A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.     

Ce偶-偶同位素低激发态性质的IBM2描述

通过考虑同类核子相干对间的四极相互作用，在IBM2中对Ce偶－偶同位素^128Ce-^138Ce的低激发态能谱和E2跃迁几率及分支比进行了理论分析，计算结果有效地改善了IBM中这些核的γ带能谱的Staggering现象描述，与实验观察到的低激发态结果基本一致。     

Cooling,identification and spectroscopy of super-heavy element ions

We briefly discuss some possibilities for cooling, identification and spectroscopy of super-heavy element (SHE) ions based on recent results obtained from studies of atomic and molecular ions in linear rf traps. Since these investigations only relied on the charge and the mass of the ion of interest, we believe it should be straight forward to adopt most of the techniques for SHE ion research.     

Accuracy and long-term reproducibility of lead isotopic measurements by multiple-collector inductively coupled plasma mass spectrometry using an external method for correction of mass discrimination

The precision of isotopic measurements of Pb by thermal ionization mass spectrometry (TIMS) is limited by the fact that this element does not possess an invariant isotope ratio that can be used for the correction of mass fractionation by internal normalization. Multiple-collector inductively coupled plasma mass spectrometry (MC-ICPMS) can overcome this limitation, because with plasma ionization, elements with overlapping mass ranges are thought to display identical mass discrimination. With respect to Pb, this can be exploited by the addition of Tl to the sample solutions; the mass discrimination factor obtained for Tl can then be used for the correction of the measured Pb isotope ratios. In this article we present the results of a detailed study that investigates the accuracy and precision of such an external correction technique for mass discrimination based upon the results of multiple analyses of a mixed standard solution of NIST SRM-981 Pb and SRM-997 Tl. Our data indicate that normalization of the Pb isotope ratios to the certified isotopic composition of SRM-997 Tl produces Pb isotopic results that are significantly lower than recently published reference values by TIMS. This systematic offset can be eliminated by renormalization of the Pb data to a different Tl isotopic composition to obtain an empirically determined mass discrimination factor for Pb that generates accurate results. It is furthermore shown that a linear law is least suited for the correction of mass discrimination, whereas a power or exponential law function provide significantly more accurate and precise results. In detail, it appears that a power law may provide the most appropriate correction procedure, because the corrected Pb isotope ratios display less residual correlations with mass discrimination compared to the exponentially corrected data. Using an exponential or power law correction our results, obtained over a period of over seven months, display a precision (2σ) of better than 60 parts per million (ppm) for ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁷Pb/²⁰⁶Pb and of better than 350 ppm for ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb. This represents a significant improvement compared to conventional TIMS techniques and demonstrates the potential of MC-ICPMS for routine, high-precision measurements of Pb isotopic compositions.     

冠醚B15C5萃取分离锂同位素的阴离子效应

本文研究了B15C5冠醚萃取锂盐时,不同阴离子对体系的同位素分离效应的影响。结果表明,阴离子在冠醚萃取过程中不仅对萃取络合物的稳定性有显著影响,而且阴离子半径及软度越大时,萃取体系的锂同位素分离系数(α_(LI))也越大。     

REE AND Sr, Nd, Pb ISOTOPIC GEOCHEMISTRY OF HUANGYISHAN BASALT, KUANDIAN, LIAONING, NORTHEAST CHINA

In the light of major element geochemistry, mineral chemistry and REE and isotopic data, the small but apparent isotopic differences between the Cenozoic volcanic rocks east and west of the Tancheng-Lujiang fault are believed to be caused by the mixing and metasomatism of crustal and mantle material in tho mantle source region in response to Pacific plate subduction. The presence of phlogopite and pargasite in mantle xenoliths lends strong support to mantle metasomatism.     

Distribution of Helium Isotopes in Western Pacific Upper Layer

3He/4He ratios in samples of sea water obtained at depths from surface to 300 m in the upper layer of the Western Pacific Ocean were measured by a mass spectrometer VG5400. The lateral and vertical distribution of He isotopes in the studied area was discussed in detail on the basis of 3He/4He ratios. Excess and depleted 3He. in relation to δ3He value of surface water in equilibrium with air has been discussed in the area, which may be mainly attributed to the incorporation of the North Pacific Intermediate Water with the Equatorial Upwelling and the exchange of water masses between the South China Sea and the Western Pacific, respectively. The present work in Western Pacific has also indicated that He isotopes may be used as a tracer for mixing processes of water masses and oceanic circulation.     

Chemical bond in alkali metal sulfates

In the context of the density functional theory of the local electron density the valence and differential density distribution in crystalline sulfates of M₂SO₄ (M is Li, Rb, and Cs) and double sulfates of MLiSO₄ were calculated using the pseudopotential method in the basis set of numerical atomic pseudo-orbitals. It is shown that in lithium sulfate crystallographically inequivalent oxygen atoms are in different charge states and have a different force of chemical bonding with sulfur. Anions are bonded to each other through lithium atoms that form tetrahedral complexes with oxygen. In rubidium sulfates the electron clouds of the anions overlap and chain structures form. Chemical bonding between the anion and the cation has an ionic nature. These features of the electron structure manifest themselves in double sulfates, where LiO₄ complexes that link the anionic chains also form, and heavy metals serve as cations.     

Cs2CO3 Promoted coupling reactions for the preparation of skipped diynes

An improved methodology for the preparation of copper(I) alkynides has been developed using cesium carbonate as base. In the presence of cesium carbonate and CuI various 1-alkynes were converted smoothly to the corresponding copper alkynides which in situ reacted with propargylic halides in order to synthesize skipped diynes.     

Poly(methylene sebacate): Synthesis and characterization

The synthesis of poly(methylene sebacate) was carried out via the reaction of cesium sebacate with bromochloromethane in N-methylpyrrolidone over a range of temperatures (55–130°C). A number of polymers having limiting viscosity numbers in the range of 0.29–0.94 dL g^?1 (CHCl₃; 25°C) were characterized by elemental analyses, ¹H- and ¹³C-NMR, DSC, and GPC techniques. The polymerization was found to be very rapid at 100°C, being complete in ca. 15 min. and was relatively insensitive to the stoichiometric ratio of the monomers. As high molecular weight polymers were produced without the quantitative conversion of the reactants, the polymerization is considered to be occurring by an interfacial mechanism.