Polymer 4D printing: Advanced shape-change and beyond

4D printing is an exciting branch of additive manufacturing. It relies on established 3D printing techniques to fabricate objects in much the same way. However, structures which fall into the 4D printed category have the ability to change with time, hence the “extra dimension.” The common perception of 4D printed objects is that of macroscopic single-material structures limited to point-to-point shape change only, in response to either heat or water. However, in the area of polymer 4D printing, recent advancements challenge this understanding. A host of new polymeric materials have been designed which display a variety of wonderful effects brought about by unconventional stimuli, and advanced additive manufacturing techniques have been developed to accommodate them. As a result, the horizons of polymer 4D printing have been broadened beyond what was initially thought possible. In this review, we showcase the many studies which evolve the very definition of polymer 4D printing, and reveal emerging areas of research integral to its advancement.     

Polymerization behaviors of racemic and chiral amphiphilic monomers in organized bilayer membranes of lamellar liquid crystalline phase

A racemic amphiphilic monomer, n‐dodecyl glyceryl itaconate (DGI), forms bilayer membranes in water in the presence of small amount of ionic cosurfactant and shows iridescent color. A chiral DGI, S‐DGI, also shows an iridescent property, but with a rather red shift in the color, which can be ascribed to the increased packing density of the monomer in the bilayer membranes. Chrial DGI has a more compact packing density than racemic one owing to closer distance between the monomer molecules; the conversion rate, however, is slower than that of racemic one when H₂O₂ is used as an initiator. When the initiator is changed to an amphiphilic one, 4‐(2‐hydroxyethoxy) phenyl‐(2‐hydroxy‐2‐propyl) ketone (Irgacure 2959), the chiral DGI shows even a little faster conversion rate than that of racemic one. The NMR chemical shift results of protons in benzene ring show that the molecules of Irgacure 2959 insert into the bilayer membranes. The molecular weights of the corresponding polymers prove that the initiation by H₂O₂ is restricted compared to that by Irgacure 2959. It is concluded that the decelerated polymerization behavior of chiral DGI initiated by H₂O₂ is a result of limited diffusion of the initiator into the lamellar bilayer structures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4891–4900, 2007     

Probing antiferromagnetic order with heat capacity in exchange-biased structures

We explore the magnetic heat capacity in exchange-biased ferromagnet/antiferromagnet bilayers theoretically. We show that changes in the antiferromagnetic structure due to the reversal of the ferromagnet layer can be detected by distinct features in the heat capacity. This offers a method for probing antiferromagnetic domains in exchange-biased systems.     

Steady-state oxidation of cholesterol catalyzed by cholesterol oxidase in lipid bilayer membranes on platinum electrodes

Cholesterol oxidase is immobilized in electrode-supported lipid bilayer membranes. Platinum electrodes are initially modified with a self-assembled monolayer of thiolipid. A vesicle fusion method is used to deposit an outer leaflet of phospholipids onto the thiolipid monolayer forming a thiolipid/lipid bilayer membrane on the electrode surface. Cholesterol oxidase spontaneously inserts into the electrode-supported lipid bilayer membrane from solution and is consequently immobilized to the electrode surface. Cholesterol partitions into the membrane from buffer solutions containing cyclodextrin. Cholesterol oxidase catalyzes the oxidation of cholesterol by molecular oxygen, forming hydrogen peroxide as a product. Amperometric detection of hydrogen peroxide for continuous solution flow experiments are presented, where flow was alternated between cholesterol solution and buffer containing no cholesterol. Steady-state anodic currents were observed during exposures of cholesterol solutions ranging in concentration from 10 to 1000 μM. These data are consistent with the Michaelis-Menten kinetic model for oxidation of cholesterol as catalyzed by cholesterol oxidase immobilized in the lipid bilayer membrane. The cholesterol detection limit is below 1 μM for cholesterol solution prepared in buffered cyclodextrin. The response of the electrodes to low density lipoprotein solutions is increased upon addition of cyclodextrin. Evidence for adsorption of low density lipoprotein to the electrode surface is presented.     

羟自由基对支撑磷脂双层膜的破坏及水溶性抗氧化剂保护作用的电化学研究

以支撑磷脂双层膜(supported bilayer lipid membrane, s-BLM)作为生物膜模型, 利用Fenton体系产生羟自由基(hydroxyl free radical, •OH), 采用循环伏安法研究了s-BLM与•OH之间的相互作用. 结果表明: •OH通过与磷脂发生化学反应, 诱发s-BLM上形成孔洞或缺陷, 这种作用对时间、FeSO₄和H₂O₂的浓度具有依赖性, 且不可恢复. 具有还原性基团的抗氧化剂维生素C, 还原型谷胱甘肽和L-半胱氨酸, 通过与•OH发生氧化还原反应, 可抑制•OH与s-BLM的相互作用, 降低•OH对s-BLM结构的破坏程度.     

Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

葡萄球菌肠毒素B基因的膜片电极支撑双层类脂膜核酸传感器的研究

本研究用膜片电极支撑双层类脂膜(BLMs)核酸传感器,检测葡萄球菌肠毒素B(SEB)基因。BLMs在膜片钳尖端形成后,传感器的检测电流大小和施加的电压成正比。通过在BLMs上固定针对SEB基因特异的直链十二烷烃链(0～273.65μg/L)修饰的单链寡核苷酸(C12-ssDNA)探针与膜片钳系统一同构建成膜片电极支撑BLMs核酸传感器。电流大小与探针的浓度呈正相关,线性回归方程I=5.49 2.94C;相关系数r=0.9962。SEB基因浓度在20～5000μg/L范围时,检测的电流信号与SEB基因浓度的自然对数呈负相关,线性回归方程I=1103.26-103.62lnC,相关系数r=0.9977;同时,核酸传感器有很好的特异性,与不产SEB的金葡菌属、其它食物中毒菌的基因组DNA和空白对照组反应无明显电信号响应。应用原子力显微镜对BLMs表面微观结构、ssDNA固定于BLMs上和BLMs上杂交洗脱后的表面微观结构进行观察。本研究构建的膜片电极支撑BLMs核酸传感器为SEB基因的检测提供了一种快速、灵敏、特异性强的方法。     

The interaction of double-charged metal ions with monolayers and bilayers of phospholipids

Electrophoretic mobilities of hexadecane/water emulsions containing dimyristoyl-phosphatidylcholine (DMPC) or egg yolk lecithin (EYL) monolayers at the interface and those of liposomes prepared from the same lipids were measured as functions of the concentrations of Ca²⁺, Mn²⁺, Cu²⁺, and Ni²⁺ cations in the aqueous phase. The surface potentials, surface charge densities (σ), and the Langmuir adsorption isotherms for various distances from the charged surface to the slip plane (d) were calculated on the basis of the Gouy-Chapman theory for 1∶2 electrolytes and the values of ζ-potentials. The binding constants (K) and parametersd were determined under the assumption that the maximum σ values correspond to one ion per phospholipid molecule at the interface. In the case of DMPC, the ion binding constants (L mol⁻¹) at 25°C are 230 and 87 for Ca²⁺, 31.5 and 21 for Mn²⁺, 11 and 6 for Cu²⁺, and 7.5 and 5.3 for Ni²⁺ in liposomes and emulsions, respectively. The affinities of Cu²⁺ and Ni²⁺ ions for EYL monolayers and bilayers are lower than those for DMPC mono- and bilayers. Thed parameters for all ions are smaller than the radii of the hydrated ions. In the case of Ca²⁺, Cu²⁺, and Ni²⁺, thed values for mono- and bilayers are different. The differences in K values between monolayers and bilayers as well as those between DMPC and EYL mono- and bilayers can be attributed to the differences in the local environment and orientation of the interfacial phosphate groups in these systems. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2490–2495, December, 1998.     

胆酸钠与支撑磷脂双层膜作用的电化学研究

采用电化学方法研究胆酸钠(NaC)与s-BLM的相互作用, 并结合实验结果对NaC与s-BLM的作用机理进行了讨论.     

囊泡表面分子间通讯交流体系的构建: 利用受体的分子识别行为调控酶的活性

在人工双层膜囊泡表面, 构建了一个通过人工受体的分子识别行为控制酶反应活性的超分子体系. 体系以生物体细胞信号转导系统为模拟原型, 由作为受体的烷基胺、被受体识别的信号分子吡哆醛衍生物、乳酸脱氢酶、受体和酶之间的媒介物Cu^2＋以及作为体系载体的合成肽脂囊泡五个成分构成．通过UV-vis光谱法及动态光散射测定对体系进行了评价, 结果表明: 随着受体疏水参数增大, 其对信号分子的识别能力增强, 二者呈良好的线性关系; 通过信号分子与囊泡表面静电相互作用的研究表明信号分子具有选择性; 媒介物与信号分子–受体可形成化学计量比为1∶2的配合物, 其形成能力比媒介物与酶的结合能力更强．作为结论, 体系中烷基胺受体对磷酸吡哆醛信号分子的识别有效控制了处于囊泡表面的乳酸脱氢酶的活性．