痕量K元素对煤基碳材料NOx低温吸附功能的影响机理

本研究选取准东煤为碳材料前驱体，以水热耦合痕量K元素的方法对其进行活化。通过实验探究K质量浓度对碳吸附性能的影响，同时系统研究了材料的NO_x低温吸附性能。实验结果表明，活化液中K₂CO₃质量浓度为0.0067g/mL时，所制得的样品对NO_x的吸附性能较好，其饱和NO_x吸附时间为3200 s。通过低温N₂物理吸附研究发现，该质量浓度下样品的孔结构发展较好，比表面积达到708.6 m²/g。此外，本研究通过XPS、SEM等手段对不同质量浓度K₂CO₃活化的碳基材料进行了物化表征，并对不同质量浓度K₂CO₃活化制备的样品进行了表面性质分析，通过FT-IR对样品表面的吸附过程进行研究，发现准东煤基碳材料优良的吸附性能与表面结构相关，研究中采用DFT手段对反应机理进行验证，结果表明，K可促进C-O键的形成，而活性C-O结构是促进NO_x吸...     

射频等离子制备石墨烯负载Co3O4催化剂及其析氧性能研究

氢能的引入能有效提升配电网的供电可靠性,而电解水制氢是实现低碳转型的关键技术,开发高效的电解水催化剂势在必行。过渡金属氧化物储量大、催化活性高,是具有广阔应用前景的析氧反应催化剂。本文通过射频等离子体处理制备石墨烯上负载Co₃O₄析氧催化剂,XRD、Raman和XPS测试结果显示,二维结构石墨烯的引入加速表面电子迁移,增大了反应面积。等离子体处理促进了纳米粒子在石墨烯上的负载,利用等离子体刻蚀作用在催化剂表面制造出大量碳结构缺陷和氧空位结构,改善了活性位点分布,有效调控Co₃O₄电子结构,提高析氧催化活性。电化学测试表明,本文中合成的Co₃O₄@rGO在电流密度为50 mA·cm^-2时的过电位为410 mV,动力学反应速率较快,表现出优于商业IrO₂的析氧催化活性。     

1,3-丁二烯选择性加氢催化剂的设计策略以及构效关系

催化裂化是石油化工的核心单元之一.从催化裂化尾气中分离出来的碳四馏分富含许多的不饱和烯烃,如1-丁烯、顺、反式-2-丁烯以及少量的1,3-丁二烯,这些不饱和烯烃可以通过后续聚合反应,生成合成橡胶和工程塑料的重要原料,具有重要的应用价值.上述工艺过程对原料中1,3-丁二烯的含量(<100~200 ppm)有严苛的要求.采用选择性加氢技术对碳四馏分中的1,3-丁二烯进行选择性加氢,将其转化为更高附加值的单烯烃是一个理想的解决方案.然而,1,3-丁二烯加氢反应得到的单烯烃可能发生深度加氢得到副产物丁烷.因此,开发高效选择性加氢催化剂对碳四资源的利用具有重要的现实意义.另一方面,1,3-丁二烯加氢反应可以作为模型反应,用来考察选择性加氢催化剂的性能.基于此,该反应无论在工业界还是学术界均受到广泛关注.尽管如此,有关1,3-丁二烯加氢催化剂研究进展方面的综述极少.仅有关于1,3-丁二烯加氢作为模型反应的综述报道.本文对过去半个世纪以来1,3-丁二烯加氢反应中不同催化剂的发展历程进行系统综述,特别是包括Pd,Pt和Au等的单一贵金属催化剂.重点介绍以下内容:(1)固体催化剂构效关系,包括活性金属尺寸效应、晶面和形貌效应以及载体效应(晶相、孔道和酸碱性);(2)高性能催化剂的设计新策略,如单原子催化剂、核壳结构催化剂、金属-离子液复合催化体系以及载体的形貌调控;(3)催化剂的反应机理和失活机理.提出了1,3-丁二烯选择性加氢高性能催化剂开发面临的挑战,并对潜在的发展方向进行了展望.本文认为随着纳米技术和金属纳米材料合成方法的快速发展,对贵金属活性组分进行原子层面上的调控(包括形貌、尺寸以及单原子配位环境等)已成为可能.这将有助于研制出一类新型高性能选择性加氢催化材料,从而实现高转化率条件下高附加值单烯烃的定向转化.此外,载体的酸碱性和孔道结构的调控有助于进一步调节催化剂的抗积炭性能,也是未来发展的一个重要方向.     

