Enhanced magnetoconductivity and electrical property of MWCNT-CdS nanocomposite embedded in polyaniline

PANI/MWCNT-CdS nanocomposites with different content of CdS wt.% has been synthesized by the chemical oxidative in-situ polymerization reaction of aniline in the presence of multi-walled carbon nanotubes (MWCNT). TEM, XRD, FTIR, and TGA studies were done for the structural and thermal characterization of the samples respectively. The particle size of CdS nanoparticles distributes in between 2.7 and 4.8 nm. XRD spectrum reveals that the co-existence of MWCNT, CdS in PANI matrix, where CdS forms a hexagonal structure. TGA result shows that nanocomposite becomes more thermally stable with the increase in CdS content. The dc electrical transport property of PANI/MWCNT-CdS nanocomposites has been investigated within a temperature range 77 ≤ T ≤ 300 K. The dc conductivity follows a 3D variable range hopping (VRH) model. A large magnetoconductivity change (19%) is observed for 2 wt% CdS content in PANI/MWCNT-CdS, which is explained by the wave function shrinkage model.     

Superparamagnetic POT/Fe3O4 nanoparticle composites with supported Au nanoparticles as recyclable high-performance nanocatalysts

A novel method has been developed to successfully synthesize Fe₃O₄ nanoparticles with tunable size and morphology supported on shells of poly(o-Toluidine)(POT) hollow microspheres. The as-prepared POT/Fe₃O₄ nanoparticle composites can be used as novel and magnetic-responsive catalyst supports to produce highly efficient and recyclable noble metal catalysts. The size of Fe₃O₄ nanoparticles supported on shells of POT hollow microspheres can be tuned from 4 to 12 nm by changing the concentration of Fe ions. The roles of the doping acid of POT and Zeta potentials of Fe₃O₄ nanoparticles and POT in the formation of the POT/Fe₃O₄ nanoparticle composites were discussed. Furthermore, gold nanoparticles that were supported on the as-synthesized POT/Fe₃O₄ nanoparticle composites have been achieved by utilizing the reactivity of POT towards Au ions. The size of gold nanoparticles can be tuned by altering the concentration of HAuCl₄. Finally, the catalytic activity of the obtained POT/Fe₃O₄/Au composites for 4-nitrophenol (4NP) reduction is investigated. The results demonstrate that such magnetic-responsive polymer-supported gold nanoparticles can be easily recovered and reused five times still remains high catalytic performance, which indicate their potential applications in the field of catalysis.     

热解二氧化钛/聚苯胺制备高效非贵金属氧还原电催化剂

为了克服传统Pt系催化剂价格昂贵、稳定性差的缺点,采用热解新型Ti O2/聚苯胺(PANI)复合物的方法合成了Ti O2/C催化剂.用扫描电子显微镜、X射线光电子能谱、X射线衍射、傅里叶变换红外光谱、拉曼光谱、透射电子显微镜、循环伏安法和线性扫描伏安法等方法研究了热处理和PANI复合比例对复合物的形貌、成键、晶相组成及氧还原性能的影响.结果表明,PANI与Ti O2间存在相互作用,可以抑制Ti O2的团聚和锐钛矿向金红石的转变.热处理制得Ti O2/C的氧还原活性随着PANI载体含量增加先升高后降低,PANI和Ti O2质量比为35/100时,催化剂的氧还原活性最高.同时,循环伏安和时间-电流曲线测试表明,已制备的复合材料在催化氧还原反应进行时具有较好的稳定性.     

Morphological and dimensional control via assembly of polyaniline crystals

A facile and general route to a new generation of polyaniline(PANI)-citric acid(CA) crystals such as 2D nanoplates, 2D nanosheets and 3D microrods self-assembled by the π-π stacking interaction is reported. Dramatic, 3D rectangular shaped microrods and 2D nanosheets are single crystals indicated by SAED patterns and HRTEM images. Moreover, the method does not depend on any specific equipment or heating, cooling and complex procedures. The novel polyaniline crystals will be useful for next generation organic electronics such as nano-transistors.     

表面增强拉曼散射光谱研究聚苯胺纳米棒的构象转变

采用电化学沉积法制备了聚苯胺(Polyaniline,PANI)纳米棒、树枝状银和纳米颗粒银基体。并利用表面增强拉曼散射光谱技术(Surface-enhanced Raman Scattering,SERS)研究了PANI纳米棒的分子链在Ag金属表面的构象变化。实验结果表明由于Ag金属表面的等离子共振效应,PANI分子中N原子的孤对电子与Ag的自由电子产生共轭效应,使得PANI分子链上的电荷重新分布,结果 C—H面内弯曲振动频率和C—C键的伸缩频率向低波数方向移动(蓝移);拉曼散射频率增强的基团在金属表面倾向垂直于分子链的主轴,拉曼散射频率减弱的基团在金属表面倾向平行于分子链主轴。     

