SnSxSe2-x单晶纳米片的可控制备与表征

锡二硫族化合物可以通过改变硫和硒的含量来连续调控三元合金材料的带隙、载流子浓度等物理化学性质,在电子和光电子器件应用上具有巨大的潜力。本文采用化学气相沉积(CVD)技术可控地制备了不同元素组分的SnS_xSe_2-x(x=0,0.2,0.5,0.8,1.0,1.2,1.5,1.8,2.0)单晶纳米片。采用扫描电子显微镜(SEM)、原子力显微镜(AFM)、能量色散X射线光谱(EDS)、透射电子显微镜(TEM)以及拉曼光谱等手段对SnS_xSe_2-x纳米片进行了综合表征。结果表明本方法成功实现了元素百分比可调的SnS_xSe_2-x单晶纳米片的可控制备。重点研究了依赖于元素百分比的SnS_xSe_2-x的拉曼特征谱,实验结果与基于密度泛函理论(DFT)的第一性原理计算得到的SnS_xSe_2-x的拉曼仿真谱高度吻合,理论计算结果较好地诠释了实验拉曼光谱发生变化的原因。本研究提供了一种元素百分比可调的三元SnS_xSe_2-x单晶纳米片的可控制备方法,同时对锡二硫族化合物的明确、无损识别提供了方案。     

单层MXene纳米片Ti2N电磁特性的过渡金属(Sc、V、Zr)掺杂效应

二维材料MXene纳米片由于具有较大的比表面积和较高的电子迁移率而受到广泛的关注。本文采用基于密度泛函理论的第一性原理计算,对单层MXene纳米片Ti₂N电磁特性的过渡金属(Sc、V、Zr)掺杂效应进行了系统研究。结果表明,所有过渡金属掺杂体系结合能均为负值,结构均稳定;其中Ti₂N-Sc体系的形成能为-2.242 eV,结构更易形成,且保持稳定;掺杂后Ti₂N-Sc、Ti₂N-Zr体系磁矩增大;此外,Ti₂N-Sc体系中保留了较高的自旋极化率,达到84.9%,可预测该体系在自旋电子学中具有潜在的应用价值。     

高亲和力抗eGFP纳米抗体的筛选与应用

将增强型绿色荧光蛋白（Enhanced Green Fluorescent Protein, eGFP）免疫羊驼后构建纳米抗体免疫库,固相淘选eGFP纳米抗体;构建E.coli Rosetta表达载体,诱导表达纳米抗体,并鉴定其结合活性及特异性;辣根过氧化物酶（Horseradish peroxidase, HRP）标纳米抗体,确定其工作浓度及稳定性;将纳米抗体与纳米磁珠偶联应用于免疫沉淀B13-EGFP融合蛋白。四免后抗血清滴度超过1.28×106,获得库容量为1.85×108 cfu的抗eGFP纳米抗体噬菌体展示文库;原核表达10种独特基因序列的纳米抗体,均为可溶性表达;采用ForteBio Octet确定出纳米抗体4-28与eGFP的亲和常数（KD）最高,达到9.67×10-11M;纳米抗体4-28与eGFP、绿色荧光蛋白（Green Fluorescent Protein, GFP）特异性结合;HRP标记纳米抗体4-28检测范围是1:10 000～1:25 000(浓度100～40 ng·mL-1),比市场上现有的检测二抗（稀释范围1:5 000～1:20 000）灵敏度更高;纳米抗体4-28偶联羧基化纳米磁珠,免疫沉淀B13-eGFP融合蛋白,实现了简单快速分离目的蛋白B13-eGFP。     

