基于MATLAB(SIMULINK)的电弧炉电极调节系统FUZZY-PD控制器的仿真

介绍了采用MATLAB V5.2提供的模糊逻辑工具箱来设计研究电孤纺电极调节系统中的模糊－－PD控制器，讨论了在SIMULINK环境下模糊－PD控制器的参数自调速原理、结构、建立模糊控制规则库和模糊推论方法，并给出仿真结果与结论。     

Estimation of dynamic properties of attractors observed in hollow copper electrode atmospheric pressure arc plasma system

Understanding of the basic nature of arc root fluctuation is still one of the unsolved problems in thermal arc plasma physics. It has direct impact on myriads of thermal plasma applications being implemented at present. Recently, chaotic nature of arc root behavior has been reported through the analysis of voltages, acoustic and optical signals which are generated from a hollow copper electrode arc plasma torch. In this paper we present details of computations involved in the estimation process of various dynamic properties and show how they reflect chaotic behavior of arc root in the system.     

An improved algorithm for decomposing arc flows into multipath flows

We consider a multipath maximum flow problem introduced by Kishimoto (Networks 27(4)(1996)279-291). The focus is on efficient transformation from arc flows into multipath flows, where a multipath flow is a nonnegative combination of multipaths. A new algorithm that is more efficient than existing ones is proposed for the transformation.     

Multiscale Finite Element Modeling of Arc Dynamics in a DC Plasma Torch

The dynamics of the electric arc inside a direct current non-transferred arc plasma torch are simulated using a three-dimensional, transient, equilibrium model. The fluid and electromagnetic equations are solved numerically in a fully coupled approach by a multiscale finite element method. Simulations of a torch operating with argon and argon–hydrogen under different operating conditions are presented. The model is able to predict the operation of the torch in steady and takeover modes without any further assumption on the reattachment process except for the use of an artificially high electrical conductivity near the electrodes, needed because of the equilibrium assumption. The results obtained indicate that the reattachment process in these operating modes may be driven by the movement of the arc rather than by a breakdown-like process. It is also found that, for a torch operating in these modes and using straight gas injection, the arc will tend to re-attach to the opposite side of its original attachment. This phenomenon seems to be produced by a net angular momentum on the arc due to the imbalance between magnetic and fluid drag forces.     

Nash multiplicities and isolated points of maximum multiplicity

Let X be an algebraic variety defined over a field of characteristic zero, and let $\xi \in \underset{\_}{\mathrm{Max}}\mathrm{mult}(X)$ be a point in the closed subset of maximum multiplicity of X. We provide a criterion, given in terms of arcs, to determine whether ξ is isolated in $\underset{\_}{\mathrm{Max}}\mathrm{mult}(X)$. More precisely, we use invariants of arcs derived from the Nash multiplicity sequence to characterize when ξ is an isolated point in $\underset{\_}{\mathrm{Max}}\mathrm{mult}(X)$.     

Improving the performance of all-solid-state supercapacitors by modifying ionic liquid gel electrolytes with graphene nanosheets prepared by arc-discharge

Ionic liquid gel polymers have widely been used as the electrolytes in all-solid-state supercapacitors, but they suffer from low ionic conductivity and poor electrochemical performance. Arc discharge is a fast, low-cost and scalable method to prepare multi-layered graphene nanosheets, and as-made graphene nanosheets （denoted as ad-GNSs） with few defects, high electrical conductivity and high thermal stability should be favorable conductive additive materials. Here, a novel ionic liquid gel polymer electrolyte based on an ionic liquid （EM1MNTF2） and an copolymer （P（VDF-HFP）） was modified by the addition of ad-GNSs as an ionic conducting promoter. This modified gel electrolyte shows excellent thermal stability up to 400 ℃ and a wide electrochemical window of 3 V. An all-solid-state supercapacitor based on commercial activated carbon was fabricated using this modified ionic liquid gel polymer electrolyte, which shows obviously improved electrochemical behaviors compared with those of the corresponding all-solid-state supercapacitor using pure ionic liquid gel polymer electrolyte. Specially, smaller internal resistance, higher specific capacitance, better rate performance and cycling stability are achieved. These results indicate that the ionic liquid gel polymers modified by ad-GNSs would be promising and suitable gel electrolytes for high performance all-solid-state electrochemical devices.     

