Oxidation for unsymmetrical bromo-1,10-phenanthrolines and subsequent hydroxylation,decarbonylation and chlorination reactions

A systematic investigation on the oxidation of unsymmetric bromo-phens is presented herein, where the reaction temperature is found to be the key parameter to generate oxidation or oxidation-bromination products. The regioselective C3-brominated compounds are produced in moderate yields in the cases of 2-bromo-phen and 4-bromo-phen. Subsequent hydroxylation and decarbonylation for bromo-phds are also studied, where a series of bromo-diazafluorenones and phen-triones have been isolated. Furthermore, various chlorination products have been obtained by treating bromo-phds or bromo-phts with excess POCl₃.     

Facile synthesis of potassium tetrathiooxalate – The “true” monomer for the preparation of electron-conductive poly(nickel-ethylenetetrathiolate)

Herein, aiming at optimization of the polymerization process leading to a family of hole- and electron-conducting 1,1,2,2-ethenetetrathiolate-based polymers, such as poly(nickel-1,1,2,2-ethenetetrathiolate), poly[K_x(Ni-ett)], we investigated transformations of the monomer precursor 1,3,4,6-tetrathiapentalene-2,5-dione (TPD) occurring under polymerization conditions. We found that only one ring of TPD opens upon its reaction with potassium methoxide under inert conditions at room temperature which leads to the formation of potassium 2-oxo-1,3-dithiol-4,5-dithiolate (K₂[3]). Heating of K₂[3] under reflux in methanol solution under inert conditions opens the second ring, however the resulting product is not potassium ethenetetrathiolate (K₄[2]), the product of an exhaustive methanolysis of TPD, but potassium tetrathiooxalate (K₂[4]), the product of the decarbonylation of K₂[3]. Preliminary experiments reveal that the involvement of K₂[4] in the polymerization process is beneficial for reproducible formation of high quality 1,1,2,2-ethenetetrathiolate-based polymers suitable for thermoelectric applications.     

丙酸水相加氢反应中Ru负载量对C-C键断裂的影响

考察了（1.0、4.0、6.0 wt.%）Ru/ZrO2催化剂的丙酸水相加氢性能。采用N2物理吸附、CO脉冲化学吸附、H2程序升温还原（H2-TPR）、CO和丙酸吸附傅里叶变换红外光谱（FTIR）研究了Ru/ZrO2催化剂的物理化学性质。CO-FTIR表明,Ru负载量增加,催化剂表面Ru粒子的富电子程度增加,更接近金属Ru的本征特性。丙酸FTIR表明,丙酸分子在Ru/ZrO2催化剂表面经解离吸附主要形成丙酰基和丙酸盐物种。随Ru含量增加,丙酰基更容易发生脱羰反应,导致C-C键断裂。     

Intramolecular C-H insertion using NHC-di-rhodium(II) complexes: the influence of axial coordination

In this work we show that the intramolecular C-H insertion of diazo-acetamides catalysed by di-rhodium(II) complexes can be highly influenced by the axial ligand on the di-rhodium(II) complex. Axially monocoordinated NHC-Rh₂(OAc)₄ complexes have a distinct reactivity from the parent Rh₂(OAc)₄ complex affording the cyclisation products in different rates and selectivities. Surprisingly, a new reaction mode emerged when using these complexes which led to a decarbonylation pathway.     

Decarbonylative radical conjugate addition of aliphatic aldehydes for alkylation of electron-deficient alkenes

A convenient metal-free decarbonylative radical conjugate addition of aliphatic aldehydes to electron-deficient alkenes is developed. With DTBP as an oxidant and radical-initiator, this reaction smoothly converts α-unsubstituted, α-mono-substituted and α-di-substituted aliphatic aldehydes into the corresponding primary, secondary and tertiary alkyl radicals, and subsequently allows for the cascade construction of C(sp³)C(sp³) bond via radical conjugate addition.     

Photolytic decarbonylation of o-benzoquinones

It was established that photodecarbonylation of o-benzoquinones occurs by irradiation not only by UV-light, but visible light (λ>520 nm) too. Study of the series of 4,5-di-substituted 3,6-di-tert-butyl-o-benzoquinones detected that the only product of photoreaction is the corresponding 3,4-di-substituted 2,5-di-tert-butyl-cyclopentadienone, which is formed in a yield close to quantitative. NMR monitoring of reaction of photodecarbonylation of o-benzoquinones detected that this is a two-stage process. In the first stage the photoexcited molecule of quinone rearranges into bicyclo compound (bicyclo[1.3.0]hexa-3-en-2,6-dione) containing five- and three- membered cycles, which spontaneously decomposes during the following dark stage into cyclopentadienone and a molecule of CO.     

