Synthesis and photocatalytic properties of core–shell TiO~2@ZnIn_2S_4 photocatalyst

A novel core–shell TiO2@ZnIn2S4composite has been synthesized successfully by a simple and flexible hydrothermal route using TiO2as precursors.The as-synthesized samples were characterized by X-ray diffraction,UV–vis diffuse reflectance spectra and transmission electron microscopy.The photocatalytic properties of samples were tested by degradation of aqueous methylene blue（MB）under visible light irradiation.It was found that the as-synthesized TiO2@ZnIn2S4photocatalyst was more effcient than TiO2and ZnIn2S4in the photocatalytic degradation of MB.Moreover,TEM images confrmed the TiO2@ZnIn2S4nanoparticles possessed a well-proportioned core–shell morphology.     

可见光响应光触媒的测试研究

在液-固相光催化反应体系,采用自旋捕捉-电子自旋共振（ESR）技术,进行可见光响应光触媒的测试研究。在光催化反应体系中加入自由基捕捉剂5-二乙氧基磷酰基-5-甲基-1-吡咯啉-氮氧化物（DEPMP0）,测试不同的光辐射条件下溶液的ESR波谱,测试跟踪光催化反应过程中自由基的动态。本法简便、准确、快捷,可用于光触媒性能的测试以及光催化反应机理的研究。     

铕掺杂纳米二氧化钛透明光触媒乳液的制备及光催化性能研究

本文采用常温络合—控制水解法,以TiCl_4,有机羧酸,氨水,硝酸铕,D-山梨醇等为主要实验药品,制备了Eu掺杂纳米TiO_2光触媒乳液。以酸性红3R染料为待降解物,分别考察了不同条件下制备的TiO_2光触媒乳液在太阳光模拟器生成光照射下的光催化性能。此外,还考察了Eu掺杂纳米二氧化钛透明光触媒乳液对于不同浓度染料的光催化性能。通过酸性红3R染料的降解实验,研究了影响Eu掺杂纳米二氧化钛透明光触媒乳液光催化活性的因素。通过X射线衍射仪(XRD)、纳米激光粒度分析仪、紫外可见分光光度计(UV-Vis)等对样品进行表征。结果表明:样品的平均粒度为4.1 nm左右,晶型为锐钛矿,样品的吸收光谱可拓宽至可见光区。当Eu掺杂量为0.3%,pH值为6,回流时间是15 min时,制备的Eu掺杂纳米二氧化钛光触媒乳液的光催化性能最佳。该光触媒乳液经太阳光照射1 h之后,对浓度为25 mg/L的酸性红3R模型反应物的降解效率最高,达到97%以上。     

Synthesis of TiO2/ZnSn（OH）6 Hollow Nano-composite via a Simultaneous Crystallization-etching Route as Photocatalyst

We report the synthesis of TiO2/ZnSn（OH）6 as a novel nano-composite material via a simultaneous crystallization-etching route with cubic nano-ZnSn（OH）6 and TiF4 as the precursors. The structure, composition and morphology of the composite were characterized by XRD, EDS, FETEM and FESEM, which showed the prepared TiO2/ZnSn（OH）6 had a unique morphology of hollow cubic nano-ZnSn（OH）6 attached with rutile TiO2 nanoparticles. The results of photocatalytic activity measurement indicated the photocatalytic activity of the prepared composite was better than that of nano-ZnSn（OH）6. This study may be helpful for the design and fabrication of functional comoosite materials.