Raising the bar on-bead: Efficient on-resin synthesis of α-conotoxin LvIA

α4/7-Conotoxin LvIA is an isoform-selective inhibitor of the α3β2 nicotinic acetylcholine receptor. An efficient strategy for the synthesis of this toxin is critical to advancing its utility as a probe for receptor function and as a potential pharmaceutical lead target. On-resin methods for peptide synthesis offer potential synthetic advantages; however, strategies for on-resin formation of multiple disulfides have historically been low-yielding. Here, we harness the reactivity of the Allocam protecting group and employ a 3-amino acid spacer strategy to synthesize α4/7-conotoxin LvIA via three different on-resin strategies, each of which results in an isolated yield higher than previous fully on-resin approaches.     

New Palladium – ZrO2 Nano-Architectures from Thermal Transformation of UiO-66-NH2 for Carbonylative Suzuki and Hydrogenation Reactions

The new nanocomposites, Pd/C/ZrO₂, PdO/ZrO_2, and Pd/PdO/ZrO₂, were prepared by thermal conversion of Pd@UiO-66-Zr−NH₂ (MOF) in nitrogen or air atmosphere. The presence of Pd nanoparticles, uniformly distributed on the ZrO₂ or C/ZrO₂ matrix, was evidenced by transmission electron microscopy, scanning electron microscopy (SEM), Raman and X-ray Photoelectron Spectroscopy (XPS) methods. All pyrolysed composites retained the shape of the MOF template. They catalyze carbonylative Suzuki coupling under 1 atm CO with an efficiency significantly higher than the original Pd@UiO-66-Zr−NH₂. The most active PdO/ZrO₂ composite, formed benzophenone with TOF up to 1600 h⁻¹, while by using Pd@UiO-66-Zr−NH₂, much lower TOF values, 51–95 h⁻¹, were achieved. After the reaction, PdO/ZrO₂ was recovered with the same composition and catalytic activity. Very good results were also obtained in the transfer hydrogenation of benzophenones to alcohols with Pd/C/ZrO₂ and PdO/ZrO₂ catalysts under microwave irradiation.     

Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

Iodine-transfer polymerization and CuAAC “click” chemistry: A versatile approach toward poly(vinylidene fluoride)-based amphiphilic triblock terpolymers

This study presents the synthesis and properties of linear PVDF-based amphiphilic triblock terpolymers with PS and PEO, [PVDF-b-PS-b-PEO], by adopting a procedure that involves: (a) iodine-transfer polymerization (ITP) of VDF with 1-iodoperfluorohexane (C₆F₁₃I) serving as chain-transfer agent (CTA) to afford C₆F₁₃-PVDF-I, (b) ITP of styrene with the C₆F₁₃-PVDF-I macromolecular-CTA to obtain C₆F₁₃-PVDF-b-PS-I diblock copolymer, (c) end-group exchange from iodo- to azido-group by nucleophilic substitution reaction with NaN_3, and (d) copper-catalyzed azide-alkyne cycloaddition (CuAAC) with alkyne-terminated PEO to achieve C₆F₁₃-PVDF-b-PS-b-PEO triblock terpolymers. The ¹H and ¹⁹F NMR spectroscopy confirmed the presence of all blocks, while gel permeation chromatography traces showed the living nature of ITP technique. The self-assembly of these terpolymers was investigated in films (atomic force microscopy and DSC), as well as in aqueous and organic solvents (DLS). The analysis of crystalline phases based on the FTIR spectroscopy indicated the conversion of PVDF α-phase into α + β-phases and β + γ-phases upon the incorporation of PS and PEO blocks, respectively. The synthesized amphiphilic copolymers were evaluated (fluorescence spectroscopy) as carriers of small hydrophobic molecules in water. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 163–171     

Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

Transient analysis on surface heated piezoelectric semiconductor plate lying on rigid substrate

Based on the thermo-electro-elastic coupling theory, the mathematical model for a surface heated piezoelectric semiconductor (PS) plate is developed in the time domain. Applying the direct and inverse Laplace transformations to the established model, the mechanical and electrical responses are investigated. The comparison between the analytical solution and the finite element method (FEM) is conducted, which illustrates the validity of the derivation. The calculated results show that the maximum values of the mechanical and electrical fields appear at the heating surface. Importantly, the perturbation carriers tend to concentrate in the zone near the heating surface under the given boundary conditions. It can also be observed that the heating induced elastic wave leads to jumps for the electric potential and perturbation carrier density at the wavefront. When the thermal relaxation time is introduced, all the field quantities become smaller because of the thermal lagging effect. Meanwhile, it can be found that the thermal relaxation time can describe the smooth variation at the jump position. Besides, for a plate with P-N junction, the effect of the interface position on the electrical response is studied. The effects of the initial carrier density on the electrical properties are discussed in detail. The conclusions in this article can be the guidance for the design of PS devices serving in thermal environment.     

