,1,4,5,6,7-hexafluoroindan (2) and its N-methyl and N,N′-dimethyl derivatives were synthesized by the reaction of perforo-1-ethylideneindan with ammonia and methylamine or by methylation of compound 2 with dimethylsulfate. Single crystals were grown and the molecular and crystal structure of the emaninoimine products was investigated. The density functional theory (DFT) quantum chemical calculations were performed to determine possible tautomeric equilibrium of the emaninoimine products.     

Gas‐transport properties of indan‐containing polyimides

A series of indan‐containing polyimides were synthesized, and their gas‐permeation behavior was characterized. The four polyimides used in this study were synthesized from an indan‐containing diamine [5,7‐diamino‐1,1,4,6‐tetramethylindan (DAI)] with four dianhydrides [3,3′4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), 3,3′4,4′‐oxydiphthalic dianhydride (ODPA), (3,3′4,4′‐biphenyl tetracarboxylic dianhydride (BPDA), and 2,2′‐bis(3,4′‐dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)]. The gas‐permeability coefficients of these four polyimides changed in the following order: DAI–BTDA < DAI–ODPA < DAI–BPDA < DAI–6FDA. This was consistent with the increasing order of the fraction of free volume (FFV). Moreover, the gas‐permeability coefficients were almost doubled from DAI–ODPA to DAI–BPDA and from DAI–BPDA to DAI–6FDA, although the FFV differences between the two polyimides were very small. The gas permeability and diffusivity of these indan‐containing polyimides increased with temperature, whereas the permselectivity and diffusion selectivity decreased. The activation energies for the permeation and diffusion of O₂, N₂, CH₄, and CO₂ were estimated. In comparison with the gas‐permeation behavior of other indan‐containing polymers, for these polyimides, very good gas‐permeation performance was found, that is, high gas‐permeability coefficients and reasonably high permselectivity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2769–2779, 2004     

Convenient Synthesis of Spiro[benzo[d]pyrrolo[2,1‐b]thiazole‐3,2′‐indenes] Derivatives via Three‐Component Reaction

The three‐component reaction of N‐phenacylbenzothiazolium bromides, aromatic aldehydes and indane‐1,3‐dione in ethanol at room temperature in the presence of triethylamine as base afforded functionalized spiro[benzo[d]pyrrolo[2,1‐b]thiazole‐3,2′‐indenes] in good yields and with high diastereoselectivity. The ¹H NMR data and single crystal structure clearly indicated that the obtained spiro compounds predominately have one diastereoisomer.     

A diastereoselective total synthesis of the sesquiterpene (±)-mutisianthol

The total synthesis of the phenolic sesquiterpene mutisianthol has been accomplished in 12 steps from the readily available 2-methylanisole. The required trans-1,3-disubstituted indan intermediate was obtained through a diastereoselective thallium(III) mediated ring contraction of a 1-methyl-1,2-dihydronaphthalene derivative.