Acetaldehyde adsorption and catalytic decomposition on Pd(1 1 0) and the dissolution of carbon

The reaction of acetaldehyde with the Pd(1 1 0) surface has been studied using a molecular beam reactor, TPD and LEED. Below 270 K acetaldehyde sticks to the surface with a high initial probability (∼0.8), but no gas phase products evolve. When the reaction is run at >270 K, hydrogen evolves into the gas phase early in the reaction together with methane in a non-steady-state fashion, but above 300 K there is a very efficient steady-state catalytic reaction at the surface; this reaction is the decarbonylation of acetaldehyde to produce methane and carbon monoxide in the gas phase. This behaviour continues up to about 400 K. However, when acetaldehyde is dosed at 423 K, the reaction rate slowly evolves through a maximum to a very low catalytic rate. Upon carrying out reactor experiments at 473 K and above, the reaction mechanism changes to total dehydrogenation, and CO and H₂ are produced at high steady-state rate, not withstanding the fact that carbon is continually being deposited onto the surface. This carbon does not appear to affect the reaction, which takes place on a surface with a c(2 × 2)-C layer present, since the extra carbon is lost from the reaction zone by diffusion into the bulk of the crystal.     

糠醛脱羰用Pt-K/Al2O3催化剂制备研究--浸渍溶剂的影响

选用丙酮，乙醇、水、乙酸等4种不同溶剂，采用浸渍法制备Pt-K/Al2O3催化剂，电镜分析表明，Pt的分布，分散度与溶剂存在一定关系，且由于助剂K的添加，使Pt浓度的最大值并不在外表面，而在外表面之下；Pt-K/Al2O3的催化性能与Pt的分布，分散度及Pt/K比值有一定关系，当以乙醇为浸渍溶剂时，制备得到的催化剂催化性能最好。     

Synthesis of a cyclic dinuclear organotin carboxylate via simultaneous debenzylation and decarbonylation reactions: X-ray crystal structure of [(PhCH2)2{O2CC6H4{N(H)N(C6H3-4(O)-5-O)}-o}Sn]2

The complex, [(PhCH₂)₂{O₂CC₆H₄{N(H)N(C₆H₃-4(O)-5-O)}-o}Sn]₂ (1), is obtained as the exclusive reaction product from the reaction of sodium 2-[(E)-2-(3-formyl-4-hydroxyphenyl)-1-diazenyl]benzoate and (PhCH₂)₃SnCl. The reaction possibly proceeds via Dakin type rearrangements where arylazosalicylaldehyde is oxidized to arylazocatechol, followed by facile Sn-C bond cleavage. Complete assignments were achieved by ¹H, ¹³C, 2D ¹H-¹¹⁹Sn HMQC (¹¹⁹Sn chemical shift), 1D gs ¹H-¹⁵N HMQC (¹J(¹⁵N, ¹H) coupling constant) NMR and ESI-MS. The crystal structure of compound 1 as determined by X-ray diffraction analyses shows a cyclic centrosymmetric dinuclear moiety linked into extended chains by pairs of long Sn?O contacts of approximately 3.2 Å. Two polymorphs were identified and their structures differ primarily in the packing arrangement afforded by the benzyl groups. In one polymorph, when viewed along the Sn?Sn vector, the benzyl groups at each Sn-atom are oriented to form an S-shape, while they form a U-shape in the second polymorph.     

Synthesis of dipyrrolo[2,3-a:1′,2′,3′-fg]acridin-12(1H)-ones

Acylation reactions of 4,6-dimethoxyindoles with glyoxyloyl chlorides were achieved by the use of graphite powder in 1,2-dichloroethane at reflux. The products were monoketones as a result of decarbonylation, rather than the expected 1,2-diketones. Treatment of these monoketones with base led to their cyclisation and elimination of methanol to afford the novel dipyrrolo[2.3-a:1′,2′,3′-fg]acridin-12(1H)-ones.