不同金属反离子对含高效氯氟氰菊酯微乳液形成规律及其稳定性的研究

将十二烷基苯磺酸盐和苯乙烯化苯酚聚氧乙烯醚按摩尔比1∶1混合后, 结合5种金属反离子配成增溶高效氯氟氰菊酯的载药微乳体系, 研究其在导电机理、相行为及热贮稳定性上的差异. 结果表明, K+和Na+的十二烷基苯磺酸盐易于形成O/W型微乳液, Li+次之, Ca2+和Mg2+的十二烷基苯磺酸盐, 不利于形成O/W型微乳液.     

Ionic conductivity of poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium)] salts with univalent counter-ions in aqueous solutions

In order to determine the counter-anion effect on conductivity of poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium)] backbone in aqueous solutions, a set of three polyelectrolytes with three different counter-ions: poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium]bromide P4VP164Br and its chlorate and tosylate derivatives P4VP164ClO₄ and P4VP164Ts respectively, were prepared by spontaneous polymerization of 4-vinylpyridine. This method gives a grafted polyelectrolyte having a positive charge on each pyridinic moiety on the backbone. The conductivities of cationic polyelectrolyte aqueous solution were determined in the concentration range from 10⁻⁴ to 10⁻² M at 25 °C. The variation of the conductivity versus concentration of the investigated system exhibits a typical polyelectrolyte behavior. The polycation mobility was found to be dependent on the counter-anion nature. Thus, the polyelectrolyte conductivity increases with the ion size. This shows that big ions are weakly or not associated to the backbone.In order to confirm this steric hindrance, we have considered the conductivities of these three anions Br⁻, ClO₄⁻ and Ts⁻ in their sodium salts, both alone and in the presence of 3,6,9-trioxadecanol (PEO164) free chains. In the two cases, the conductivities decrease in the order Λ_Br>Λ_ClO4>Λ_Ts.These results suggest that counter-ion mobility is mainly influenced by steric effect PEO164 grafted chains.Values of the conductivity predicted from Manning rod-like polyelectrolyte model were compared with our experimental results.     

Cu(I) catalysed cyclopropanation of olefins: Stereoselectivity studies with Arylid-Box and Isbut-Box ligands

In our quest to find new ligands for highly stereoselective reactions, we tested a variety of chiral non-racemic pseudo-C₂ symmetric bis-oxazolines derived from malonic acid containing an arylidene bridge unit (and appropriately termed Arylid-Box) in the catalytic asymmetric cyclopropanation (CAP) reaction of styrene and ethyl diazoacetate using between only 1-2 mol% of a Cu(I) pre-catalyst. Some very good e.e.s (up to 86%), were obtained. It was possible to isolate 10a′-[Cu(CH₃CN)₄]PF₆ which existed as a bench stable solid that proved to be more efficient than the catalyst prepared in situ. Cu(I) pre-catalysts were used for the first time in the CAP reaction with the Isbut-Box ligands 13a and 13b and, although, the e.e.s were better for ligand 13a using these pre-catalysts, in the case of ligand 11b this was not the case. Spectroscopic studies (UV-Vis and ¹H NMR) were carried out to gain an insight into the nature of the catalytic species at work so that the conditions could be optimised giving better results. Some theoretical studies were conducted to try to explain the better enantioselectivities obtained using Evans’ tert-Box-Cu(I) complex over our complex.     

Sonochemical degradation of surfactants with different charge types: Effect of the critical micelle concentration in the interfacial region of the cavity

Ionic surfactants tend to accumulate in the interfacial region of ultrasonic cavitation bubbles (cavities) because of their surface active properties and because they are difficult to evaporate in cavitation bubbles owing to their extremely low volatilities. Hence, sonolysis of ionic surfactants is expected to occur in the interfacial region of the cavity. In this study, we performed sonochemical degradation of surfactants with different charge types: anionic, cationic, zwitterionic, and nonionic. We then estimated the degradation rates of the surfactants to clarify the surfactant behavior in the interfacial region of cavitation bubbles. For all of the surfactants investigated, the degradation rate increased with increasing initial bulk concentration and reached a maximum value. The initial bulk concentration to obtain the maximum degradation rate had a positive correlation with the critical micelle concentration (cmc). The initial bulk concentrations of the anionic surfactants were lower than their cmcs, while those of the cationic surfactants were higher than their cmcs. These results can be explained by the negatively charged cavity surface and the effect of the coexisting counterions of the surfactants.     