The Identification of a Novel Highly Condensed Pentacyclic Heteroaromatic Ring System 1,3,5,5b,6,8,10,10b‐Octaazacyclopenta[h,i]Aceanthrylene and its Application in the Synthesis of 5,7‐Substituted Pyrazolo[4,3‐d]Pyrimidines

Pyrazolo[4,3‐d]pyrimidines are of interest as potential kinase inhibitors. This article describes the formation of a novel highly conjugated, condensed, centrosymmetric heteroaromatic compound, 4,9‐dichloro‐2,7‐diisopropyl‐1,3,5,5b,6,8,10,10b‐octaazacyclopenta[h,i]aceanthrylene ( 3 ), during the chlorination of 5,7‐dihydroxypyrazolo[4,3‐d]pyrimidine ( 1 ) with phenylphosphonic dichloride. The nucleophilic attack of benzylamine on 3 afforded N‐benzyl‐5‐chloro‐3‐isopropyl‐1H‐pyrazolo[4,3‐d]pyrimidin‐7‐amine ( 6 ), which was further substituted to yield a pyrazolo[4,3‐d]pyrimidine analogue of roscovitine, a well‐known cyclin‐dependent kinase inhibitor.     

Controlling coffee ring structure on hydrophobic polymer surface by manipulating wettability with O2 plasma

A simple and novel method is firstly reported for controlling coffee ring structure on polystyrene (PS) film surface by O₂ plasma. O₂ plasma treatment leads to the wettability change of PS surface from hydrophobic to hydrophilic. For hydrophilic PS surface the coffee ring structure is avoided relying on the motion of contact line (CL) while SiO₂ microspheres are left. The motion of the CL is produced based on the viscosity and Marangoni effect with the addition of polymer additives. For hydrophobic PS surface coffee ring structure still persists even with polymer additives because SiO₂ microspheres transfer with the motion of the CL at the beginning of droplet evaporation and accumulate at the droplet edge at late stage with the pinning of the CL. As a result, uniform and macroscale SiO₂ microspheres deposition without coffee ring structure and SiO₂ microspheres deposition with coffee ring structure are controlled by O₂ plasma. This method provides a new way to tune coffee ring structure with smart surface and may be potentially useful for a range of application at material deposition and diagnosing diseases.     

重力场流分离系统用于聚苯乙烯颗粒的分离条件优化

重力场流分离是最简单的场流分离(gravitational flow-field fractionation,GrFFF)技术,常用于分离粒径几微米到几十微米的颗粒及生物样品。利用自组装加工的重力场流分离仪器分离3种不同粒径(3、6、20μm)的聚苯乙烯(PS)颗粒。自制了一种混合表面活性剂,并与商品化的表面活性剂FL-70进行了比较。通过均匀设计优化流速、混合表面活性剂中聚乙二醇辛基苯基醚(Triton X-100)的质量分数、载液黏度、停流时间等分离条件,以分离度(Rs)和保留比(R)为评价指标,发现FL-70的分离效能略优于自制的混合表面活性剂,可实现3种PS颗粒的完全分离(Rs1为1.771,Rs2为2.074)。结果表明该系统具有良好的分离性能。     

SO_2和H_2O(g)对新疆高钠煤中钠挥发和形态迁移的研究

在水平管式炉上进行了400-1 100℃新疆高钠煤恒温燃烧实验,并利用逐级提取的方法分析煤及煤灰中钠的赋存形态,研究煤中钠的释放和形态迁移特性。重点考察700和1100℃下H_2O(g)和SO_2(g)单因素及双因素对煤中无机钠挥发和形态迁移的影响。结果表明,随着温度的升高,煤中钠的释放比例逐渐增大,其中,有机态钠最先析出,其次是水溶态无机钠,硅铝酸盐形式的无机钠则由于高热稳定性不易分解或挥发。低温下(700℃)H_2O(g)的存在降低了钠的挥发,而较高温度下(1 100℃)焦炭与水蒸气反应生成的局部还原性气氛促进煤中钠的挥发,但当入口气氛中H_2O(g)浓度高于20%时,促进作用减小。SO_2的存在抑制了煤中钠的挥发,随着燃烧温度升高,SO_2对钠的抑制作用减弱。H_2O和SO_2双因素作用下,低温下(700℃)抑制了煤中钠的挥发,而较高温度下(1 100℃)钠的挥发特性取决于两者在入口气氛中的浓度。对于选取的高钠煤,20%H2O和2.0×10-3SO_2入口气氛下,1 100℃煤燃烧钠的挥发比例由86%提高到了87.1%。