Nanocrystalline cellulose/fluorinated polyacrylate latex via RAFT‐mediated surfactant‐free emulsion polymerization and its application as waterborne textile finishing agent

A simple method for nanocrystalline cellulose (NCC)/fluorinated polyacrylate was developed by RAFT‐mediated surfactant‐free emulsion polymerization, in which the nanocomposites formed a core‐shell spherical morphology. The influence of the content of NCC‐g‐(PAA‐b‐PHFBA) (AA was acrylic acid, HFBA was hexafluorobutyl acrylate) on the properties of latex and film were systematically studied. The monomer conversion, the tensile strength, and water–oil repellency of film increased first and then decreased, the latex particle size decreased first and then decreased, when the content of NCC‐g‐(PAA‐b‐PHFBA) increased from 1 to 6 wt %. Elongation at break and thermal stability distinctly decreased when the content of NCC‐g‐(PAA‐b‐PHFBA) gradually increased. XPS showed that the fluorine‐containing groups well concentrated at the film–air interfaces during the annealing process. SEM analysis revealed that the treated fiber had a rugged surface, and the treated fabric had an excellent water repellency. In addition, this green grafting method in water offered a new perspective for the fabrication of exceptional NCC‐based nanocomposites with NCC as the core and also helped to promote the potential applicability of NCC in a range of multipurpose applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1305–1314     

Amphiphilic Graft Copolymers of Hydroxypropyl Cellulose Backbone with Nonpolar Polyisobutylene Branches

The novel amphiphilic graft copolymers with hydrophilic hard polar hydroxypropyl cellulose(HPC) backbone and hydrophobic soft nonpolar polyisobutylene(PIB) branches have been successfully synthesized through nucleophilic substitution reaction of living PIB chains carrying oxonium ions with the-OH groups along HPC backbone. The PIB branch length in the graft copolymers could be designed by living cationic polymerization and the grafting density could be adjusted by PIB~+/-OH molar ratio. The living PIB chains carrying oxonium ion were prepared by transformation of allyl bromide end groups in the presence of AgClO_4 and silver nanoparticles(3.2±0.3 nm, 0.7 wt%-1.8 wt%)generated in situ from AgBr. The phase-separation morphology was formed in the graft copolymers due to their incompatibility between backbone and branches. The hydrophilicity on the surface of graft copolymer films could be turned to hydrophobicity by increasing grafting density or/and length of PIB branches. The soft PIB segments in graft copolymers provided an unique surface via self-assembly for anti-protein adsorption against bovine serum albumin. A small amount of Ag nanoparticles in the copolymers contributed to good antibacterial activities against Staphylococcus aureus or Escherichia coli.     

The Reductive Dehydration of Cellulose by Solid/Gas Reaction with TiCl4 at Low Temperature: A Cheap,Simple, and Green Process for Preparing Anatase Nanoplates and TiO2/C Composites

Metal oxides and metal oxide/carbon composites are entering the development of new technologies and should therefore to be prepared by sustainable chemistry processes. Therefore, a new aspect of the reactivity of cellulose is presented through its solid/gas reaction with vapour of titanium(IV) chloride in anhydrous conditions at low temperature (80 °C). This reaction leads to two transformations both for cellulose and titanium(IV) chloride. A reductive dehydration of cellulose is seen at the lowest temperature ever reported and results in the formation of a carbonaceous fibrous solid as the only carbon‐containing product. Simultaneously, the in situ generation of water leads to the formation of titanium dioxide with an unexpected nanoplate morphology (ca. 50 nm thickness) and a high photocatalytic activity. We present the evidence showing the evolution of the cellulose and the TiO₂ nanostructure formation, along with its photocatalytic activity. This low‐temperature process avoids any other reagents and is among the greenest processes for the preparation of anatase and also for TiO₂/carbon composites. The anisotropic morphology of TiO₂ questions the role of the cellulose on the growing process of these nanoparticles.     

High water‐content thermoresponsive hydrogels via electrostatic macrocrosslinking of cellulose nanofibrils

Atom transfer radical polymerization (ATRP) has been utilized to synthesize tri‐ and star‐block copolymers of poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) and quaternized poly(2‐(dimethylamino)ethyl methacrylate) (qPDMAEMA). The block copolymers, all with a minimum of two cationically charged blocks, were sequentially used for electrostatic macrocrosslinking of a dilute dispersion of anionic TEMPO‐oxidized cellulose nanofibrils (CNF, 0.3 wt%), forming free‐standing hydrogels. The cationic block copolymers adsorbed irreversibly to the CNF, enabling the formation of ionically crosslinked hydrogels, with a storage modulus of up to 2.9 kPa. The ability of the block copolymers to adsorb to CNF was confirmed by quartz crystal microbalance with dissipation monitoring (QCM‐D) and infrared spectroscopy (FT‐IR), and the thermoresponsive properties of the hydrogels were investigated by rheological stress and frequency sweep, and gravimetric measurements. This method was shown to be promising for the facile production of thermoresponsive hydrogels based on CNF. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3415–3424     

Application of microcrystalline cellulose as an efficient and cheap sorbent for the extraction of metoprolol from plasma and wastewater before HPLC–MS/MS determination