分子刚度对膜锚定受体-配体结合动力学影响的理论与模拟研究

人体内大部分生物学过程都离不开细胞黏附.细胞黏附行为主要由锚定于细胞膜上的特异性分子（又称受体和配体）的结合动力学关系来决定.已有研究表明，特异性分子的结合关系受外力及细胞膜波动等多种因素影响.然而，特异性分子刚度对细胞膜锚定受体 配体结合关系的影响机制仍不清楚.近期关于新冠病毒强传染力的研究表明，特异性黏附分子刚度对病毒与细胞结合具有重要影响.该文通过建立生物膜黏附的粗粒度模型，借助分子模拟和理论分析来研究分子刚度在黏附中的作用.结果表明，始终存在一个最佳膜间距及最佳分子刚度值，使得黏附分子亲和力和结合动力学参数达到最大值.这项研究不仅能加深人们对细胞黏附的认知，还有助于指导药物设计、疫苗研发等.     

中空介孔SiO2纳米球的制备、改性及其对Al3+荧光识别研究

中空介孔SiO2由于中空多孔的结构而常用作功能材料的基底.将中空介孔SiO2进行官能团修饰,并应用为荧光传感材料是中空介孔SiO2一个重要的研究领域.本论文采用聚丙烯酸(PAA)为中空模板,聚醚F127为造孔剂,正硅酸乙酯(TEOS)为硅源,氨水为催化剂在乙醇体系中制备了中空介孔SiO2纳米球.系统研究了搅拌速度和聚醚F127引入量对中空介孔SiO2纳米球形貌及比表面积的影响.通过透射电镜、N2-等温吸附脱附曲线等表征说明该合成方法具有很好的普适性,通过调节F127的引入可以实现对比表面积的有效控制.通过氨基化、席夫碱反应进行荧光修饰,进一步研究表明荧光修饰后的中空介孔SiO2纳米球在水溶液中能够实现对Al3+的有效检测,检测限为1.19×10 -7M.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

聚变堆相关的液态金属膜流初步实验研究

在磁约束核聚变堆的面对等离子部件设计中,液态金属锂膜流因具有带走杂质、保护面对等离子固壁等优点而被认为是优选方案之一. 然而,如何克服聚变堆中强磁场环境下产生的磁流体力学效应并形成大面积均匀铺展锂膜流动是目前亟需解决的问题.本文通过搭建室温液 态镓铟锡回路和高温液态锂回路,开展了两种不同特性的液态金属膜流实验, 并采用传统可视化方法获得了展向磁场存在时镓铟锡和锂在导电底板形成的液膜流动表面特征.实验结果 表明: 无磁场时,两种液态金属膜流流动表面波动特性与常规流体膜流均一致, 即随着流动雷诺数的增加表面波动变得更为混乱; 而展向磁场存在时,镓铟锡膜流表面波动变得更为规则, 且沿着磁场方向平行排列,表现为拟二维波动的特征; 而锂膜流却产生了明显的磁流体 力学阻力效应,表现为在流动方向局部产生锂滞留现象, 且滞留点随雷诺数增大向下游移动. 最后通过膜流受力分析,进一步阐述了锂膜流受到比镓铟锡膜流更为严重磁流体力学效应影响的原因.      

边缘效应对织构化Si-DLC膜油中摩擦学性能的影响

引起边缘应力集中的边缘效应是影响边界润滑条件下织构材料摩擦学性能的重要因素之一.本文中采用激光加工、电化学和机械抛光的方法在不锈钢表面制备了边缘未修形和修形凹坑织构,在此基础上采用溅射/射频化学气相沉积技术沉积了Si-DLC膜,研究了边缘修形对织构化薄膜在油中摩擦学性能的影响.基于有限元方法分析了加载条件下凹坑织构接触界面的应力分布,考察了修形对边缘效应的影响.结果表明:边缘修形可大幅降低凹坑织构化薄膜与不锈钢对偶球配副间的摩擦以及对偶的磨损.织构的摩擦学性能与边缘效应呈正相关关系,边缘修形可使凹坑边缘的最大接触应力降低30%左右,有利于缓和凹坑边缘的刮擦作用从而降低织构材料的摩擦磨损.