Optimized POCl3-assisted synthesis of 2-amino-1,3,4-thiadiazole/1,3,4-oxadiazole derivatives as anti-influenza agents

Although recent decades have witnessed the synthesis of 1,3,4-thiadiazoles via phosphorus POCl₃-promoted cyclization reaction, simultaneous access to 2-amino-1,3,4-thiadiazole and 2-amino-1,3,4-oxadiazole analogs remains unexpected and elusive. Herein, a detailed regiocontrolled synthesis of 2-amino-1,3,4-thiadiazoles in good to high yields with good regioselectivities from readily available thiosemicarbazides using POCl₃ was disclosed. Meantime, to establish a comprehensive structure–activity relationship, 2-amino-1,3,4-oxadiazole derivatives as single regioisomers were prepared via EDCI·HCl-triggered cyclization of the thiosemicarbazide intermediates. The in vitro anti-influenza assays proved that the selected compounds with the pyrazine/pyridine ring exhibited certain inhibitory activities against influenza A virus strains A/HK/68 (H3N2) and A/PR/8/34 (H1N1) in MDCK cells. Among them, N-(adamantan-1-yl)-5-(5-(azepan-1-yl)pyrazin-2-yl)-1,3,4-thiadiazol-2-amine (4j) was the most active compound, and exhibited favorable activity with EC₅₀ values of 3.5 μM and 7.5 μM, respectively. In addition, the molecular docking results explained the reason why compound 4j had dual inhibitory activity and revealed the reasonable binding mode of this compound with the M2-S31N and M2-WT ion channels. This compound had the potential to be further developed as an anti-influenza drug.     

乙醇-环己烷体系中NaI活度系数的测定与计算

由于非水溶剂的应用日趋广泛,促使物理化学工作者对于溶剂和溶液性质进行研究,同时开展了有关物理化学数据的测定和积累工作,以利于指导实践[1]。目前文献报道含水混合溶剂中的电解质活度系数较多,但非水混合溶剂中电解质活度系数报道较少。电解质浓溶液活度系数的计算方法目前应用较广的是Pitzer半经验算法[2]。Pitzer的算法中具体物系的β(0)、β(1)等系数需从实测活度系数数据拟合求得。孙仁义等通过测定汽液平衡盐效应的方法研究了盐在混合溶剂中的活度系数[3-4]。最近孙仁义等[5]提出了双液比固定条件下含盐体系汽液平衡数据热力学一…     

Ionic Liquid Iodinating Reagent for Mild and Efficient Iodination of Aromatic and Heteroaromatic Amines and Terminal Alkynes

Hexamethylene bis(N-methylimidazolium) bis(dichloroiodate) (HMBMIBDCI), an ionic liquid iodinating reagent, have been prepared and characterized. Its ability to perform iodination reactions with a variety of substrates has been explored. In general, iodination reactions of aromatic and heteroaromatic amines proceed with good yields in the absence of solvent. Reactions of terminal alkynes in the presence of 1,8-diazabicyclo [5.4.O] undec-7-ene and tetrahydrofuran have been investigated as well.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource: Full experimental and spectral details.]     

Helical chirality in hexamethylene triperoxide diamine

The primary explosive hexamethylenetriperoxide diamine has previously been found to exist in the solid state as a racemic mixture of helically chiral, threefold symmetric enantiomers; another enantiomeric pair of low-energy conformers has been predicted, but has never been observed. We show by solution 2D NMR at 14 T, in achiral solution and by addition of chiral shift reagents, that all four optically isomeric conformers coexist at slow equilibrium on the NMR timescale at room temperature, and can be observed. Calculations of the 1H and 13C NMR chemical shifts using gauge-including atomic orbital methods are in excellent agreement with experiment; thermochemical calculation of the free energies in solution are in somewhat worse agreement, but correctly predict the relative stability of the conformers. Analysis of the effects of chiral shift reagents on the NMR spectra suggests that discrimination between chiral isomers is primarily around the molecular equator, around which the enantiomeric gauche O--O linkages are arrayed.     

反相高效液相色谱法测定动物体液和组织中的HMBA

介绍了用甲醇沉淀萃取法、反相高效液相色谱法分离测定生物样品中的抗癌药物六亚甲基二乙酰胺（ＨＭＢＡ）的新方法。药物的回收率在９３．３％～１０４％之间。对鼠和兔的血、尿及８种组织１５３个样品中的ＨＭＢＡ进行了测定,得到了满意的结果。     

Polyurethane Based Materials for the Production of Biomedical Materials

Polyurethanes (PUs) composed by hard and soft segments have been extensively used in the manufacturing of biocompatible prosthesis and medical devices. A broad variety of PUs can be obtained by modifying the balance between both segments. In the present work, different basically-flexible PUs have been prepared by employing different combinations of aliphatic hexamethylene diisocyanate, poly(ethylene glycol) (Mw 400 Da), poly(ϵ-caprolactone) diol (Mw 530 Da), and 1,4-butanediol. Thermal analysis of the synthesized PUs demonstrated high thermal stability and the assumption of glassy state well below room temperature, in agreement with their marked flexibility. Morphological characterization of PUs films indicated that films prepared by spin coating were smoother and more homogeneous than those obtained by casting. Biological assays performed by using 3T3/BALB-C mouse embryo fibroblast cell line confirmed the absence of toxicity and hence the biocompatibility of PU-films.     