A dispersive solid-phase extraction method based on a new sorbent has been performed on plasma and wastewater samples to determine metoprolol by high-performance liquid chromatography–tandem mass spectrometry. In this study, the analyte was adsorbed from the samples onto microcrystalline cellulose as a green and efficient sorbent and then eluted for use in the determination step. In the mass spectrometer, the analyte was detected in the positive mode and selectivity of the analysis was increased by sequential mass analysis through multiple reaction monitoring. All of the effective parameters in the extraction of metoprolol from plasma and wastewater were optimized. Under optimal conditions the method was linear in the ranges of 1–1,000 and 0.1–1,000 ng/ml in plasma and wastewater samples, respectively. The detection limits of the method were 0.30 and 0.03 ng/ml in plasma and wastewater samples, respectively. The data showed that the method provides low detection limit, wide linear range, good precision and high extraction recovery. Finally several plasma and wastewater samples were successfully analyzed using the method. The use of a small amount of a green and inexpensive sorbent and a low volume of plasma without the need for further pretreatment steps are the main advantages of the method.     

Cellulose nanofibrils derived from pulp as a high performance separator for lithium-ion batteries

Cellulose nanofibrils (CNFs) from hardwood bleached kraft pulp (HwBKP) are produced via enzymatic, chemical, and mechanical treatment. A nanoporous structured CNF-based separator is produced, and the electrochemical performance, morphology, and thermal stability analyses are performed in comparison to the commercial polyethylene separator. The results obtained show that the electrolyte-philic CNF separator has capacity retention of 88.6% over 200 cycles and very good ionic conductivity and wettability results due to its high hydrophilic nature. At 140°C, the CNF separator was resilient to heat and remained intact. The CNF separator reflects high thermal resistance and good electrolyte uptake properties that are among the mandatory requirements of a separator hence, a promising contender for use in lithium-ion batteries.     

Self-assembly on natural cellulose: Towards high-efficient catalysts

Nanoarchitectures based on the layer-by-layer self-assembly technique hold great potential for the availability and applicability of bio-inspired functional materials. The introduction of various specific functional building blocks onto the nanofibers of natural cellulose substances (e.g., commercial filter paper, cotton, etc.) through the self-assembly approach provides a facile strategy for the fabrication of artificial nanomaterials. This review summarizes a series of cellulose-based catalytic materials fabricated by utilizing the natural cellulose substance as the structural scaffolds or templates through the LbL self-assembly process. The unique three-dimensional network porous structures and high surface areas of the cellulose substances were maintained by the resultant cellulose-derived catalysts, while the excellent mechanical strength of the cellulose-based membrane catalysts was inherited from the initial cellulose substrates. When employed for the photodegradation of organic dyes, the photocatalytic hydrogen production from water splitting, and the antibiosis, these cellulose-based catalysts exhibited high activities and excellent cycling stabilities.     

可再生纤维素/环糊精聚合物对水中亚甲基蓝吸附行为

利用甘蔗渣提取纤维素修饰环糊精聚合物,成功制备可再生纤维素/环糊精聚合物（SUG-EPI-CDP）吸附剂。采用傅利叶红外光谱仪（FT-IR）与热重分析仪（TGA）对材料进行表征,同时考察了该材料对水中亚甲基蓝（MB）吸附特性和机理的影响。结果表明：在溶液pH值为7、温度为30 ℃的条件下,SUG-EPI-CDP可在120 min内有效去除MB,去除率达80.9%。通过模型拟合发现,SUG-EPI-CDP对MB的吸附是自发且吸热的过程,符合准二阶动力学方程和Langmuir等温线模型。该吸附剂实验最大吸附量达8.1 mg/g,远高于其他废料所制备的吸附剂。结果表明,利用可再生纤维素修饰可有效提高环糊精聚合物的吸附性能,同时为甘蔗渣资源化利用提供了新途径。     

Behavior of biodegradable composites based on starch reinforced with modified cellulosic fibers

The aims of this study were to develop composite films based on potato starch and cellulose modified with toluenediisocyanate, to investigate their morphology and structure, and to evaluate their behavior to enzymatic hydrolysis and their potential use to manufacture of biodegradable seedling pots. The effects of modified cellulosic fibers upon mechanical properties and biodegradability of composite materials based on starch matrix were investigated by tensile strength tests, Fourier infrared spectroscopy, X‐ray diffraction, and dynamic vapor sorption. The behavior of the films to enzymatic hydrolysis with amylase and cellulase was studied; the kinetic of enzymatic hydrolysis and characterization of materials are reported. Chemical modification of cellulose improves tensile strength with about 47%, and decreases the biodegradability of composites making them more resistant to microbial attack, thus prolonging their shelf life. Copyright © 2015 John Wiley & Sons, Ltd.     

Photonic Patterns Printed in Chiral Nematic Mesoporous Resins

Chiral nematic mesoporous phenol‐formaldehyde resins, which were prepared using cellulose nanocrystals as a template, can be used as a substrate to produce latent photonic images. These resins undergo swelling, which changes their reflected color. By writing on the films with chemical inks, the density of methylol groups in the resin changes, subsequently affecting their degree of swelling and, consequently, their color. Writing on the films gives latent images that are revealed only upon swelling of the films. Using inkjet printing, it is possible to make higher resolution photonic patterns both as text and images that can be visualized by swelling and erased by drying. This novel approach to printing photonic patterns in resin films may be applied to anti‐counterfeit tags, signage, and decorative applications.