Modulating Charge Carrier Efficient Separation Enabled by Lewis Base Modification in Paper-based Photoelectrochemical Sensor

The separation efficiency of charge carriers determines the analytical sensitivity of the paper-based photoelectrochemical sensor. Herein, the Lewis base modification strategy is proposed to promote the carrier separation through an in-situ ion exchange method. Firstly, three-dimensional paper-based hierarchically TiO₂ (PHT) arrays are prepared with the one-step hydrothermal method. With the aid of Lewis base, the photo-induced charge separation efficiency and the photocurrent signal are obviously increased. Ultimately, sensitive sensing of prostate specific antigen (PSA) is achieved and the linear range is 1 pg/mL–100 ng/mL with the detection limitation of 0.3 pg/mL.     

Regulating Phase Junction and Oxygen Vacancies of TiO2 Nanoarrays for Boosted Photoelectrochemical Water Oxidation

In this study, we have provided a facile solution to synthesize well-aligned titanium dioxide nanorods by using hydrothermal reaction. By calcining the materials under different atmospheres and temperatures, a batch of titanium dioxides with excellent oxygen evolution reaction(OER) catalytic efficiency were obtained. This new structured TiO₂ photoanode material yields a high photocurrent density of 5.69 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE) under simulated solar light(100 mW/cm²). Surface photovoltage techniques and other measurements were carried out to confirm that the enhanced photoelectrochemical performances were attributed to the synergistic effect of the phase junction and a certain content of surface states, which accelerate the separation and transmission of the photogenerated charges. This material with phase junction and surface states promises a potential application in the field of photoelectric catalysis under solar light.     

BiVO4/TiO2 heterojunction with rich oxygen vacancies for enhanced electrocatalytic nitrogen reduction reaction

The large-scale production of ammonia mainly depends on the Haber–Bosch process, which will lead to the problems of high energy consumption and carbon dioxide emission. Electrochemical nitrogen fixation is considered to be an environmental friendly and sustainable process, but its efficiency largely depends on the activity and stability of the catalyst. Therefore, it is imperative to develop highefficient electrocatalysts in the field of nitrogen reduction reaction (NRR). In this paper, we developed a BiVO₄/TiO₂ nanotube (BiVO₄/TNT) heterojunction composite with rich oxygen vacancies as an electrocatalytic NRR catalyst. The heterojunction interface and oxygen vacancy of BiVO₄/TNT can be the active site of N₂ dynamic activation and proton transition. The synergistic effect of TiO₂ and BiVO₄ shortens the proton transport path and reduces the over potential of chemical reaction. BiVO₄/TNT has high ammonia yield of 8.54 μg·h⁻¹·cm⁻² and high Faraday efficiency of 7.70% in −0.8 V vs. RHE in 0.1 M Na₂SO₄ solution.     

High efficiency of Mn–Ce‐modified TiO2 catalysts for the low‐temperature oxidation of Hg0 under a reducing atmosphere

Manganese‐ and cerium oxide‐modified titania catalysts were prepared by the deposition precipitation for the removal of elemental mercury (Hg⁰) from simulated yellow phosphorus off‐gas at low temperature. In addition, these catalysts were characterized by X‐ray diffraction, Brunauer–Emmett–Teller measurements, X‐ray photoelectron spectroscopy and field‐emission scanning electron microscope to determine the surface morphology of the obtained compounds and explore their formation mechanism. The results revealed that a Mn–Ce loading and reaction temperature of 10% and 150 °C, respectively, as well as a Mn/Ce molar ratio of 2:1, led to an optimal efficiency for the oxidation of elemental mercury. Furthermore, the effects of flue gas components were investigated. The presence of O₂ clearly promoted the oxidation of Hg⁰. A CO atmosphere did not affect the Hg⁰ oxidation, when compared with N₂, whereas the presence of H₂S and water vapor inhibited the oxidation process. Furthermore, the X‐ray photoelectron spectroscopy spectra of Hg 4f revealed that the elemental mercury adsorbed by the catalyst is present as HgO. Finally, the Hg⁰ catalytic oxidation mechanism was discussed on the basis of the experimental results and characterization analysis.     

Palladium nanoparticles‐decorated triethanolammonium chloride ionic liquid‐modified TiO2 nanoparticles (TiO2/IL‐Pd): A highly active and recoverable catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous medium

In this work, an easily obtained procedure was successfully implemented to prepare novel palladium nanoparticles decorated on triethanolammonium chloride ionic liquid‐functionalized TiO₂ nanoparticles [TiO₂/IL‐Pd]. Different methods were carried out for characterizations of the synthesized nanocatalyst (HR‐TEM, XPS, XRD, FE‐SEM, EDX, FT‐IR and ICP). TiO₂/IL‐Pd indicated good catalytic activity for the Suzuki–Miyaura cross‐coupling reaction of arylboronic acid with different aryl halides in aqueous media at ambient temperature. The recycled catalyst was investigated with ICP to amount of Pd leaching after 6 times that had diminished slightly, Thus, was confirmed that the nanocatalyst has a good sustainability for C–C Suzuki–Miyaura coupling reaction. The catalyst can be conveniently separated by filtration of the reaction mixture and reused for 6 times without significant loss of its activity. It supplies an environmentally benign alternative path to the existing protocols for the Suzuki–Miyaura reaction.     