低能离子对酪氨酸溶液损伤作用的光谱研究初报

利用气体我放电产生低能离子,其在放电间隙的电场加速下撞击水溶液样品。了低能离子作用后酪氨酸溶液的紫外及红外吸收光谱的变化。结果表明,气体放电产生的离子对Ｔｙｒ造成了多种损伤。不仅使化学键断裂,分子解体,而且外来的活性离子会与溶液中的元素形成新的化学基团,妆在受损伤分子碎片上组成新的损伤物质,充分体现了低能离子与物质相互作用的“离子沉积”效应。     

An Arc as the Inverse Limit of a Single Bonding Map of Type N on [0,1]

Let I = [0, 1], c ₁, c ₂ ∈ (0, 1) with c ₁ < c ₂ and f : I⊸I be a continuous map satisfying: are both strictly increasing and is strictly decreasing. Let A = {x ∈ [0, c ₁]∣f(x) = x}, a=max A, a ₁ =max(A\{a}), and B = {x ∈ [c ₂, 1]∣f(x) = x}, b=minB, b ₁ =min(B\{b}). Then the inverse limit (I, f) is an arc if and only if one of the following three conditions holds: (1) If c ₁ < f (c ₁) ≤ c ₂ (resp. c ₁ ≤ f (c ₂) < c ₂), then f has a single fixed point, a period two orbit, but no points of period greater than two or f has more than one fixed point but no points of other periods, furthermore, if A≠φ and B≠φ, then f (c ₂) > a (resp. f (c ₁) < b). (2) If f (c ₁) ≤ c ₁ (resp. f (c ₂) ≥ c ₂), then f has more than one fixed point, furthermore, if B≠φ and A\ {a} ≠φ, f (c ₂) ≥ a or if a ₁ < f (c ₂) < a, f ² (c ₂) > f (c ₂), (resp. f has more than one fixed point, furthermore, if A≠φ and B\{b}≠φ, f (c ₁) ≤ b or if b < f (c ₂) < b ₁, f ² (c ₁) < f (c ₁)). (3) If f (c ₁) > c ₂ and f (c ₂) < c ₁, then f has a single fixed point, a single period two orbit lying in I\(u, v) but no points of period greater than two, where u, v ∈ [c ₁, c ₂] such that f (u) = c ₂ and f (v) = c ₁. Supported by the National Natural Science Foundation of China (No. 19961001, No. 60334020) and Outstanding Young Scientist Research Fund. (No. 60125310)     

Carbon linear chains inside multiwalled nanotubes

Multiwalled carbon nanotubes have been deposited on graphite cathodes by using an arc discharge technique in He atmosphere, with the insertion of a catalytic Ni-Cr mixture as well as without catalysers. The topography of such deposition has been investigated by SEM, while a parallel micro-Raman study has revealed, in particular regions of the deposited cathodes, strong bands in the range 1780-1860 cm⁻¹, assignable to linear carbon chains inside the nanotubes. The variation of intensity, frequency and bandwidth of such bands has been investigated, in relation with the spectral characters of the host multiwalled carbon nanotube. In the cathode deposited without catalyst a quite ordered configuration of multiwalled carbon nanotubes is obtained in the central zone, while the maximum concentration of linear carbon chains is found in a ring shaped zone just inside the border. In sample obtained with catalyst the deposited multiwalled carbon nanotubes appear always more disordered, and a remarkable concentration of carbon chains appears in some zones, with a more casual distribution.     

Effects of pulsed bias duty ratio on microstructure and mechanical properties of TiN/TiAlN multilayer coatings

TiN/TiAlN multilayer coatings were deposited on M2 high speed steel by a pulsed bias arc ion plating system. The effect of pulsed bias duty ratio on the microstructure, mechanical and wear properties was investigated. The amount of macroparticles reduced with the increase of the duty ratio. The surface roughness was 0.0858 μm at duty ratio of 50%. TiN/TiAlN multilayer coatings were crystallized with orientations in the (1 1 1), (2 0 0) (2 2 2) and (3 1 1) crystallographic planes and the microstructure strengthened at (1 1 1) preferred orientation. At duty ratio of 20%, the hardness of TiN/TiAlN multilayer coatings reached a maximum of 3004 HV, which was 3.2 times that of the substrate. The adhesion strength reached a maximum of 77 N at 50% duty ratio. Friction and wear analyses were carried out by pin-on-disc tester at room temperature. Compared with the substrate, all the specimens coated with TiN/TiAlN multilayer coatings exhibited better tribological properties.