The removal of heavy metal cations by natural zeolites

In this study, the adsorption behavior of natural (clinoptilolite) zeolites with respect to Co²⁺, Cu²⁺, Zn²⁺, and Mn²⁺ has been studied in order to consider its application to purity metal finishing wastewaters. The batch method has been employed, using metal concentrations in solution ranging from 100 to 400 mg/l. The percentage adsorption and distribution coefficients (K_d) were determined for the adsorption system as a function of sorbate concentration. In the ion exchange evaluation part of the study, it is determined that in every concentration range, adsorption ratios of clinoptilolite metal cations match to Langmuir, Freundlich, and Dubinin–Kaganer–Radushkevich (DKR) adsorption isotherm data, adding to that every cation exchange capacity metals has been calculated. It was found that the adsorption phenomena depend on charge density and hydrated ion diameter. According to the equilibrium studies, the selectivity sequence can be given as Co²⁺ > Cu²⁺ > Zn²⁺ > Mn²⁺. These results show that natural zeolites hold great potential to remove cationic heavy metal species from industrial wastewater.     

Self‐Assembled Monolayers of Cucurbit[6]uril on a Gold Electrode for 4,4′‐Oxydianiline Determination. Analytical Application

Self‐assembled monolayers of cucurbit[6]uril (CB[6]) on a gold electrode have been used for 4,4′‐oxydialine (ODA) analysis. The formation of the supramolecular complex between ODA and CB[6] was used for the molecular selection and the electroanalytical determination of this analyte. In addition to this, all the parameters affecting the modification of the gold electrode and the determination of 4,4′‐oxydianiline were optimized by square wave voltammetry. Upon the electrode modification, pentanethiol was employed to fill up the exposed surface between CB[6] molecules. The calculated detection and determination limits were 0.06 µg mL^?1 and 0.19 µg mL^?1, respectively, with good accuracy and precision as shown by the calculated values for the relative error and relative standard deviation (E_r=0.1 % and RDS=2.9 %; n=10 ). Moreover, the developed methodology was successfully applied to the 4,4′‐oxydialine determination in real wastewaters and shoe‐dyeing samples.     

Book Reviews

Glossary On Air Pollution, Who Regional Publications European Series No. 9 (Director, Promotion of Environmental Health, WHO Regional Office for Europe, Scherfigsvej 8, DK-2100 Copenhagen θ) 1980, 114 pages (including an introduction, a list of reviewers and a list of the sources of definitions), stiff paper cover, format 239 ± 159 mm, ISBN 92-9020-109-6, WHO Health and Biomedical Information Programme, CH-1211 Geneva 27, SFr. 12.

Spektroskopische Methoden in Der Organischen Chemie (in German), by Manfred Hesse, Herbert Meier and Bernd Zeeh, 478 pages, including 169 figures and 86 tables, flexible paper cover, ISBN 3-13-576101-0, Georg Thieme Verlag, Stuttgart 1979, price DM 26.80.

Analysis of Polycyclic Aromatic Hydrocarbons in Environmental Samples, World Health Organisation/International Agency for Research on Cancer, IARC Publication No. 29 (Series: Environmental Carcinogens, Selected Methods of Analysis, Volume 3, edited by H. Egan, Laboratory of the Government Chemist, London, U.K. et al.) 1980, 240 pages (including 17 figures, 18 tables, many formulae, an annex with 8 methods of analysis and 29 pages of valuable references in two sections), linen, format 242 ± 186 mm, ISBN 92-8-321129-4, WHO Health and Biomedical Information Programme, CH-1211 Geneva 27, US$30 or SFr. 50.

Toxic Metals and Their Analysis by Eleanor Berman, Cook County Hospital, Chicago, Illinois, U.S.A., 304 pages (including an index of 5 pages, 29 tables and 5 figures), linen, format 241 × 163 mm, ISBN 0-85501-468-7, published 1980 by Heyden International Topics in Science, Spectrum House, Hillview Gardens, London NW4 2JQ, U.K., prices £12, US$27 or DM 56.     

Rapid Synergistic Extraction And Atomic Absorption Spectrometric Determination Of Iron In Environmental Samples Using Tributyl Phosphate And N-Phenyl-2-Furylacrylohydoroxamic Acid

Abstract

Iron (III) was rapidly extracted as its ternary complex with tributyl phosphate and N-phenly1-2-furylacrylohydroxamic acid (PFHA) from weakly acidic (pH 1.0-1.5) solutions into isobutyl methyl ketone and was determined atomic absorption spectrometrically. The method tolerated the presences of a large number of anions and cations commonly associated with iron, and was successfully tested with certified samples of coal fly ash, alloys, and plant tissues. It was also applied to the analysis of animal tissues, natural waters, and wastewaters; validating it by standard addition technique. PFHA was selected from nine new hydroxamic acids.     

Electromembrane extraction (EME) and HPLC determination of non-steroidal anti-inflammatory drugs (NSAIDs) in wastewater samples

In this paper, an electromembrane extraction (EME) combined with a HPLC procedure using diode array (DAD) and fluorescence detection (FLD) has been developed for the determination of six widely used non-steroidal anti-inflammatory drugs (NSAIDs): salicylic acid (SAC), ketorolac (KTR), ketoprofen (KTP), naproxen (NAX), diclofenac (DIC) and ibuprofen (IBU). The drugs were extracted from basic aqueous sample solutions, through a supported liquid membrane (SLM) consisting of 1-octanol impregnated in the walls of a S6/2 Accurel^® polypropylene hollow fiber, and into a basic aqueous acceptor solution resent inside the lumen of the hollow fiber with a potential difference of 10 V applied over the SLM. Extractions that were carried out in 10 min using a potential of 10 V from pH 12 NaOH aqueous solutions shown concentration enrichments factors of 28-49 in a pH 12 NaOH aqueous acceptor solution. The proposed method was successfully applied to urban wastewaters. Excellent selectivity was demonstrated as no interfering peaks were detected. The procedure allows very low detection and quantitation limits of 0.0009-9.0 and 0.003-11.1 μg L⁻¹, respectively.     