Preparation and properties of waterborne polyurethane–urea anionomers—influences of the type of neutralizing agent and chain extender

Waterborne polyurethane–urea anionomers were prepared by polyaddition reaction using isophorone diisocyanate (IPDI), poly(tetramethylene ether) glycol (PTMG, Mn=1000), dimethylolbutanoic acid (DMBA), and hydrazine monohydrate (HD), ethylene diamine (EDA), 1,4-butane diamine (BDA) as a chain extender, followed by neutralization of pendant COOH groups by NH₄OH/Cu(OH)₂ or triethylamine (TEA) as a neutralizing agent. The effects of the types of neutralizing agent such as NH₄OH/Cu(OH)₂ and TEA with various chain extenders on the properties of waterborne polyurethane–urea ionomers were investigated. Two loss modulus peaks for all samples are observed owing to the glass transition temperature of soft segments (Tg_s) and the glass transition temperature of hard segments (Tg_h). The conductivity, Tg_h, Tg, and tensile strength/modulus of TEA-based samples increased in the order of BDA>EDA>HD; however, those of NH₄OH/Cu(OH)₂-based samples increased in the order of HD>EDA>BDA. TEA-based film samples were found to have higher thermal stability, Tg_h, Tg, tensile strength/modulus, and storage modulus than NH₄OH/Cu(OH)₂-based ones at the same chain extender. On the other hand NH₄OH/Cu(OH)₂-based samples had higher conductivity and stronger antibacterial halo than TEA-based samples.     

Colloidal chemistry as a guide to design intended dispersions of carbon nanomaterials

In this review, some established concepts from Colloidal Science and their application to graphene and carbon nanotubes dispersions in organic or aqueous media are highlighted to rationalize alternatives for some issues in terms of colloidal properties. Recent applications for carbon-based dispersions are presented, as well as van der Waals interactions in carbon materials and strategies to overcome these interactions, such as increasing electrostatic repulsion between dispersed particles, surface functionalization, or adsorption of passivation agents such as macromolecules, which are the basis of many dispersion and exfoliation procedures. The demonstration of how knowledge and fine control of colloidal interactions have been used to overcome several limitations, such as the preparation of stable and concentrated dispersions of carbon materials and keeping appreciable electrical conductivity, is presented. It is also showed that the same knowledge can help the development of more environmentally friendly carbon-based colloids as well as the improvement of similar systems as dispersions of two-dimensional materials.     

Friedel-Crafts reactions in ionic liquids: the counter-ion effect on the dealkylation and acylation of methyl dehydroabietate

Ionic liquids with different counter-ion and alkyl substitutes were tested as solvents in the dealkylation and acylation of methyl dehydroabietate, a useful and inexpensive building block for the synthesis of higher diterpenes derivatives. Ionic liquids with halogen counter-ions are very active in both reactions with high rate constant and conversion, avoiding the use of the conventional solvents (benzene and carbon disulfide) in these reactions. In the dealkylation reaction, the change of counter-ion from halogens to tetrafluoroborate had a dramatic effect on the stereoselectivity, showing the importance of the counter-ion in the course of the reactions.     

Self-assembly of fatty acids in the presence of amines and cationic components

Fatty acids can self-assemble under various shapes in the presence of amines or cationic components. We assemble and compare these types of self-assembly leading toward a catanionic system either with a cationic surfactant or with an amine component playing the role of counter-ion. First, we focus on the molar ratio as a key driving parameter. Known and yet un-known values from other quantities governing the colloidal properties of these systems such as structural surface charge, osmotic pressure, molecular segregation, rigidity, in plane colloidal interactions and melting transition are discussed. We include also recent results obtained on the interfacial and foaming properties of these systems. We will highlight the specificity of these self-assemblies leading to unusual macroscopic properties rich of robust applications.     

A critical and comprehensive assessment of interfacial and bulk properties of aqueous binary mixtures of anionic surfactants, sodium dodecylsulfate, and sodium dodecylbenzenesulfonate

The micellization of mixed binary surfactant systems of sodium dodecylsulfate (SDS) and sodium dodecylbenzenesulfonate (SDBS) has been studied by conductometry, tensiometry, fluorimetry, and microcalorimetry at different mole fractional compositions. The counter-ion binding of micelles, micellar aggregation number, thermodynamics of micellization, interaction of components in the mixed micelles, and their compositions therein and amphiphile packing in micelles have been examined. The adsorption features of the surfactants at the air/solution interface have also been estimated. Correlation of the results and explanations of the findings have been presented. The difference in the head groups of SDS and SDBS has manifested interesting solution and interfacial behaviors.