改性多孔CO2吸附剂的研究进展

由温室效应带来的全球变暖等一系列环境危害已受到越来越多的关注,CO2是对温室效应贡献最大的气体且用途广泛,因此,其控制减排及再利用尤为重要.综述了近年被广泛研究的CO2多孔吸附剂的发展状况,详尽阐述了沸石、多孔炭、有机金属骨架(MOFs)和多种介孔吸附剂的优缺点及其改性方法,同时比较了这几种多孔吸附剂改性前后的特性及其对CO2的吸附效果.并且展望了CO2吸附剂的发展前景,为新型高效CO2吸附剂的研发提供了参考.     

Efficient CO2 to CO conversion at moderate temperatures enabled by the cobalt and copper co-doped ferrite oxygen carrier

Chemical looping technology holds great potential on efficient CO2 splitting with much higher CO production and CO2 splitting rate than photocatalytic processes.Conventional oxygen carrier requires high temperature(typically 850–1000°C)to ensure sufficient redox activity,but the stable and high CO2 conversion is favored at a lower temperature,leading to the degrading on the reaction kinetics as well as the low CO production and CO2 splitting rate.In this paper,we prepared several ternary spinels and demonstrated their performance for chemical looping CO2 splitting at moderate temperatures.Using the promotion effect of Cu to cobalt ferrite reduction and reversible phase change of the reduced metals,Cu0.4 Co0.6 Fe2 O4 exhibits high CO2 splitting rate(144.6μmol g–1 min–1)and total CO production(9100μmol g–1)at 650°C.The high performance of this earth-abundant spinel material is also consistent in repeated redox cycles,enabling their potential in industrial use.     

Microporous Hypercross-linked Conjugated Quinonoid Chromophores of Anthracene: Novel Polymers for CO2 Adsorption

Microporous hypercross-linked conjugated quinonoid chromophores represent a novel class of amorphous polymers, synthesized by the reaction of anthracene with dimethoxy methane in the presence of FeCl3 catalyst. Their N2 adsorption isotherms confirm their microporous nature. Diffuse reflectance UV-Visible(DRS UV-Vis) spectroscopy confirms their matrix built with the conjugated quinonoids by their broad light absorption characteristics extending from 1000 nm to 200 nm with the absorbance maximum close to 400 nm. The catalyst cross-linked anthracene with ―CH2― bridges and subsequently dehydrogenating them to form quinonoids. Their Fourier transform infrared(FTIR) spectra showed their characteristic quinonoid vibrations between 1600 and 1700 cm-1. The synthesis of polymers was carried out at 30, 40, 50, 60, 70 and 80 ℃, but the quinonoid content of the polymer obtained at 80 ℃ was higher than that of the others. Their scanning electron microscopy(SEM) images showed microspheres of 1 to 5 μm size built with tiny particles. Their surfaces were not smooth. The polymer synthesized at 80 ℃ showed 5.1 wt% CO2 sorption at 25 ℃ and 0.1 MPa, but when it was recross-linked, the CO2 sorption increased to 8 wt%. Hence, hypercross-linked conjugated quinonoid chromophores of anthracene are good for sorption of CO2.     

Advances in high carbon dioxide separation performance of poly(ethylene oxide)-based membranes

Poly(ethylene-oxide)(PEO)-based membranes have attracted much attention recently for CO2 separation because CO2 is highly soluble into PEO and shows high selectivity over other gases such as CH4 and N2.Unfortunately,those membranes are not strong enough mechanically and highly crystalline,which hinders their broader applications for separation membranes.In this review discussions are made,as much in detail as possible,on the strategies to improve gas separation performance of PEO-based membranes.Some of techniques such as synthesis of graft copolymers that contain PEO,cross-linking of polymers and blending with long chains polymers contributed significantly to improvement of membrane.Incorporation of ionic liquids/nanoparticles has also been found effective.However,surface modification of nanoparticles has been done chemically or physically to enhance their compatibility with polymer matrix.As a result of all such efforts,an excellent performance,i.e.,CO2 permeability up to 200 Barrer,CO2/N2 selectivity up to 200 and CO2/CH4 selectivity up to 70,could be achieved.Another method is to introduce functional groups into PEO-based polymers which boosted CO2 permeability up to 200 Barrer with CO2/CH4 selectivity between 40 and 50.The CO2 permeability of PEO-based membranes increases,without much change in selectivity,when the length of ethylene oxide is increased.