PbSe/TiO2同轴异质结纳米管的制备及光催化性能

通过溶液法合成了PbSe/TiO2复合纳米管,并对其进行了微观形貌、晶体结构等的表征。结果表明,制得的样品是由PbSe和TiO2两种材料构成的复合材料,致密、均匀的TiO2薄膜包覆在PbSe纳米管表面。以氙灯为模拟光源,通过对甲基橙的降解研究了PbSe/TiO2复合纳米管的光催化性能。结果显示,PbSe与TiO2之间形成的异质结使PbSe/TiO2复合纳米管具有较高的光催化性能,比纯PbSe纳米管的催化降解率提高了约4.5倍。另外,对PbSe/TiO2复合纳米管光催化稳定性也进行了研究。     

Flower-like shaped Bi12TiO20/g-C3N4 heterojunction for effective elimination of organic pollutants: Preparation,characterization, and mechanism study

Flower-like shaped Bi₁₂TiO₂₀ (Bismuth Titanate)/g-C₃N₄ (graphite-like carbon nitride) heterojunction was prepared through hydrothermal and sonification methods for the degradation of organic pollutants by visible-light irradiation. The preparation process, chemical structures, and the mechanism of photocatalytic enhancement of the heterostructures were studied systematically. Under visible-light irradiation, the novel flower-like shaped Bi₁₂TiO₂₀/g-C₃N₄ heterojunction demonstrates prominent activities for the degradation of rhodamine B and p-nitrophenol, with the introduction of flower-like shaped Bi₁₂TiO₂₀ into g-C₃N₄ composites greatly increasing the activity of pure g-C₃N₄. This activity enhancement for the heterojunction could be mainly attributed to its low recombination speed of electron–hole pairs, high adsorption ability of organic pollutants, and better optical absorption ability. Moreover, in the visible-light system of Bi₁₂TiO₂₀/g-C₃N₄, ^•OH also contributed to the degradation of pollutants, which may explain the enhanced photocatalytic activity after the introduction of Bi₁₂TiO_20, as ^•OH is inactive in pure g-C₃N₄. Furthermore, 10 wt.% Bi₁₂TiO₂₀/g-C₃N₄ showed not only high activity but also good stability for degradation of aqueous organic pollutants, implying potential applications prospect.     

Feasible Tuning of Surface OVs on (001) TiO2 for Superior Photocatalytic Nitrogen Fixation Activity

A feasible tuning method for oxygen vacancies was realized by annealing under 3 atm H₂ with (001)-exposed TiO₂ nanosheets. The colored TiO₂ sample exhibits an excellent N₂ photo-fixation rate owing to the abundant oxygen vacancies (OVs) thus demonstrating that annealing with high pressure H₂ is exceedingly efficient for tuning surface OVs.     

In-situ preparation and electrochromic properties of TiO2/PTPA-HTAN core-shell nanocomposite film

A new star-shaped structure conjugated microporous polymers, poly (2,8,14-tri[4-diphenyl-benzene]-hexaazatrinaphthylene) (PTPA-HATN), was designed and in-situ electrochemically polymerized on the surfaces of FTO electrodes with a directional alignment TiO₂ nanorod array to obtain TiO₂/PTPA-HATN core-shell nanocomposite films. Compared with the PTPA-HATN film, the TiO₂/PTPA-HATN composite film exhibits higher optical contrast and faster response time, with contrast of 57% at 783 nm, coloring time of 3.62 s and discoloring time of 2.55 s (43%, 4.63 s and 4.77 s for PTPA-HATN film, respectively). After 400 cycles, the contrast of nanocomposite film decreased by 28%, while the PTPA-HATN film basically lost its electrochromic properties. A simple three-layer EC prototype device based on TiO₂/PTPA-HATN nanocomposite film constructed with hydrogel electrolyte clearly shows color changes at different voltages. On the one hand, the formation of core-shell porous nanostructure of TiO₂/PTPA-HATN composite film provides a larger ion doping/de-doping interface, shortening the average diffusion length of ions. On the other hand, the large indented polymer-nanorods contact interface makes it difficult for the polymer to detach from the electrode, thus significantly improving the cyclic stability of the composite film.     

高岭石基复合材料在光催化领域应用的研究进展

环境污染和能源紧缺已成为当今社会亟须解决的重大问题。高岭石基复合材料光催化处理技术因绿色环保、经济安全、无二次污染而备受关注。鉴于高岭石在光催化领域的研究现状,本文介绍了高岭石的层状硅酸盐结构特征及其在光催化领域的应用优势,综述了高岭石基光催化材料的主要类型、基本特征、合成方法、改性过程、光催化特点及其应用进展与优势,最后,提出了高岭石基复合材料在光催化领域应用的重点研究方向。以期获得制备工艺简单、光催化性能优异、原料易获取且无环境污染的高岭石基光催化复合材料,从根本上解决环境污染问题,缓解能源紧缺危机。