氪灯和氙灯光谱强度分布和光谱效率测量

氪灯、氙灯光谱强度分布和光谱效率测量是反映氪灯、氙灯性能的关键指标。介绍了一套新型的氪灯、氙灯光谱强度分布和光谱效率检测系统。该系统是一套测量连续发光灯和脉冲闪光灯发光性能及效果的综合检测设备。该检测单元采用计算机进行操控,人机界面良好,便于检验人员进行氪灯和氙灯光谱强度分布和光谱效率的批量检测。检验人员利用该系统可进行装机模拟试验和可靠性试验,可对氪灯和氙灯的性能进行必要的分析研究,不断地积累了氪灯和氙灯的检验数据和经验。     

Electron-phonon interaction in tetrahedral semiconductors

Considerable progress has been made in recent years in the field of ab initio calculations of electronic band structures of semiconductors and insulators. The one-electron states (and the concomitant two-particle excitations) have been obtained without adjustable parameters, with a high degree of reliability. Also, more recently, the electron-hole excitation frequencies responsible for optical spectra have been calculated. These calculations, however, are performed with the constituent atoms fixed in their crystallographic positions and thus neglect the effects of the lattice vibrations (i.e. electron-phonon interaction) which can be rather large, even larger than the error bars assumed for ab initio calculations.Effects of electron-phonon interactions on the band structure can be experimentally investigated in detail by measuring the temperature dependence of energy gaps or critical points (van Hove singularities) of the optical excitation spectra. These studies have been complemented in recent years by observing the dependence of such spectra on isotopic mass whenever different stable isotopes of a given atom are available at affordable prices. In crystals composed of different atoms, the effect of the vibration of each separate atom can thus be investigated by isotopic substitution. Because of the zero-point vibrations, such effects are present even at zero temperature (T=0).In this paper, we discuss state-of-the-art calculations of the dielectric function spectra and compare them with experimental results, with emphasis on the differences introduced by the electron-phonon interaction. The temperature dependence of various optical parameters will be described by means of one or two (in a few cases three) Einstein oscillators, except at the lowest temperatures where the T⁴ law (contrary to the Varshni T² result) will be shown to apply. Increasing an isotopic mass increases the energy gaps, except in the case of monovalent Cu (e.g. CuCl) and possibly Ag (e.g. AgGaS₂). It will be shown that the gaps of tetrahedral materials containing an element of the first row of the periodic table (C,N,O) are strongly affected by the electron-phonon interaction. It will be conjectured that this effect is related to the superconductivity recently observed in heavily boron-doped carbon.     

Polar oscillation and dispersion properties of quasi-confined optical phonon modes in a wurtzite GaN/AlxGa1−xN nanowire

Under the dielectric continuum model and Loudon’s uniaxial crystal model, the properties of the quasi-confined (QC) optical phonon dispersions and the electron-QC phonons coupling functions in a cylindrical wurtzite nanowire are deduced via the method of electrostatic potential expanding. Numerical computations on a GaN/Al_0.15Ga_0.85N wurtzite nanowire are performed. Results reveal that, for a definite axial wave number k_z and a certain azimuthal quantum number m, there are infinite branches of QC modes. The frequencies of these QC modes fall into two regions, i.e. a high frequency region and a low frequency region. The dispersion of the QC modes are quite apparant only when k_z and m are small. The lower-order QC modes in the higher frequency region play more important role in the electron-QC phonon interactions. Moreover, for the higher-order QC modes in the high frequency region, the electrostatic potentials “escaping” out of the well-layer material nearly could be ignored.     

Birefringent filter with amplitude beats

In this work, we show a very simple birefringent filter useful to modulate a broadband light spectrum. We first show the generation of various oscillating spectra using two identical multiple-order waveplates. In particular a sinusoidal broadband spectrum with a rapid oscillation is obtained. This spectrum is amplitude modulated by adding another waveplate to the system. This waveplate has a small phase shift, and with the proper orientation generates amplitude beats on the broadband spectrum. Finally, we show how this system can be voltage controlled by means of a ferroelectric liquid crystal modulator. We experimentally demonstrate this behavior with the aid of a portable spectrophotometer, and we provide a theoretical explanation on the basis of the Jones matrix formalism.     

