New directions in perfluoroalkyl sulfonic acid–based proton-exchange membranes

Perfluoroalkyl sulfonic acid (PFSA) polymer membranes have enabled a variety of electrochemical energy storage and conversion devices such as fuel cells and flow batteries and material conversion devices such as electrolyzers to produce hydrogen and chlorine. For decades, a small group of simple copolymers were relied on in these applications. The practical limits for conductivity through lower equivalent weight are being approached for these polymers. Recently, the community has recognized the need for new PFSA ionomers with properties tailored to the specific needs of each application. An emerging area of importance is the manipulation of the diffusion properties of these polymers. For example, fuel cell membranes need to maintain good barrier properties as thicknesses are reduced, while ionomers with increased oxygen diffusion rates are sought for fuel cell electrodes. In recent years, the class of PFSA ionomers has expanded to include new side chain structures, new comonomers, and even hydrocarbon hybrid structures.     

Inverse colloidal crystal membranes for hydrophobic interaction membrane chromatography

Hydrophobic interaction membrane chromatography has gained interest due to its excellent performance in the purification of humanized monoclonal antibodies. The membrane material used in hydrophobic interaction membrane chromatography has typically been commercially available polyvinylidene fluoride. In this contribution, newly developed inverse colloidal crystal membranes that have uniform pores, high porosity and, therefore, high surface area for protein binding are used as hydrophobic interaction membrane chromatography membranes for humanized monoclonal antibody immunoglobulin G purification. The capacity of the inverse colloidal crystal membranes developed here is up to ten times greater than commercially available polyvinylidene fluoride membranes with a similar pore size. This work highlights the importance of developing uniform pore size high porosity membranes in order to maximize the capacity of hydrophobic interaction membrane chromatography.     

An improved cell membrane chromatography method for the simultaneous screening of two epidermal growth factor receptor antagonists from radix scutellariae

A high‐expression epidermal growth factor receptor cell membrane chromatography using the silica gel with the average particle size of 3 μm as the stationary phase carrier coupled with high‐performance liquid chromatography and mass spectrometry was established for the online screening of epidermal growth factor receptor antagonists from Radix Scutellariae (Huang Qin in Chinese), a traditional Chinese medicine. In this study, the growth factor receptor cell membrane chromatography model using the smaller particle size carrier showed a higher efficiency for simultaneous screening baicalein, another one of the potential epidermal growth factor receptor antagonists from Radix Scutellariae extract besides wogonin, which was found in our previous work. The molecular docking result showed the occupancy site and binding mode of baicalein and wogonin with epidermal growth factor receptor tyrosine kinase were similar to gefitinib. The result of the assay for the in vitro inhibitory activity showed that baicalein and wogonin inhibited the growth of the high‐expression epidermal growth factor receptor cell in a dose‐dependent manner and even achieved a better inhibition effect than gifitinib in the low‐dosage range.     

Coronaviruses Use ACE2 Monomers as Entry-Receptors

The angiotensin-converting enzyme 2 (ACE2) has been identified as entry receptor on cells enabling binding and infection with the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) via trimeric spike (S) proteins protruding from the viral surface. It has been suggested that trimeric S proteins preferably bind to plasma membrane areas with high concentrations of possibly multimeric ACE2 receptors to achieve a higher binding and infection efficiency. Here we used direct stochastic optical reconstruction microscopy (dSTORM) in combination with different labeling approaches to visualize the distribution and quantify the expression of ACE2 on different cells. Our results reveal that endogenous ACE2 receptors are present as monomers in the plasma membrane with densities of only 1–2 receptors μm⁻². In addition, binding of trimeric S proteins does not induce the formation of ACE2 oligomers in the plasma membrane. Supported by infection studies using vesicular stomatitis virus (VSV) particles bearing S proteins our data demonstrate that a single S protein interaction per virus particle with a monomeric ACE2 receptor is sufficient for infection, which provides SARS-CoV-2 a high infectivity.     

Optimizing Membranes for Osmotic Power Generation

The design of ion-selective membranes is the key towards efficient reverse electrodialysis-based osmotic power conversion. The tradeoff between ion selectivity (output voltage) and ion permeability (output current) in existing porous membranes, however, limits the upgradation of power generation efficiency for practical applications. Thus, we provide the simple guidelines based on fundamentals of ion transport in nanofluidics for promoting osmotic power conversion. In addition, we discuss strategies for optimizing membrane performance through analysis of various material parameters in membrane design, such as pore size, surface charge, pore density, membrane thickness, ion pathway, pore order, and ionic diode effect. Lastly, a perspective on the future directions of membrane design to further maximize the efficiency of osmotic power conversion is outlined.     