Flow injection spectrophotometric determination of copper in petroleum refinery wastewaters

This paper reports a new strategy for flow injection spectrophotometric Cu (II) determination in petroleum refinery wastewaters, exploring its reaction with sodium diethyldithiocarbamate (DDTC), without solvent extraction step, thus avoiding the use of harmful organic solvents. The influence of several chemical and flow variables was studied as well as the possible interferences. Under optimized conditions, the flow system was able to process 63 samples per hour, with a detection limit of 23 ng ml⁻¹ and a RSD of 2.1% at the 0.2 μg ml⁻¹ level. In order to attest the accuracy of the methodology, seven samples of effluents were analyzed by the proposed method and the results were compared with that obtained by FAAS. It was observed that the physical interferences verified in the FAAS procedure, which only permits its use by the standard addition method, were not present in the FIA procedure. The results obtained by FIA method were not statistically different from that obtained by FAAS-standard addition method. Also, the analysis of three spiked samples provided recovery percentages between 93 and 103%.     

Environmental risk assessment of pharmaceutical residues in wastewater effluents, surface waters and sediments

Pharmaceutical residues in the environment, and their potential toxic effects, have been recognized as one of the emerging research area in the environmental chemistry. The increasing attention, on pharmaceutical residues as potential pollutants, is due that they often have similar physico-chemical behaviour than other harmful xenobiotics which are persistent or produce adverse effects. In addition, by contrast with regulated pollutants, which often have longer environmental half-lives, its continuous introduction in the environment may make them “pseudopersistents”.Pharmaceutical residues and/or their metabolites are usually detected in the environment at trace levels, but, even that, low concentration levels (ng/L or μg/L) can induce to toxic effects. In particular, this is the case of antibiotics and steroids that cause resistance in natural bacterial populations or endocrine disruption effects.In this study, an overview of the environmental occurrence and ecological risk assessment of pharmaceutical residues is presented from literature data. Risk Quotient method (RQ) was applied as a novel approach to estimate the environmental risk of pharmaceuticals that are most frequently detected in wastewater effluents, surface waters and sediments.     

Comparative of the removal of Pb2+, Cd2+ and Ni2+ by nano crystallite hydroxyapatite from aqueous solutions: Adsorption isotherm study

Release of heavy metal onto the water and soil as a result of agricultural and industrial activities may pose a serious threat to the environment. In this study, the adsorption behavior of nano hydroxyapatite with respect to Pb²⁺, Cd²⁺ and Ni²⁺ has been studied in order to consider its application to purity metal finishing wastewater. The batch method has been employed, using metal concentrations in solution ranging from 100 to 400 mg/L. The uptake capacity and distribution coefficients (K_d) were determined for the adsorption system as a function of sorbate concentration. The Langmuir, Freundlich, and Dubinin–Kaganer–Radushkevich (DKR) isotherms applied for sorption studies showed that the amount of metal sorbed on nano hydroxyapatite. It was found that the adsorption phenomena depend on charge density and hydrated ion diameter. According to the equilibrium studies, the selectivity sequence can be given as Pb²⁺ > Cd²⁺ > Ni²⁺. These results show that nano hydroxyapatite holds great potential to remove cationic heavy metal species from industrial wastewater.     

二氧化氯催化氧化处理含酚废水的研究

以3种模拟的高浓度含酚废水为处理对象，在室温常压下，以二氧化氯为催化剂，在自制催化剂的作用下进行催化氧化分解酚类物质的研究，考察了PH，ClO2废水（体积比），反应时间，反应温度等对CODCr去除率的影响。实验表明该法能有效地降低含酸废水的CODCr，去除率达90％以上，是一种行之有效的含酚废水处理方法。     

Occurrence of betablockers in effluents of wastewater treatment plants from the Lyon area (France) and risk assessment for the downstream rivers

Five betablockers (oxprenolol, metoprolol, propranolol, bisoprolol, betaxolol) were analysed in effluents collected over a 3-month period from wastewater treatment plants (WTP) from the Lyon area in France. The analytical protocol consisted of solid phase extraction of the dissolved aqueous phase on HLB cartridges and analysis by gas chromatography coupled with mass detection (GC-MS) after derivatization. Concentrations of metoprolol, propranolol and bisoprolol varied from 45 to 2838 ng/L whereas oxprenolol and betaxolol were never detected in these effluent samples. A high variability of betablockers concentrations and fluxes was observed between WTP effluents and within each WTP over the time period studied. Considering a flux per person for a dry weather period, Fontaine plant was pointed out as the less efficient WTP, which might be explained by its type of treatment (biological aerated filters). But we need additional analysis of effluent and influent waters to confirm this hypothesis. A tentative approach of local environmental risk assessment of propranolol based on the calculation of PEC/PNEC (predicted environmental concentration/predicted non effect concentration) ratio approach lead us to conclude on a negligible risk for the downstream rivers (Rhône river at Ternay and Saône river at Couzon Mt d’Or).