Fuchs-Kliewer phonon spectrum of Co3O4(110) single crystal surfaces by high resolution electron energy loss spectroscopy

The Fuchs-Kliewer phonon spectrum of single crystal Co₃O₄(110) has been analyzed by high resolution electron energy loss spectroscopy (HREELS) and the four fundamental phonon losses have been identified at 26.8, 47.5, 71.1 and 84.7 meV (216, 383, 573 and 683 cm⁻¹). This is the first HREELS study reported for an intrinsic spinel single-crystal surface with primary focus on the Fuchs-Kliewer phonon structure. The Co₃O₄ crystal is first characterized by Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and low-energy electron diffraction (LEED), which establish the composition, cleanliness, and order of the (110) surface. Electron scattering is then used to obtain a series of well-resolved Fuchs-Kliewer phonon spectra over 2.25-14.25 eV incident electron energy range. The variation in phonon intensity with primary beam energy is shown to agree with that predicted by dielectric theory.     

XeF和KrF的热催化合成及KrF在含氟高能氧化剂NFBF合成中的应用

本文介绍了一种以氟气和惰性气体为原料合成 Kr F2 和 Xe F2 的热催化合成方法并对合成机理和条件作了简单的讨论 ,利用合成的 Kr F2 作为氟化剂合成了含氟高能氧化剂 NF4BF4,纯度约为 93%,其红外光谱和拉曼光谱基本与文献值吻合。元素分析结果表明产品 NF4BF4中含 B5.8%(mass) ,自由氟原子含量为 9.95%(mass) ,与理论值基本一致 ,此结果也间接证明了 Kr F2 质量的可靠性。粉末状的 Xe F2 经升华 -再结晶纯化后可得纯净晶体产品。     

Ab initio study of Rg2I− (Rg = Ar,Kr, Xe)

The equilibrium geometries, vibrational frequencies, and dissociation energies of rare gas iodine clusters Rg₂I^?(Rg = Ar, Kr, Xe) were calculated at the Hartree–Fock (HF), second‐order Møller–Plesset (MP2), the coupled cluster method with single and double excitation and a noniterative correction for triple excitations method [CCSD(T)] levels. The title species have bent C_2v structure of about 60° angle. The electron correlation effects and relativistic effects on the geometry and stability were investigated at CCSD(T) level. Both effects stabilize title species. The calculated electron affinities are in good agreement with the experimental results available. The effect of high angular momentum functions (g and h) was studied. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

LGP pattern design with single LED light source

We investigated optimize pattern design of a LGP for TFT-LCD with single LED. For the purpose, we introduced new concepts of pattern design most appropriate design for single light source, density adjustment design and radius adjustment design. And than compared the LGP output intensity distribution of the two cases with that of the uniform density pattern. As the result, above two types pattern design given a good result. Especially, the radius adjustment pattern design enhanced intensity uniformity definitely.     

Tailoring Pore Structure and Morphologies in Covalent Organic Frameworks for Xe/Kr Capture and Separation

As a rising star among porous solid materials, covalent organic frameworks(COFs) with excellent properties including but not limit to facilely controllable structure, high porosity, and multi-chemical functionality represent significant potential for efficient ¹²⁷Xe/⁸⁵Kr capture and separation. In this study, through tuning the length of the organic ligands, two-dimensional(2D) COF mate-rials with identical connection group but different pore properties, denoted as ATFG-COF and TpPa-COF with AA-stacking model and TpBD-COF with AB-stacking model were synthesized and tested for Kr and Xe adsorption for the first time. Adsorption measurements indicate that the narrower pore apertures and higher porosity are conducive for COF materials to capture Xe and Kr. Furthermore, the Henry's constant, isosteric heat of adsorption(Q_st), and ideal adsorbed solution theory(IAST) selectivity of ATFG-COF, the pore size of which is closest to the kinetic diameter of the Xe atom(0.41 nm) among 2D COF materials, were carried out based on the single component sorption isotherms. The results illustrate that the high isosteric heat values of Xe/Kr adsorption on ATFG-COF are 25 and 16 kJ/mol at room temperature, respectively. Henry's law predicts that the selectivity factor of Xe to Kr is 6.07, consistent with the adsorption selectivity(ca. 6) calculated based on the IAST.     

Novel technique for the measurement of fiber dispersion properties

We present a novel method for measuring the linear and nonlinear dispersion properties of conventional and micro-structured fibers. It is based on the automated compensation of phase modulations using a high-resolution pulse-shaping device. No tunable laser source is required. Received: 20 December 2002 / Published online: 19 March 2003 RID="*" ID="*"Corresponding author. Fax: +49-3641/947202, E-mail: stobrawa@ioq.uni-jena.de RID="**" ID="**"Present address: Carl Zeiss Meditec AG, G?schwitzer Strasse 51–52, 07745 Jena, Germany