Balancing the Crystallinity and Film Formation of Metal–Organic Framework Membranes through In Situ Modulation for Efficient Gas Separation

Polycrystalline metal–organic framework (MOF) layers hold great promise as molecular sieve membranes for efficient gas separation. Nevertheless, the high crystallinity tends to cause inter-crystalline defects/cracks in the nearby crystals, which makes crystalline porous materials face a great challenge in the fabrication of defect-free membranes. Herein, for the first time, we demonstrate the balance between crystallinity and film formation of MOF membrane through a facile in situ modulation strategy. Monocarboxylic acid was introduced as a modulator to regulate the crystallinity via competitive complexation and thus concomitantly control the film-forming state during membrane growth. Through adjusting the ratio of modulator acid/linker acid, an appropriate balance between this structural “trade-off” was achieved. The resulting MOF membrane with moderate crystallinity and coherent morphology exhibits molecular sieving for H₂/CO₂ separation with selectivity up to 82.5.     

Modular Customization and Regulation of Metal–Organic Frameworks for Efficient Membrane Separations

Metal–organic frameworks (MOFs) are considered ideal membrane candidates for energy-efficient separations. However, the MOF membrane amount to date is only a drop in the bucket compared to the material collections. The fabrication of an arbitrary MOF membrane exhibiting inherent separation capacity of the material remains a long-standing challenge. Herein, we report a MOF modular customization strategy by employing four MOFs with diverse structures and physicochemical properties and achieving innovative defect-free membranes for efficient separation validation. Each membrane fully displays the separation potential according to the MOF pore/channel microenvironment, and consequently, an intriguing H₂/CO₂ separation performance sequence is achieved (separation factor of 1656–5.4, H₂ permeance of 964–2745 gas permeation unit). Taking advantage of this strategy, separation performance can be manipulated by a non-destructive modification separately towards the MOF module. This work establishes a universal full-chain demonstration for membrane fabrication-separation validation-microstructure modification and opens an avenue for exclusive customization of membranes for important separations.     

分子筛膜反应器的研究进展

分子筛膜具有规整的微孔结构(<1 nm), 耐高温高压、 抗有机溶剂, 在液相和气相小分子分离中受到广泛关注. 分子筛膜可以与催化反应耦合于一体构成膜反应器, 使反应过程与组分分离同时进行, 促进反应平衡移动, 达到反应强化的效果. 本文概述了近十年不同类型分子筛膜反应器在催化反应中的应用研究进展, 并对分子筛膜反应器未来的发展趋势进行了展望.     

微纳米纤维素功能膜在能源与环境领域的应用

探寻绿色清洁的资源与材料以维持高效的社会经济增长是未来数十年人们面临的最大挑战之一. 可持续资源与绿色材料的开发是降低传统化石能源与材料比重的最有前途的方案. 纤维素作为一种可持续发展、 可生物再生、 储量丰富且低成本的天然高分子聚合物, 在众多领域中具有广泛的应用, 并且纤维素可以加工成各种构型, 包括气凝胶、 泡沫、 海绵和薄膜等. 本文介绍了不同形态的纤维素及其衍生物组装而成的功能膜在能源与环境中的应用, 综述了微纳米纤维素及其衍生物在先进功能化储能器件方面的最新进展和制备方案, 以及在用于水处理的膜分离技术中的应用, 其中重点讨论了微纳米纤维素及其衍生物功能膜在电池、 电容器及水处理等领域中的作用, 如隔膜、 柔性电极膜和分离膜等. 此外, 还对纤维素及其衍生物功能膜的未来发展进行了总结和展望.     

Discussion of the protein characterization techniques used in the identification of membrane protein targets corresponding to tumor cell aptamers

Aptamer is an oligonucleotide chain with specific binding ability to protein and other targets,which is widely used in ma ny fields.Because of its ability to screen the premise of unknown targets,it can be used to discover some novel tumor markers,i.e.,membrane proteins that are specifically highly expressed on the surface of tumor cells.Tumor markers can be used in many fields such as early diagnosis and treatment,and a new type of tumor marker proved to be effective can significantly improve the therapeutic effect of such tumors.However,further characterization of newly acquired membrane proteins is essential for their clinical use as tumor markers.This review first briefly introduced the process of obtaining novel tumor markers from nucleic acid aptamers.Next,the commonly used protein characterization methods could be used as a technical means to identify membrane protein targets corresponding to tumor cell aptamers,to clarify the principles,advantages and disadvantages of various means,and to analyze the most suitable situations for various experimental methods.Finally,the outlook was made and the characterization methods that should be used in such experiments were summarized.