Sediment Matrix Induced Response Enhancement in the Gas Chromatographic–Mass Spectrometric Quantification of Insecticides in Four Different Solvent Extracts from Ultrasonic and Soxhlet Extraction

The performance of ultrasonic and Soxhlet extraction using hexane, dichloromethane, ethylacetate/methyl-tert-butylether (1/3, v/v) and hexane/acetone (1/1, v/v) for the analysis of seventeen insecticides in sediments was evaluated. The contents of the extracts differed severely. The extracts obtained with ethylacetate/methyl-tert-butylether (1/3, v/v) and hexane/acetone (1/1, v/v) were dark yellow to green, whereas the extracts obtained with dichloromethane and hexane were light yellow and clear respectively. This is due to higher solubility of matrix compounds in ethylacetate/methyl-tert-butylether (1/3, v/v) and hexane/acetone (1/1, v/v). High loads of coextracted matrix compounds lead to matrix effects in the evaporation step of GC–MS measurements. This is known as matrix induced response enhancement effect. Matrix effects and recoveries were checked by analysis of spiked sediments. The suitable choice of extraction method in connection with an appropriate solvent separates the analytes from matrix compounds. Matrix effects are reduced and recoveries of spiked samples are improved.Revised: 6 January and 2 May 2005     

QSAR and mode of action studies of insecticidal ecdysone agonists†

A series of our SAR and QSAR studies of synthetic moulting hormone agonists, dibenzoylhydrazines (DBH), exhibiting insecticidal/larvicidal activity are reviewed in this article. We prepared a number of analogues where various substituents are introduced into the two benzene rings of DBH and measured their biological activity using various biological systems. Larvicidal activity was against larvae of the rice stem borer Chilo suppressalis and the moulting hormone activity was in terms of the stimulation of N-acetylglucosamine incorporation in a cultured integument system of the same insect species. Binding affinity to the ecdysone receptor was assayed with intact Sf-9 cell lines in which the ADME processes are negligible as well as using receptor proteins obtained by in vitro translation of the responsible cDNA cloned from cell-free preparation of integumentary tissue of C. suppressalis. Variations in the biological activity indices were either correlated between two types of activity or correlated using physicochemical molecular and substituent parameters in terms of the classical QSAR. Comparisons among correlations and with recently revealed X-ray crystallographic findings clearly indicate the physicochemical meaning of parameters significant in the correlation equations to help understanding molecular mechanism of the moulting hormonal action.     

Synergetic recognition and separation of kelthane and pyridaben base on magnetic molecularly imprinted polymer nanospheres

We present novel magnetic composite nanospheres for the preparation of a nanoiron oxide/carbon dots/β‐cyclodextrin/molecularly imprinted polymer for the selective solid‐phase extraction kelthane and pyridaben from vegetables. The molecularly imprinted polymer was synthesized on the surface of nano‐iron oxide/carbon dots via a chemical polymerization procedure, where kelthane‐β‐cyclodextrin and pyridaben‐β‐cyclodextrin inclusion complexes were used as template molecules, and their adsorption behavior was investigated in detail. Characterization analysis and binding experiments revealed that magnetic composite nanospheres had outstanding magnetic properties, a large adsorption capacity, and high competitive selectivity for kelthane and pyridaben. The magnetic composite nanospheres were employed as an adsorbent in solid‐phase extraction for the determination of kelthane and pyridaben in vegetable samples. The recoveries of kelthane and pyridaben were 92.8–105.2 and 94.4–104.6%, respectively.     

The Development of Modern Pesticides

IntroductionAt present,over80 0 different compounds areavailable for being used as pesticides[1] oragrochemicals[2 ] . Insecticides,fungicides,andherbicides constitute the largest groups but othertypes that are listed include acaricides,additives,algicides,attractants,bactericides,growthregulators,molluscicides,nematicides,repellents,rodenticides,safeners,soil sterilants,synergists,and wood protectants.The worldwide consumptionof pesticides is indicated by the level of sales in thelast decade …     

Chirality and Crop Protection

The modern agrochemical industry is searching, more intensively than ever, for new substances to combat pests (weeds, deleterious insects, plant pathogens, etc.). In the complex and costly selection and optimization process, state-of-the-art scientific methods are always needed. The aims of the interdisciplinary optimization are mainly the reduction of the rate of application of the new substance, an increase in the selectivity against the target organism, and the optimal ecological profile. If a promising crop protection compound is a racemate or a diastereoisomeric mixture, the chemist has a unique opportunity to contribute to this optimization process through the synthesis of enantiomerically pure isomers for testing purposes. If the single isomer proves to be biologically superior to the racemate, the development of an economical and ecologically sound process for the production of the single isomer presents an even greater challenge. The average price of a crop protection compound is much lower than that for a pharmaceutical product, and this fact imposes a severe limitation upon the flexibility of the chemist who is concerned with the synthesis and production of a stereochemically pure agrochemical. This forces the crop protection chemist to make full use of both his scientific and creative capabilities. Fortunately, parallel to the development of the above optimization aims of a modern and ecologically sound crop protection research, there has been a continuous and worldwide advance in the area of asymmetric synthesis. Due to the interplay of these two parallel efforts there has been a great accumulation of chemical, biological, and agronomical knowledge in recent years, which should have implications beyond merely the synthesis of enantiomerically pure agrochemicals.     

