Dynamics of excitons and carriers at the NPB/C60 interface by transient photocurrents

The transient photocurrent (TPC) technique was performed to explore the dynamics of excitons and carriers at organic active layer/buffer layer interfaces. A special device with ITO/PEIE/NPB/C₆₀/Al structure was designed to study the interfacial processes at the NPB/C₆₀ interface. An external electrical field was provided to neutralize the built-in electrical field of the device. Interestingly, a new phenomenon was observed, wherein the polarity of the TPC changed from negative to positive under an external electrical field. The initial negative signal was ascribed to exciton separation by the built-in field in C₆₀, and the subsequent positive signal can be attributed to the diffusion of electrons that accumulate at the NPB/C₆₀ interface. TPC measurements shown that further increasing the external electrical field causes polarity to change twice. Analyzing the two changes in polarity revealed that the NPB did not only extract holes from C₆₀ but also provided an effective interface for exciton dissociation.     

Dredging the Charge-Carrier Transfer Pathway for Efficient Low-Dimensional Ruddlesden-Popper Perovskite Solar Cells

Low-dimensional Ruddlesden-Popper (LDRP) perovskites still suffer from inferior carrier transport properties. Here, we demonstrate that efficient exciton dissociation and charge transfer can be achieved in LDRP perovskite by introducing γ-aminobutyric acid (GABA) as a spacer. The hydrogen bonding links adjacent spacing sheets in (GABA)₂MA₃Pb₄I₁₃ (MA=CH₃NH₃⁺), leading to the charges localized in the van der Waals gap, thereby constructing “charged-bridge” for charge transfer through the spacing region. Additionally, the polarized GABA weakens dielectric confinement, decreasing the (GABA)₂MA₃Pb₄I₁₃ exciton binding energy as low as ≈73 meV. Benefiting from these merits, the resultant GABA-based solar cell yields a champion power conversion efficiency (PCE) of 18.73 % with enhanced carrier transport properties. Furthermore, the unencapsulated device maintains 92.8 % of its initial PCE under continuous illumination after 1000 h and only lost 3 % of its initial PCE under 65 °C for 500 h.     

退火处理提高P3HT:PCBM聚合物太阳能电池光伏性能

利用旋转涂膜方法制备了以P3HT:PCBM为有源层的聚合物太阳能电池, 器件结构为ITO/PEDOT:PSS/P3HT:PCBM/Al(氧化铟锡导电玻璃/聚二氧乙基噻吩:聚对苯乙烯磺酸/聚三已基噻酚:富勒烯衍生物/铝),研究了退火温度对聚合物太阳能电池性能的影响. 实验发现: 聚合物薄膜经过120 °C退火10 min处理后, 开路电压(V_oc)达到0.64 V, 短路电流密度(J_sc)为10.25 mA·cm^-2, 填充因子(FF) 38.1%, 光电转换效率(PCE)达到2.00%. 为了讨论其内在机制, 对不同退火条件下聚合物薄膜进行了各种表征. 从紫外-可见吸收光谱中发现, 退火处理使P3HT在可见光范围内吸收加强且吸收峰展宽, 特别是在560和610 nm处的吸收强度明显增大; X射线衍射(XRD)结果表明, 120 °C退火后P3HT在(100)晶面上的衍射强度是未退火薄膜的2.8倍, 有利于光生载流子的输运; 原子力显微镜(AFM)研究结果表明, 退火显著增大了P3HT与PCBM的相分离程度, 提高了激子解离的几率; 傅里叶变换红外(FTIR)光谱验证了退火并没有引起聚合物材料物性的变化.     

Effects of Coverage,Water, and Defects on Catechol/TiO2 Interface

Catechol adsorbed on TiO₂ is one of the simplest models to explore the relevant properties of dye-sensitized solar cells. However, the effects of water and defects on the electronic levels and the excitonic properties of the catechol/TiO₂ interface have been rarely explored. Here, we investigate four catechol/TiO₂ interfaces aiming to study the influence of coverage, water, and defects on the electronic levels and the excitonic properties of the catechol/TiO₂ interface through the first-principles many-body Green's function theory. We find that the adsorption of catechol on the rutile (110) surface increases the energies of both the TiO₂ valence band maximum and conduction band minimum by approximately 0.7 eV. The increasing coverage and the presence of water can reduce the optical absorption of charge-transfer excitons with maximum oscillator strength. Regarding the reduced hydroxylated TiO₂ substrate, the conduction band minimum decreases greatly, resulting in a sub-bandgap of 2.51 eV. The exciton distributions in the four investigated interfaces can spread across several unit cells, especially for the hydroxylated TiO₂ substrate. Although the hydroxylated TiO₂ substrate leads to a lower open-circuit voltage, it may increase the separation between photogenerated electrons and holes and may therefore be beneficial for improving the photovoltaic efficiency by controlling its concentration. Our results may provide guidance for the design of highly efficient solar cells in future.     

