Theory of interfacial phase transitions in surfactant systems

The spin-1 Ising model, which is equivalent to the three-component lattice gas model, is used to study wetting transitions in three-component surfactant systems consisting of an oil, water, and a nonionic surfactant. Phase equilibria, interfacial profiles, and interfacial tensions for three-phase equilibrium are determined in mean field approximation, for a wide range of temperature and interaction parameters. Surfactant interaction parameters are found to strongly influence interfacial tensions, reducing them in some cases to ultralow values. Interfacial tensions are used to determine whether the middle phase, rich in surfactant, wets or does not wet the interface between the oil-rich and water-rich phases. By varying temperature and interaction parameters, a wetting transition is located and found to be of the first order. Comparison is made with recent experimental results on wetting transitions in ternary surfactant systems.This paper is dedicated to J. K. Percus in honor of his 65th birthday.     

Rigorous Generalization of Young's Law for Heterogeneous and Rough Substrates

We consider a SOS type model of interfaces on a substrate which is both heterogeneous and rough. We first show that, for appropriate values of the parameters, the differential wall tension that governs wetting on such a substrate satisfies a generalized law which combines both Cassie and Wenzel laws. Then in the case of an homogeneous substrate, we show that this differential wall tension satisfies either the Wenzel's law or the Cassie's law, according to the values of the parameters.     

Wetting at a polymer gel–vapor interface; a system not influenced by a long-range van der Waals contribution

The exterior of a cross-linked polymer gel resembles a polymer brush. Such gel including its brush can be swollen by a good solvent. The detachment of the solvent–vapor (L–V) interface from the brush is controlled by the adsorption of polymer segments onto this interface and is to a very good approximation not influenced by long-range van der Waals contributions. A wetting transition in this system coincided with the adsorption–desorption transition for chains onto such L–V interface and has various unusual features. There are several indications that in practice this system should feature a second-order wetting transition.     

Fine Structure of Meniscus of a Wetting Liquid

Equilibrium of a capillary meniscus near a wetting film on a solid in a gravitational field is considered. Unlike previous studies, the present study proves that the fine meniscus structure in a gravitational field is a universal feature—it takes place in a wide variety of problems. In the general case, the capillary meniscus is at a certain distance from the wetting film and does not intersect it. The relation for the minimum distance from the arbitrary meniscus to the solid generalizes the Derjaguin formula for a flat slit. An equation that optimally approximates the meniscus with due account of the contribution of the meniscus/film transition region is derived. A refined solution to the problem of a meniscus on a vertical plate is derived within the perturbation theory. Both gravity and nonuniformity of the vertical static film above a capillary–gravitational meniscus do not affect the minimum distance (the influence is less than 0.0001). A general method for solving sophisticated problems of capillary equilibrium in gravitational field is proposed.     

Pressure effect on grain boundary wetting at various temperatures

Bicrystals of Fe-6 at.% Si alloy containing <001> 5 tilt grain boundaries with a deposited zinc layer have been annealed at various hydrostatic pressure at four temperatures between 700° and 905°C. After the anneals the dihedral angle of the grain boundary groove formed at the site of the grain boundary intersection with the solid-melt interphase boundary has been measured. The transition from complete to incomplete wetting of the grain boundary by the zinc-rich melt (dewetting phase transition) has been found to occur as the pressure increased at all temperatures studied. The temperature dependence of the dewetting transition pressure p _w has been determined. That dependence has a minimum at a temperature of 790°C, which is close to the peritectic temperature in the Fe–Zn system (782°C). A thermodynamic analysis of the wetting phenomena in the two-component system, based on Becker's regular solution model for the surface tension of the interphase boundary, explains the minimum in the p _w (T) dependence.     

Investigation on spontaneous ignition of two kinds of organic material with water

A systematic investigation was performed to elucidate the cause of spontaneous ignition of Refuse Derived Fuel (RDF) and Meat Bone Meal (MBM). Heat generation in both RDF and MBM with addition of water liquid and vapor at room temperature was determined by isothermal calorimetry. Compared with water liquid, the heat of wetting by sorption of water vapor at 80% relative humidity and 25 °C was larger, which can raise the temperature of RDF and MBM more than 30 and 56 °C, respectively. Heat generation due to fermentation occurred and the temperature of RDF and MBM reached or exceeded 80 °C after 5 days for RDF and 4 days for MBM at 100% RH. The spontaneous ignition for RDF and MBM results from heat of wetting and fermentation at room temperature and a further exothermic reaction at higher temperature.     

Influence of 1-decanol on the surface tension and wetting power of a new anionic surfactant derived from sugar

We studied the adsorption behaviour at the liquid/air and liquid/solid interface of a new anionic surfactant derived from sugar, the sodium decyl galacturonate. The surface tension of aqueous solutions, measured in equilibrium and as a function of time, is particularly affected by the presence of decanol, synthesis residue, which amount ranges between about 0 and 13%. The surface tension lowering is accelerated in presence of decanol, owing to its rapid diffusion to the interface or/and because it affects the mobility and adsorption process of the anionic surfactant molecules. The wetting power of surfactant solutions were also investigated in relation with textile treatment applications. We measured the kinetics of absorption of surfactant solutions in a piece of standard cotton and compared it to the absorption of pure decanol, a completely wetting liquid and to the absorption of an alkylpolyglucoside. The time at which the fabric piece is saturated appears to be related to the adsorption of surface-active molecules on the fibers at the advancing liquid front/fabric contact line. Decanol was found to promote absorption and micellar life-time seem to reflect the differences observed at high concentration. This study shows the importance of controlling the amount of surface-active residues which may alter the kinetics of surfactant adsorption, particularly in industrial processes where equilibrium conditions are not reached.     

Coating of Tetraethylorthosilicate (TEOS)/Vinyltriethoxysilane (VTES) Hybrid Solution on Polymer Films

Tetraethylorthosilicate (TEOS)/vinyltriethoxysilane (VTES) hybrid materials were prepared and the hydrolysis and condensation reactions during processing were investigated by means of 29Si NMR solution spectroscopy. The variation of drying characteristics of the coating films was examined with respect to the tetraethylorthosilicate (TEOS)/vinyltriethoxysilane (VTES) ratio, as well as drying temperature, by FT-IR spectroscopy. It is shown that the TO mode of Si–O–Si stretching absorption was enhanced with increasing tetraethylorthosilicate (TEOS) content and drying temperature. Also, the wettability of the coating films on polymer films was independent of the solution composition but enhanced by the precoating of poly(4-hydroxystrene) (PHS) as a wetting agent. The adhesion between the coating and the films was also enhanced when the vinyltriethoxysilane (VTES) content in the coating solution was increased.     

Topologies of capillary condensation

Calculations are presented to illustrate the dependence of capillary adsorption upon the interactions present in model pores. The sequence of phase transitions at zero temperature is determined for a Lennard-Jones lattice gas in a pore consisting of 4 × 4 × sites. The dependence of the specific filling sequence upon the comparative strength of the gas-pore wall and the gas-gas interaction well-depths is determined. Grand canonical Monte Carlo simulations of sorption at finite temperature in the continuum version of the same model pore are also reported. Both the theory and the simulations were performed with variable gas-solid and gas-gas energy well-depths. At a temperature of 90 K, the gas-solid heterogeneity associated with atoms adsorbed in the corners, on the walls and in the interior pore volume gives rise to sequential adsorption similar to that observed in the lattice gas calculation at 0 K. A gradual approach to non-wetting behavior is observed as the gas-solid well-depth decreases. Values of the gas-solid well-depth needed to produce pore filling at saturation (i.e., pore-wetting) are discussed.