N-(2,6-Dihalobenzoyl)-N′-pyrimidinylharnstoffe

N-(2,6-Dichlorobenzoyl)- and N-(2,6-difluorobenzoyl)-N-pyrimidinylureas3b–3n have been synthesized by reaction of the corresponding aminopyrimidine derivatives with 2,6-dichlorobenzoyl isocyanate or 2,6-difluorobenzoyl isocyanate. The insecticidal activity of compounds3b–3n has been evaluated.

     

NEMATICIDAL,INSECTICIDAL, ANTIFERTILITY,ANTIFUNGAL AND ANTIBACTERIAL ACTIVITIES OF SALICYLANILIDE SULPHATHIAZOLE AND ITS MANGANESE,SILICON AND TIN COMPLEXES

A facile synthesis and studies on the stereochemistry and biochemical aspects of some organosilicon(IV), organotin(IV), and manganese(II) complexes derived from imine having N^∪N^∪O donor system is reported. The imine was prepared by the condensation of salicylanilide with sulphathiazole. This imine reacts with organosilicon(IV)chloride, organotin(IV)chloride, and hydrated manganese(II) chloride to yield compounds having M─O and M←N bonds. The structures of the compounds have been elucidated by physicochemical and spectral (IR, ¹H NMR, ¹³C NMR, ²⁹Si NMR, ¹¹⁹Sn NMR, and ESR) studies, which clearly point to a trigonal bipyramidal geometry around silicon(IV) and tin(IV), and tetrahedral geometry around manganese(II), as the active lone pair of the nitrogen is also included in the coordination sphere. In the search for better fungicides and bactericides, studies were conducted to assess the growth-inhibiting potential of the synthesized complexes against various pathogenic fungal and bacterial strains. These complexes are highly active against nematode (Meloidogyneincognita) and insect (Trogodermagranarium). The activity will be increased with increasing concentration. These studies demonstrate that the concentrations reached levels that are sufficient to inhibit and kill the pathogens. All compounds have also been found to act as sterilizing agents by reducing the production of sperm in male mice.     

Preconcentration and separation of some organic water pollutants with polyurethane foam and activated carbon

Summary Although pesticides and phenols, cause reproductive failure in many areas of the world, there is a no effective means of treating waste water containing these compounds. This work deals with the adsorption of insecticides and phenols from aqueous solution by untreated porous polyurethane foam and activated carbon. Static experiments showed that in comparison with activated carbon a reasonable percentage of the compounds was adsorbed by the foam. Attempts were therefore made to extract these species from aqueous solution by foam column chromatography.The results showed that the adsorption of the compounds was brought about by a mechanism similar to that of solvent extraction. The effect of various experimental conditions such as temperature, extracting medium, pH, contact time, volume of sample flow rate, compound concentration, and eluting solvents on the retention and separation of the compounds has been determined. The height equivalent to a theoretical plate (HETP) was calculated from breakthrough capacity curves and from chromatograms obtained from polyurethane foam columns for the insecticide Dyfonate; values were in the range 2.1–2.3 mm at 10–15 ml min^–1. Extraction of the compounds from natural water, and subsequent recovery, were both found to be complete. The high capacity of polyurethane provides advantages over activated carbon; in particular, large sample volumes can be analyzed at high flow rates.     

Study of preparation and adsorption properties of imidacloprid mesoporous surface molecularly imprinted polymerEI北大核心CSCD

Imidacloprid mesoporous surface molecularly imprinted polymer (MIP) was rapidly synthesized by one[1]step method, with imidacloprid as template molecule, methacrylic acid (MAA) as functional monomer, azodiisobutyronitrile (AIBN) as initiator and ethylene glycol dimethacrylate (EGDMA) as crosslinker. The characterization of MIP was completed by SEM, TEM, FT-IR, and nitrogen adsorption-desorption isotherms. The adsorption conditions were optimized. At the imidacloprid concentration of 100 µg/mL, MIP reached adsorption saturation and the adsorption time was shorter than that of the corresponding non-imprinted polymer (NIP), with the saturated adsorption value of 3.628 mg/g, and the imprinting factor of 1.27, indicating that the mesoporous structure and surface imprinting improved the mass transfer rate of imidacloprid in the adsorption process, so as to improving the adsorption capacity. In addition, under the same conditions, the adsorption capacity of MIP for imidacloprid was higher than acetamiprid, thiacloprid and thiamethoxam, indicating that MIP had better specific recognition ability. The imidacloprid mesoporous surface MIP can be prepared simply and rapidly, which may be a potential material in the field of sample pretreatment and rapid detection. © 2023, Youke Publishing Co.,Ltd. All rights reserved.