Preparation of Zn(Cd)O:Ga–SiO2 composite scintillating materials

Composite material consisting of highly luminescent Zn(Cd)O:Ga powder embedded in the silica matrix was prepared. It was found out that ZnO:Ga with less developed crystals (i.e. annealed at lower temperatures) is more prone to interact with the SiO₂ matrix and form zinc silicates, which in turn resulted in the decrease in the excitonic emission. Pre-annealing of the powders at temperatures above 600 °C prevented the interaction with the SiO₂ matrix. ZnO:Ga with well-developed crystals at such a high temperatures was not affected by the matrix and retained its properties, i.e. high radioluminescence intensity and ultrafast sub nanosecond photoluminescence decay. Introducing Cd into the ZnO lattice caused observable red shift in the excitonic luminescence, without negatively affecting the total intensity or the decay.     

High-Density Excitons in a Diluted Magnetic Semiconductor: Cd 1 − x Mn x Te

Time-resolved magneto photoluminescence in a diluted magnetic semiconductor Cd 0.9 Mn 0.1 Te has been carried out with varying exciton density from 10 14 to 10 19 cm m 3 . The reduction of the Zeeman shift and that of the magnetic polaron energy was found under strong photoexcitation. The spectral feature is interpreted in terms of the heating of the manganese spin subsystem. Polarization dependence of the spin heating is observed for the first time, revealing the contribution of the spin flip between excitons and magnetic ions to the heating process.     

Relaxation Dynamics In Photo-Excited Halogen-Bridged Pt-Complexes Studied By Femtosecond Luminescence Spectroscopy

The ultrafast dynamics of excited electronic states in a series of quasi-one-dimensional halogen-bridged platinum-complexes was investigated by using femtosecond luminescence spectroscopy. In Pt-Br system, the wave-packet oscillation of the local vibration of self-trapped excitons (STEs) was observed. The time evolutions of luminescence intensity in Pt-Br and Pt-Cl were successfully described by using a model based on a wave-packet motion on the interaction mode coordinate. In Pt-I, very fast decay was observed, suggesting the existence of efficient non-radiative decay channel directing to structural change.     

Movement and amplification of exciton condensed phase pulses and interaction between pulses in semiconductor quantum wells

Formation and movement of an exciton pulse in an inhomogeneous potential are studied. It is shown that the pulse does not blur and the maximum of the exciton density in the pulse remains constant during the exciton lifetime if the pulse is formed from the condensed phase. The path, traversed by the excitons, can be increased by imposing an additional laser pulse on the system. Thereby, such a system can be used for information transmission over the exciton condensed phase.     

Singlet relaxation dynamics and long triplet lifetimes of thiophene-coupled perylene diimides dyads: New insights for high efficiency organic solar cells

In the active layer of organic solar cells (OSCs), the lifetime of triplet excitons is one of the decisive factors in the diffusion length and therefore has important impact on the power conversion efficiency of the devices. Herein, we have investigated singlet excited state relaxation dynamics and their triplet exciton lifetimes of two thiophene-coupled perylene diimides (PDI) dyads (2PDI-Th and fused-2PDI-Th), in order to provide a unique explanation in depth on their different performances in OSC devices. From the transient absorption (TA) spectra, the singlet excitons of 2PDI-Th form excimers in the time scale of 1.5 ps. Then the excimers go into the triplet state via intersystem crossing (ISC). In fused-2PDI-Th, triplet excitons are generated directly from the singlet excited excitons via the efficient ISC. Density functional theory (DFT) calculations further support the formation of excimers. DFT results indicate that 2PDI-Th exhibits an H-typed molecular configuration which is beneficial to form the excimers, while fused-2PDI-Th gives a twisted X-shaped configuration in the optimized ground and excited state. In steady-state emission spectra, 2PDI-Th shows abroad and featureless spectral characteristics of the excimers with a decay time of 840 ps, which is much shorter than those of PDI (5.5 ns) and fused-2PDI-Th (3.3 ns). The triplet lifetime (67 μs) of fused-2PDI-Th is factor of 3 longer than that of 2PDI-Th (22 μs). These results demonstrate that ring-fused structure is an efficient strategy to eliminate excimer formation and prolong the lifetime of triplet excitons, which provides a new insight for design of optoelectronic molecules for high efficiency organic solar cells.     

Energy transfer between excitons and plasmons in semiconductor-metal hybrid nanostructures

We summarized our recent optical studies on semiconductor nanoparticle (NP) based hybrid nanostructures: isolated CdSe NPs on Au substrates, close-packed CdSe NP monolayers on Au substrates, and close-packed monolayers of mixed CdSe/Au NPs. Luminescence properties of semiconductor-metal hybrid nanostructures were studied by space-resolved optical imaging spectroscopy and time-resolved luminescence spectroscopy. The luminescence spectra and dynamics of isolated and assembled NPs depend on the local environments. We discuss exciton-plasmon interactions in semiconductor-metal hybrid nanostructures.