Synthesis and characterization of poly(urethane-sulfone)s

Eight poly(urethane-sulfone)s were synthesized from two sulfone-containing diols, 1,3-bis(3-hydroxypropylsulfonyl)propane (Diol-333) and 1,4-bis(3-hydroxypropylsulfonyl)butane (Diol-343), and three diisocyanates, 1,6-hexamethylene diisocyanate (HMDI), 4,4′-diphenylmethane diisocyanate (MDI), and tolylene diisocyanate (TDI, 2,4- 80%; 2,6-20%). As a comparison, eight polyurethanes were also synthesized from two alkanediols, 1,9-nonanediol and 1,10-decanediol, and three diisocyanates. Diol-333 and Diol-343 were prepared by the addition of 1,3-propanedithiol or 1,4-butanedithiol to allyl alcohol and subsequent oxidation of the resulting sulfide-containing diols. The homopoly(urethanesulfone)s from HMDI and MDI are semicrystalline, and are soluble in m-cresol and hot DMF, DMAC, and DMSO. The copoly(urethane-sulfone)s from a 1/1 molar ratio mixture of Diol-333 and Diol-343 with HMDI or MDI have lower crystallinity and better solubility than the corresponding homopoly(urethane-sulfone)s. The poly(urethane-sulfone)s from TDI are amorphous, and are readily soluble in m-cresol, DMF, DMAC, and DMSO at room temperature. Differential scanning calorimetry data showed that poly(urethane-sulfone)s have higher glass transition temperatures and melting points than the corresponding polyurethanes without sulfone groups. The rise in glass transition temperature is 20–25°C while the rise in melting temperature is 46–71°C. © 1994 John Wiley & Sons, Inc.     

Poly(hexamethylene guanidine)‐based hydrogels with long lasting antimicrobial activity and low toxicity

Long lasting antimicrobial activity and low toxicity are essentials for hydrogels in biomedicine. However, most reported hydrogels cannot combine these characteristics. In this work, poly (hexamethylene guanidine) hydrochloride (PHMG), a cheap cationic polymer with two terminal amino groups, was first modified with methacrylic anhydride to give PHMG dimethacrylamide (PHMGDMAAm), which was further used to prepare hydrogels with acrylamide (AAm) under ultraviolet irradiation in the presence of α‐ketoglutaric acid (α‐KGA) as photoinitiator in aqueous medium. The resultant hydrogels showed strong antibacterial activity against both Gram‐negative and Gram‐positive bacteria due to the PHMG segments in the hydrogel backbone. Moreover, the antimicrobial activity of the hydrogels did not decrease significantly after being soaked in water for one month and washed by water frequently for many times. Hemolysis and cytotoxicity assays demonstrated the excellent biocompatibility of the PHMG‐PAAm hydrogels. This kind of low cost cationic hydrogels with long lasting antimicrobial activity and low toxicity is expected to have potential applications in biomedicine. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2027–2035     

PIB‐based polyurethanes. IV. The morphology of polyurethanes containing soft co‐segments*

Novel polyurethanes consisting of polyisobutylene (PIB)/poly(tetramethylene oxide) (PTMO) or PIB/poly(hexamethylene carbonate) (PC) soft co‐segments in combination with 4,4′‐methylene‐bis(cyclohexyl isocyanate)/1,6‐hexanediol, 1,4‐butanediol, or 1,6‐hexamethylene diamine hard segments exhibit excellent mechanical properties (upto 31 MPa tensile strength with 700% elongation) together with unprecedented oxidative/hydrolytic stability. A structural model of the morphology of these polyurethanes was developed that reflects this combination of properties. The key new elements of our model are H bridges between the PTMO and PC type soft and urethane hard segments, which compatibilize the soft and hard domains, and the presence of large quantities of chemically resistant PIB soft segments that protect the other oxidatively/hydrolytically vulnerable constituents. A variety of FTIR, DSC, SAXS, AFM, and DMTA experiments strongly support the proposed morphological model. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6180–6190, 2009     

聚碳酸六亚甲基酯-共-癸二酸酐的合成及其体外生物降解性能

制备;聚碳酸六亚甲基酯-共-癸二酸酐的合成及其体外生物降解性能