Solid‐Contact Potentiometric Sensor Based on Polyaniline and Unsubstituted Pillar[5]Arene

A novel potentiometric sensor based on screen‐printed carbon electrode covered with electropolymerized polyaniline (PANI) and unsubstituted pillar[5]arene as ionophore has been developed and tested in potentiometric measurements of pH and metal ions. The introduction of pillar[5]arene improved the reversibility of the pH response in the range from 2.0 to 9.0 with the slope of 45 mV/pH. Among metal cations, the response to Fe³⁺ and Ag⁺ ions was referred to PANI redox conversion whereas the signal toward Cu²⁺ in the range from 1.0×10^?6 to 1.0×10^?2 M (limit of detection (LOD) 3.0×10^?7 M) to specific interaction with the macrocycle.     

A multifrequency EPR study of poly(PADPA) synthesized with Trametes versicolor laccase from the aniline dimer p-aminodiphenylamine (PADPA) in the presence of anionic vesicles

Poly(PADPA) synthesized with the enzyme Trametes versicolor laccase (TvL) at pH = 3.5 in aqueous solution from the aniline dimer p-aminodiphenylamine (PADPA) was studied by EPR spectrometry at X-band and W-band frequencies. For the synthesis of poly(PADPA), vesicles formed from AOT (sodium bis-(2-ethylhexyl)sulfosuccinate) were used as structure-directing templates, and TvL/O₂ as catalyst and oxidant. The isolated product is abbreviated as “poly(PADPA)-TvL-AOT” to distinguish it from poly(PADPA) obtained by other means. The EPR spectrum of poly(PADPA)-TvL-AOT recorded at room temperature is complex. It can be decomposed into two separate Dyson–type spectral components. Furthermore, the spectra measured at high frequency exhibit a line broadening behavior in comparison to the spectra recorded at low frequency where there is no line broadening. This behavior was used to estimate the effective inter-chain spin exchange interaction for each monitored spectral component. The obtained effective distances between the polymer (or oligomer) chains in both identified components of poly(PADPA)-TvL-AOT can be explained by considering slightly different interactions between the chains and the AOT molecules present in the sample. Additionally, due to different average g tensor values, g_av, of these components, it seems that each spectral component originates from one of two different molecular subunits (or local structural motifs) within the polymer (or oligomer) chains.     

Fabrication of 3D ordered needle-like polyaniline@hollow carbon nanofibers composites for flexible supercapacitors

Carbon nanofiber-based supercapacitors have broad prospects in powering wearable electronics owing to their high specific capacity,fast charge/discharge process,along with long-cycling life.Herein,a poly(ac rylo n it rile-co-β-methyl hydrogen itaconate) copolymer was prepared and used to synthesize flexible hollow carbon nanofibers(HCNFs) via an electrospinning method without breaking after multiple bending.Subsequently,the inner and outer surfaces of HCNFs were evenly covered with ordered needlelike polyaniline(PANI) through in-situ polymerization methods to obtain three-dimensional flexible HCNFs/PANI composites,which exhibited a high capacity 1196.7 F/g at 1 A/g and good cycling stability(90.1% retention at 5 A/g after 3000 cycles).The symmetrical supercapacitor based on the HCNFs/PANI composites also delive red an outsta nding electrochemical performance with high energy/power density(60.28 Wh/kg at 1000 W/kg) and superior cycling durability(90% capacitance retention after at 5 A/g3000 cycles),which confirmed that the HCNFs/PANI composites had a wide application potential in flexible energy storage devices.     

Influence of silver-decorated multi-walled carbon nanotubes on electrochemical performance of polyaniline-based electrodes

In this work, silver (Ag) nanoparticles were deposited on multi-walled carbon nanotubes (MWNTs) by chemical reduction while Ag-decorated MWNTs (Ag-MWNTs)/polyaniline (PANI) composites were prepared by oxidation polymerization. The effect of the Ag incorporated into the interface of the composites on the electrochemical performance of the MWNTs/PANI was investigated. It was found that highly dispersed Ag nanoparticles were deposited onto the MWNTs, and the Ag-MWNTs were successfully coated by PANI. According to cyclic voltammograms, the Ag-MWNTs/PANI exhibited significantly increased electrochemical performances compared to MWNTs/PANI and the highest specific capacitance obtained of MWNTs/PANI and 0.15 M Ag-MWNTs/PANI was 162 F/g and 205 F/g, respectively. This indicated that Ag nanoparticles that were deposited onto the MWNTs caused an enhanced electrochemical performance of the MWNTs/PANI due to their high electric conductivity, which resulted in an increase of the charge transfer between the MWNTs and PANI by a bridge effect.